Hill Country Fencing | Reliable Commercial Fencing in Fredericksburg, TX

The main cause is our unique Hill Country soil: it’s often shallow, rocky, and excessively draining, which means water runs down the post hole and washes away the dirt around the post. This leads to loose, leaning posts. Our solution is to remove the rotted or loosened post, dig a deeper hole, and set the new post in concrete, often with a gravel base for drainage. For posts that keep shifting, we can install a metal post anchor system that grips the post tight and prevents future erosion.

A good first sign is whether the fence still stands straight. If a section is leaning more than a few degrees, the posts likely have a structural failure underground. Also check the rails (the horizontal boards): if they’re cracked or pulled loose from the post, that’s structural. Cosmetic damage usually means just a few broken pickets or loose trim boards. Our team can come out and check the post stability and rail connections. For high-wind areas near the hills, we recommend reinforcing the rail-to-post connection with stronger brackets and using heavier-gauge nails or screws.

Often yes. Gate issues after high winds usually come from posts being pushed out of plumb. We’ll first check if the gate post is still set in solid ground. If the post has moved, we can reset it with concrete. If the post is solid, we’ll adjust the hinges, add a third hinge for heavy gates, or replace sagging hardware. In many cases, a simple hinge adjustment and a new latch will do the trick, and you won’t need a full fence replacement.