Top-Rated Fence Contractors in Hayward, CA 94545 - ATR Welding
22962 Clawiter Rd Ste 5, Hayward, CA 94545
Provided Services
- Fence repair
- Manual gate repair
- Deck repair
- Manual gate installation
- Metal fabrication
- Fence and gate repair
- Deck replacement
- Fence and gate installation
Company Profile
ATR Welding, Inc., founded by Lee Viloria in Hayward, CA in 2013, is a certified welding and fabrication shop serving local homeowners and businesses. With years of experience as a Lead Welder and Inspector at companies like Wolfe Engineering and California's Great America, Lee brings a high standard of craftsmanship to every project. The team specializes in custom metal fabrication, fence and gate installation, and deck repair and replacement. They perform on-site and in-house work using Gas Metal Arc Welding (MIG), Gas Tungsten Arc Welding (TIG), Stick welding, Flux-cored arc welding, and plasma cutting. ATR Welding works with aluminum, carbon steel, cast iron, and stainless steel, following American Welding Society (AWS) procedures. Lee is personally available for project consultations, design solutions, and free estimates. For Hayward residents, ATR Welding addresses common local fencing issues like fence post movement caused by expansive clay soils and UV damage to vinyl fencing. They reinforce posts with proper concrete footings and steel brackets, and for vinyl, they recommend metal post sleeves or aluminum infill for long-lasting durability. Located near the Hayward BART station and a short drive from the Hayward Japanese Gardens, ATR Welding is a trusted resource for quality metalwork and repairs in the 94541 area.
Question Answers
My wooden fence posts are leaning after the rainy season. Can ATR Welding fix that?
Yes, leaning fence posts are a common issue in Hayward due to expansive clay soils. We often dig out the loose post, set it in a concrete footer, and reinforce the base with a steel bracket or custom metal sleeve. This prevents future movement and keeps your fence line straight. We can also replace rotted sections with metal posts for a longer-lasting solution.
What’s the best way to repair a rusted gate that won’t close properly?
Gate sag from rusted hinges or frame damage is a frequent repair we handle. We inspect the entire gate, cut out corroded metal, and weld in new steel or aluminum sections. For manual gates, we also replace worn hinge pins and reinforce the latch area. Our welding follows AWS procedures to match the original strength. We can also retrofit your gate with heavier-duty hinges to prevent future sagging.
Is it better to repair an old deck or completely replace it?
It depends on the extent of the damage. For decks with localized rot or rusted railing connections, we can often cut out the bad sections and weld in new steel supports or replace individual boards. If the underlying frame is compromised or the deck is over 20 years old, full replacement may be more cost-effective and safer. We’ll inspect your deck’s structure and give you a clear, no-pressure recommendation.
Business Location & Hours
| Mon: | 8:00 AM - 5:00 PM |
| Tue: | 8:00 AM - 5:00 PM |
| Wed: | 8:00 AM - 5:00 PM |
| Thu: | 8:00 AM - 5:00 PM |
| Fri: | 8:00 AM - 5:00 PM |
| Sat: | Closed |
| Sun: | Closed |
Compare Similar Fencing Companies in Hayward, CA
Maranatha Fences
Hayward, CA
Affordable Fences
Hayward, CA
Tech Gate Installation and Repair
Hayward, CA
Precise Garage Door And Automatic Gates
3428 Enterprise Ave, Hayward, CA
