Kinser Painting: Experienced Fence Installation Serving Bloomington, IN 47401

Bloomington’s climate is tough on fences. High humidity in summer and repeated freeze-thaw cycles in winter cause moisture to get trapped in the wood. If the original stain or paint wasn't applied correctly, or if it's been a few years without maintenance, the finish will crack, peel, and fade. Sun exposure also breaks down the color. At Kinser Painting, we often see this on older fences near the B-Line Trail or around Bryan Park. Our solution is to first strip the old finish with a pressure washer and paint remover, then apply a high-quality exterior stain that resists UV rays and moisture, extending your fence’s life.

Those green streaks are likely algae or mildew, which thrive in Bloomington’s humid, shaded areas—common on fences backing up to wooded lots or near campus. While it's mostly a cosmetic issue, if left unchecked, moisture can seep into cracks and accelerate rot. Our crew will power wash the fence to remove all organic growth. After it dries, we inspect for soft spots or rot. If the wood is still sound, we apply a mold-resistant stain or sealant. If we find damage—common on older fences near the Cascades Park area—we can repair sections before staining, saving you from a full replacement.

A good test is to run your hand over the surface. If the old stain flakes off easily, or if you see large patches of bare wood, you likely need full paint or stain removal. In Bloomington, fences that face south or west (like those along the railroad tracks near the B-Line) get harsh sun, causing the finish to fail faster. We’ll start with a pressure wash, then use a chemical stripper and scrape as needed. If the wood is gray but solid, we can often apply a new solid stain without full removal. Kinser Painting will do a free inspection, tell you honestly what’s needed, and give you a durable finish that holds up to Monroe County weather.