KC Fence And Iron Welding Works: Metal Fabrication & Fence Repair in Houston, TX

Strong gusts, common during Houston storms, can loosen the welds or bend the metal frame of iron fences, especially if the original posts were not set deep enough. Our metal fabrication service allows us to cut out warped sections, re-weld new matching pieces, and reinforce the connection points with heavier gauge material. We also check and brace the bottom rails to prevent future bowing.

Houston’s humidity and frequent rain cause standard steel hinges, latches, and bolts to oxidize quickly, leading to squeaking, stiffness, or complete failure. Our solution involves removing the corroded hardware, abrading the surrounding metal to bare steel, applying a rust-inhibitive primer, and installing marine-grade stainless steel or galvanized replacements. We follow up with a professional finish that matches your gate’s color.

We start by assessing the gate’s weight and the wind exposure. For heavier iron gates, we add diagonal bracing (a cross-beam) inside the frame to redistribute stress. We also install a heavy-duty, ball-bearing hinge system rated for high-wind loads. On the post side, we may recommend a concrete collar to anchor the post deeper into the ground, preventing lean or loosening over time.