Absoulte Construction: Local Wood and Vinyl Fencing Serving Lyman, SC 29365

A mix of high humidity, heavy dew, and afternoon shade is common in neighborhoods around Lake Robinson and along US-29. When moisture sits on wood fence boards, it encourages algae, mildew, and moss to grow. This trapped dampness also causes pine or cedar pickets to cup, bow, and crack. Over time, the wood fibers break down, making gates stiff and hard to close. Absoulte Construction sees this a lot in Lyman's older subdivisions, and it usually happens within 2–3 years if the fence was never sealed or pressure washed.

If you run your hand across a fence board and feel a slimy film, or if you see dark green streaks, black spots, or flaky patches—plain water from a garden hose won't get the job done. That slime and stain is embedded algae and dirt that needs a hot-water pressure washer and the right cleaning solution to lift it. Absoulte Construction uses a low-pressure, soft-wash technique for wood fences in Lyman so we don't damage the grain. After a wash, we also check for loose pickets or rusted nails so you can seal or stain it afterward if you want.

Yes, and it's one of our most common handyman calls in Lyman. A gate that sags or drags is a sign that the hinges are pulled loose, the wood has rotted at the hinge screws, or the fence post itself is leaning. We can often fix it by replacing the hinge hardware with longer, stronger screws into solid wood, or by resetting the gate frame with a tension cable. If a post has rotted at ground level, we'll set a new post in concrete. In all cases, we make sure the gate swings level and latches tight without you having to lift it.