Local Fence Contractors in Poolville, TX 76487 - Garcia’s Fencing

Poolville, TX 76487

(817) 832-1495

Company Background

Garcia’s Fencing, located just off Farm-to-Market Road 51 near Poolville’s historic downtown square, specializes in custom metal fabrication for fences and gates. Poolville’s open landscape and gusty winds create two recurring problems: fence post erosion—especially along sandy washes near the old railroad bed—and wind-damaged sections that buckle or pull loose. Garcia’s addresses these issues head-on by fabricating heavy-gauge steel posts with deep-set anchor plates to resist shifting soil, and by reinforcing windward panels with extra bracing and welded joints. Whether you live near the Parker County line or closer to the Silver Creek crossing, their metal work is designed to stand up to local weather. They also weld custom gates, railings, and structural brackets for homeowners and small acreage properties. By combining on-site measurements with in-shop fabrication, Garcia’s ensures each repair or new install fits the specific soil and wind conditions of Poolville.

Service Capabilities

  • Metal fabrication

Common Questions

What causes fence post erosion around Poolville, and how can metal fabrication help?

The sandy, loose soils common along the banks of Silver Creek and near the old railroad grade in Poolville can wash away from wooden posts during heavy rains, leaving fences leaning. Garcia’s Fencing solves this by fabricating steel posts with larger anchor plates or helical flanges that grip deeper into stable soil. The metal resists rot and termite damage, and the custom-shaped base prevents the post from shifting even when the topsoil erodes.

I have sections of my fence that keep getting damaged by wind—what's the best permanent fix?

Wind-damaged sections are a common problem in Poolville’s open fields. Often the failure starts at the joint where the panel meets the post. Garcia’s reinforces these connections by welding heavy-duty brackets and using thicker gauge metal for the framing. They also recommend wind-relief designs, like a small gap or corrugated pattern in the metal panels, which lets gusts pass through without pushing the whole fence over.

Can Garcia’s weld custom metal parts for an existing fence that’s starting to sag?

Yes. Sagging usually comes from a weak horizontal rail or a corroded hinge. Garcia’s will fabricate a replacement brace or gate hinge from galvanized steel right in their shop, matching the existing look. They can also add a steel tension cable or a welded corner bracket to stiffen the whole section without replacing the entire fence.

Business Location & Hours



Mon:7:00 AM - 6:00 PM
Tue:7:00 AM - 6:00 PM
Wed:7:00 AM - 6:00 PM
Thu:7:00 AM - 6:00 PM
Fri:7:00 AM - 6:00 PM
Sat:7:00 AM - 6:00 PM
Sun:Closed


Scroll to Top
CALL US NOW