Fence & Gate Installation, Repair & Weatherproofing in Fountain Hills, AZ | PME

Yes, ground shifting is a common cause in Fountain Hills due to seasonal moisture changes and soil composition. When the ground moves, the gate posts can tilt, throwing the gate out of alignment with the latch. A clear sign is the gate dragging on the ground, or a gap at the top or bottom when closed. PME can fix misaligned gates by resetting the posts, adjusting hinges, or replacing hardware. We’ll also check for any signs of termite damage or rot that can contribute to the problem.

Fading is very common in Fountain Hills because of the intense, direct sunlight. The UV rays break down paint and stain pigments over time, and the heat accelerates that process. A sign that it’s more than normal wear is when the wood starts looking gray and dry, or the paint is peeling and chalking. PME can repaint or restain your fence using products designed for high-sun areas, and we’ll apply a weatherproofing treatment to slow future fading. We can also recommend a color that holds up better under local conditions.

Often the issue is an electrical or motor problem, but in Fountain Hills, ground shifting can also cause the gate to bind or hit an obstruction, which trips the safety sensors. A sign of this is the gate starting to open and then reversing, or not moving at all. PME will inspect the track, hinges, and alignment first. If the problem is mechanical misalignment, we’ll adjust the gate first. If the opener itself is faulty, we can repair or replace motors, sensors, and control boards. We always check the power source and safety features too.