Central Penn Welding and Ironworks - Harrisburg's Local Wood and Vinyl Fencing

A sagging gate is usually caused by a broken or rusted weld at the hinge mounting point or a hinge bracket pulling loose from the masonry or wood post. In our area, freeze-thaw cycles also shift buried gate posts over time. At Central Penn Welding, we’ll come out to your Harrisburg property to inspect the gate on-site. If the frame is still in good shape structurally, we can re-weld the hinge section, reinforce the corner joints with a steel gusset, and reattach the hinges to a solid anchor. That’s usually a quicker, more affordable fix than a full replacement.

Rust-out at the bottom of fence panels is common in Harrisburg because of road salt and standing water near curbs. It’s almost always repairable. At Central Penn Welding, we cut out the corroded section, fabricate a new steel piece to match your fence’s original pattern—whether it’s a spear-top, scroll, or flat bar design—and weld it in place. We then grind the weld smooth and apply rust-inhibiting primer. You end up with a solid panel that matches the rest of your fence, without needing to tear out the whole run.

A leaning post is often a sign that the metal post has rotted through just below grade, while the concrete footing itself may still be sound. At Central Penn Welding, we can solve this by exposing the post base, cutting the corroded section off, and welding a new heavy-wall steel post stub onto the existing post. That new stub is then set into the old footing with an epoxy anchor system. You keep the original footing and most of the existing fence, saving time and money. We serve commercial properties throughout Harrisburg, including along the Paxton Street corridor.