Expert Fence Builders in Fort Worth, TX 76110 - Vaquero Fence and Weld

Sagging gates are usually caused by worn hinge bolts, loose frame welds, or a heavy gate pulling on a post that has shifted in the soil. A clear sign is the gate scraping the concrete or not latching properly. Vaquero Fence and Weld can reinforce the frame with new welds, replace the hinges with heavier-duty models, or fabricate a new gate panel that fits the existing opening. If the post has moved, we can reset and brace it so the gate stays aligned.

It depends on the extent of the damage. Small dents in steel panels can often be left alone or lightly hammered out if they affect the gate's operation. However, if hail has cracked welds, bent framework, or caused the gate to bind, repairing the affected section is usually more practical than replacing the entire fence. Vaquero Fence and Weld can cut out damaged sections, weld in new material, and match the finish so repairs look seamless.

Clay soil expands and contracts with moisture, which can shift fence posts over time. To prevent alignment issues, Vaquero Fence and Weld sets posts in concrete that extends below the frost line and uses heavy-duty gate hinges and a diagonal brace on the gate frame. Periodically checking that the gate swings freely and tightening hardware before problems start also helps. If a post does settle, we can shim the hinges or adjust the post with a hydraulic driver to realign the gate.