Alpine Lawn and Landscape - Dry Prong's Professional Commercial Fencing

The high humidity in Dry Prong frequently causes wooden gates to absorb moisture, leading to warping and overstressed hinges. This often results in the gate dragging on the ground or failing to latch. Our solution typically involves replacing sagged hinges with heavier-duty, galvanized hardware and repairing or replacing the rotted bottom corner of the gate. We also install a tension cable or turnbuckle to pull the gate square. If the fence posts are leaning, we will brace or replace them with treated lumber set in concrete to ensure long-term stability.

Signs of a vulnerable fence include loose posts, rotted wood at the ground line, missing fasteners, or panels that wobble when pushed. In Dry Prong, where hurricane winds can be strong, a fence that isn't properly anchored can become a projectile. We assess your entire fence line for these weak points and secure the structure. Solutions include replacing rotted posts with new concrete-set ones, adding wind bracing, and using weatherproofing stain to protect against moisture. For gates, we install heavy-duty, sag-proof latches and hinges.

Given our heat and humidity, the best method involves a three-step process. First, we clean the wood with a deck wash to remove mildew and dirt. Next, we apply a high-quality, oil-based stain or sealant that penetrates the wood. Finally, we use an additional water-repellent topcoat for critical areas like gate bottoms and post tops. For new installations, we always use pressure-treated pine or rot-resistant cedar, and we seal all end cuts. This routine helps prevent the moisture damage and warping that are common in the Dry Prong area.