Zane and Jane's Custom Gates - Manor's Local Commercial Fencing
21400 Union Lee Church Rd, Manor, TX 78653
Service Capabilities
- Metal fabrication
- Fence and gate repair
- Fence repair
- Fence weatherproofing
- Manual gate installation
Local Business Description
Zane and Jane's Custom Gates, based in Manor, TX, specializes in metal fabrication for gates, fences, and outdoor structures. We serve residential properties across Central Texas, focusing on both aesthetics and durability. Our work includes installing wood privacy fences, handrails, garden gates, and automatic gate openers. Every project is designed to meet structural standards while enhancing property security and curb appeal. We also offer painting, staining, weatherproofing, and repair services for fences and gates. Whether it’s a manual to automatic door conversion, garage door installation or opener replacement, our goal is to provide long-lasting, functional solutions. Located near the heart of Manor, just off US-290 and close to Shadowglen and the Manor Lake area, we’re familiar with the local climate and common issues. For instance, vegetation growth—like overgrown shrubs and vines—can press against fences, causing warping or rot over time. We address this by recommending proper clearance during installation and using pressure-treated wood or metal posts. Rusting metal hardware is another frequent problem here due to humidity. We use galvanized or stainless steel fasteners and apply protective coatings to extend the life of your gate and fence hardware.
Q&A
How do you prevent vegetation from damaging my fence in Manor?
We recommend keeping shrubs and vines trimmed back at least 6 inches from the fence line. During installation, we set posts with proper clearance and use pressure-treated lumber or metal posts to resist moisture. For wood fences, we also apply weatherproofing sealants to prevent rot from trapped moisture near plants.
What’s involved in converting a manual gate to automatic?
We install a compatible gate opener (sliding or swing), run underground wiring for power, and set up safety sensors. We also check the gate’s balance and reinforce hinges if needed. The process typically takes one to two days, and we test the system thoroughly before leaving.
Can you repair a rusty metal gate or just replace it?
In most cases, we can repair it. We sand down the rust, apply a rust-inhibiting primer, and repaint or powder coat the area. If the damage is extensive (e.g., holes or weakened structure), we can fabricate a replacement section to match the original design. We use galvanized or stainless hardware to prevent future rust.
Business Location & Hours
| Mon: | 6:00 AM - 6:00 PM |
| Tue: | 6:00 AM - 6:00 PM |
| Wed: | 6:00 AM - 6:00 PM |
| Thu: | 6:00 AM - 6:00 PM |
| Fri: | 6:00 AM - 6:00 PM |
| Sat: | Closed |
| Sun: | Closed |
























