Top Fencing Companies in Alabaster, AL, 35007 | Compare & Call
There are 99 fencing companies server in Alabaster AL
Morgan Deck and Fence serves Verbena, AL, and the surrounding areas with expert deck and fence services. Located just off Highway 143, near the historic Verbena Community Center and the bustling downt...
76 Fence was founded in 2020 by Patrick Brouillette, a digital marketing executive who saw a gap in Birmingham’s fencing market: quality installations were hard to find, and the process was often frus...
V&Y Construction, based in Birmingham, AL, is a family-owned general contracting firm specializing in decks, railings, fences, and gates. The owner discovered his passion for construction and remodeli...
Campbell Fencing serves Vincent, AL, and the surrounding areas with professional fence and gate services. Local homeowners often face issues like storm-damaged panels and fence post erosion from poor ...
Smith Land Management provides professional tree services, landscaping, and fence and gate installation to homeowners in Wilsonville, AL. The company addresses common local fencing issues like termite...
Jose’s Green Land is a locally owned and operated outdoor service company based in Alabaster, AL. Serving homeowners near the Alabaster City Hall and the neighborhoods surrounding Thompson High School...
Campbells Fencing serves homeowners in Childersburg, AL, and the surrounding area. We specialize in fence and gate installation, repair, and painting, as well as deck construction, design, and repair....
Smith Lawn Care, based in Thorsby, AL, provides expert fence and gate services alongside comprehensive lawn care. Located just off Highway 31 near the Thorsby Town Park, the team specializes in tackli...
Nix Excavation And Welding
Nix Excavation And Welding, LLC, based in Brookwood, AL, is a locally owned and operated company founded by Jeffrey 'Scott' Nix in 2024. With over 15 years of certified welding experience and an emplo...
Dunbar’s Fencing & Construction
Dunbar’s Fencing & Construction serves Blountsville, AL, and the surrounding areas with a full range of painting, fencing, and general contracting services. For over a decade, the team has handled eve...
Estimated Fencing Costs in Alabaster, AL
Common Questions
Am I legally required to notify my neighbor before replacing a shared fence?
Yes. Alabama Code Section 35-3-1, the 'Good Neighbor Fence Law,' requires written notice to adjoining landowners before altering a shared boundary (partition fence). In Alabaster, this 2026 legal step is mandatory to avoid disputes and potential cost-sharing claims.
What are the height and setback rules for a fence on my property line?
Alabaster zoning limits fences to 4 feet in front yards and 8 feet in rear yards, with a 0-foot setback allowing construction on the property line. For corner lots, maintain a clear 'sight triangle' at intersections; this is critical for visibility near I-65 access roads.
Do smart gates meet pool safety and liability standards?
Yes. Integrated IoT latches with auto-locking features and remote monitoring can comply with IBC/IRC Appendix AG pool barrier requirements. This combination addresses the moderate smart-gate trend while meeting modern liability standards for Alabama homeowners with pools.
Why do fence posts in Silver Creek need footings below 12 inches?
Alabaster’s 12-inch frost line depth requires footings to resist frost heave. Posts set above this depth will lift and fail within two winters. The 2021 IRC, adopted locally, mandates this for structural stability against ground freeze-thaw cycles.
How soon can a consultation be scheduled for Silver Creek?
A structural consultation is typically scheduled within 48 hours. The route from Veterans Park via I-65 to Silver Creek allows for a 15-25 minute response window, depending on traffic. Site assessments focus on wind exposure, soil conditions, and zoning compliance.
How does the 115 MPH V-ult wind speed rating change fence design?
The 115 MPH V-ult wind speed is the ultimate design wind speed for Alabaster per ASCE 7-22. This rating dictates closer post spacing (often 6-foot centers), deeper concrete footings, and reinforced bracket connections to survive peak storm season gusts, especially in exposed areas near I-65.
How does Alabaster's 'Very Heavy' termite risk and moderate soil corrosivity affect material choice?
Pressure-treated Southern Yellow Pine with ground-contact ratings (UC4B) resists termites. For metal posts and fasteners, use hot-dip galvanized or stainless steel to prevent rust streaks from moderate soil corrosion. Material incompatibility leads to premature failure.
What is the utility locate process before digging fence post holes?
Call Alabama 811 at least three full business days before excavation. They mark public utility lines. Hitting an unmarked line in Silver Creek creates major liability for repair costs and service disruption. The contractor typically manages this call and coordinates with the Alabaster permit office.
