Lucky A’s Fabrication and Welding: Experienced Fence Builders Serving Dodge City, KS 67801

High winds, especially during spring storms, can loosen concrete footings or weaken metal fence posts over time. The cause is often shallow setting or thin-gauge metal that can’t handle lateral pressure. At Lucky A’s, we fix this by removing the loose post, digging a deeper hole (at least 18 to 24 inches), and setting a heavy-gauge steel post in a concrete collar. We also weld custom brackets to tie the post to the top rail, giving your fence extra wind resistance. This solution keeps gates and panels straight even during a typical Dodge City gust.

The first sign is usually a sagging gate that drags on the ground or doesn’t latch properly. You might also see a slight bow in the top rail or hear a rattling sound when the wind blows. Those are signs that the fence frame is losing tension or that a weld is cracking. If you catch it early, we can re-weld the joint and add a gusset plate at the corner to reinforce it. If ignored, the whole section can collapse in a strong wind. We always recommend walking your fence line after a big storm to check for loose bolts or bent rails.

Yes, we custom-build drive gates and field gates from scratch right here in Dodge City. We measure your opening, take into account the ground slope and wind exposure, then fabricate a gate from 2-inch square tubing or schedule 40 pipe. For extra strength, we add diagonal bracing and a heavy-duty hinge system. We can also weld on a chain-link frame if you prefer that look. No matter the size, we deliver and install it on-site, and we’ll adjust the springs or latch for smooth operation. We’ve made gates as wide as 16 feet for local ranchers near the Arkansas River.