Metal Fabrication & Fencing | Sharp's Metal Installation | Millsap, TX

The combination of high humidity, summer heat, and occasional heavy rain in Millsap accelerates oxidation of standard steel hardware. Sharp's Metal Installation uses hot-dip galvanized or marine-grade stainless steel fasteners and hinges, which resist rust far longer than untreated materials. For existing rust, we can replace affected hardware and apply a protective sealant to slow future corrosion.

Discoloration on metal fences in Millsap is usually UV degradation of the paint or powder coating, not structural failure. However, if the coating has worn thin, moisture can reach the base metal and cause rust. Sharp's can sandblast or chemically strip the old finish, then apply a new industrial-grade coating matched to your fence. We also recommend periodic touch-ups after big storms to keep the barrier intact.

A sagging, rusty gate often means the hinges or frame have corroded, throwing the alignment off. Sharp's will first assess the damage—sometimes just replacing the hinge pins or brackets is enough. If the frame is compromised, we fabricate a custom replacement section from galvanized steel or aluminum, then weld it in place. We also check your gate posts and can reinforce them if needed to prevent future sagging.