Professional Wood and Vinyl Fencing in Austin, TX 78741 - AR Wood Fencing

Gate alignment problems are common here due to shifting clay soils and storm impacts. We start by checking the posts for rot or movement—often the issue is a post that has leaned. We can re-set the post in concrete, reinforce the hinge side with heavier-duty screws or brackets, and adjust the latch side. If the gate itself is warped, we may add a tension cable or replace a section. We then ensure the gate swings freely and latches securely before leaving.

UV damage is a real issue for wood fences in Austin. We recommend cleaning the fence with a mild wood cleaner and a pressure washer on a low setting to remove grayed surface wood and mildew. After it dries, we apply a high-quality semi-transparent stain or a solid color stain that includes UV blockers. This not only restores the color but also adds a layer of protection against moisture and sun. We can also paint the fence if you prefer a more uniform, opaque finish.

Yes. Weatherproofing starts with choosing the right wood—cedar or pressure-treated pine for rot resistance—and proper installation with gaps for drainage. We seal all end cuts and joints with a wood preservative. Then we apply a waterproofing stain or sealant that helps water bead off rather than soak in. This also helps minimize hail damage by keeping the wood fibers flexible. For existing fences, we can strip old paint or stain, repair any hail-damaged boards, and re-seal the entire fence.