Top Fencing Companies in Bessemer, AL, 35020 | Compare & Call

There are 210 fencing companies server in Bessemer AL

Blackberry Construction

Blackberry Construction

Trussville AL 35173
Decks & Railing, Patio Coverings, Fences & Gates

Blackberry Construction is a Trussville-based contractor with over four decades of experience serving the Birmingham metro area. Founded on a straightforward approach to building, the company focuses ...

KC Services

KC Services

5885 Snowville Brent Rd, Dora AL 35062
General Contractors, Fences & Gates, Siding

KC Services is a residential general construction company based in Dora, Alabama, offering a wide range of home improvement solutions. We specialize in bathroom remodeling, full home remodeling, and c...

Crown Landscape Service

Crown Landscape Service

Birmingham AL 35242
Landscaping, Pressure Washers, Fences & Gates

Crown Landscape Service in Birmingham, AL, specializes in landscaping, pressure washing, and fence and gate services. Local homeowners often face fence sections blown down by high winds or discolorati...

Super Handyman Fencing And Construction provides expert fence and gate services to Helena, AL, focusing on the common local problem of gate locking mechanism failures and broken gate latches. Whether ...

Campbells Fencing

Campbells Fencing

Childersburg AL 35044
Fences & Gates, Decks & Railing, Painters

Campbells Fencing serves homeowners in Childersburg, AL, and the surrounding area. We specialize in fence and gate installation, repair, and painting, as well as deck construction, design, and repair....

Smith Lawn Care

Smith Lawn Care

Thorsby AL 35171
Fences & Gates, Lawn Services

Smith Lawn Care, based in Thorsby, AL, provides expert fence and gate services alongside comprehensive lawn care. Located just off Highway 31 near the Thorsby Town Park, the team specializes in tackli...

Nix Excavation And Welding

Nix Excavation And Welding

16699 Hatter Dr, Brookwood AL 35444
Excavation Services, Demolition Services, Fences & Gates

Nix Excavation And Welding, LLC, based in Brookwood, AL, is a locally owned and operated company founded by Jeffrey 'Scott' Nix in 2024. With over 15 years of certified welding experience and an emplo...

Dunbar’s Fencing & Construction

Dunbar’s Fencing & Construction

★☆☆☆☆ 1.0 / 5 (1)
25 Hendrix St, Blountsville AL 35031
Painters, General Contractors, Fences & Gates

Dunbar’s Fencing & Construction serves Blountsville, AL, and the surrounding areas with a full range of painting, fencing, and general contracting services. For over a decade, the team has handled eve...

P&G Construction

P&G Construction

Albertville AL 35950
General Contractors, Fences & Gates, Masonry/Concrete

P&G Construction proudly serves Albertville, AL, and the surrounding areas including Huntsville, Birmingham, and Gadsden. As experienced general contractors, we specialize in a comprehensive range of ...

Jacobs Contracting

Jacobs Contracting

Pelham AL 35124
Decks & Railing, Fences & Gates, Tree Services

Jacobs Contracting, based in Pelham, AL, provides expert deck construction, repair, and replacement, along with fence, gate, and tree care services. The humid climate around landmarks like Oak Mountai...



Estimated Fencing Costs in Bessemer, AL

Emergency Fence/Gate RepairStorm / Security Response
$264 - $359
Wood Privacy Fence (Per LF)Estimated Range
$24 - $39
Vinyl / PVC Fencing (Per LF)Estimated Range
$34 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$39 - $59
Standard Driveway Gate InstallEstimated Range
$954 - $1,279

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Bessemer. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

FAQs

What are the height and placement rules for a fence on my corner lot?

Bessemer zoning limits fences to 4 feet in the front yard and 8 feet in the rear. The 0-foot setback allows installation directly on the property line. For corner lots, a critical 'sight triangle' must remain clear for driver visibility. Proximity to I-20/59 means any fence obstructing this triangle creates a significant traffic hazard and violates city code.

What is the typical timeline for a consultation and project start?

We dispatch from the Bessemer City Hall area. Travel to most Downtown sites via I-20/59 takes 15-25 minutes. After the initial site consultation, we finalize engineered plans and pull permits. The start date depends on material lead times and the Alabama 811 marking schedule. We provide a firm schedule after the site assessment and utility locate are complete.

How does the 115 MPH wind rating affect my fence design?

The 115 MPH V-ult wind speed is an ultimate design load, not a common gust. This engineering standard dictates post spacing, concrete footing size, and bracket strength. A fence in an exposed area must use closer post spacing and reinforced connections to resist the peak storm season forces. Standard residential designs often fail under this calculated load.

Why do fence posts in Downtown Bessemer fail without proper footings?

The 12-inch frost line depth and 115 MPH V-ult wind speed create a destructive cycle of frost heave and lateral force. Posts not embedded below the frost line with concrete footings will lift during freeze-thaw cycles. This compromises the entire structure's ability to meet ASCE 7-22 wind load standards. Proper footings anchor the fence against both uplift and overturning.

What fencing materials withstand Bessemer's soil and termite conditions?

Downtown Bessemer has moderate soil corrosivity and a very heavy termite risk. Pressure-treated wood must be rated for ground contact and include termiticide. Metal posts require hot-dip galvanized steel. Use stainless steel or triple-coated fasteners to prevent rust streaks from corrosive soil. In the Historic District, material choices are further restricted by preservation guidelines.

How do smart gates align with Alabama pool safety and liability standards?

Integrated IoT smart gates with automated self-closing and self-latching mechanisms directly satisfy IBC/IRC Appendix G pool barrier requirements. This tech trend provides a verifiable audit trail of gate status, reducing homeowner liability. A properly integrated system meets both the 2026 expectation for smart property access and the non-negotiable state safety code.

What is required before digging fence post holes in my neighborhood?

Call Alabama 811 at least three full business days before excavation. Hitting a buried utility line in Downtown Bessemer creates major liability, service disruptions, and fines. This locate ticket is a prerequisite for the city permit office. We manage the permit application process, ensuring the plans meet all structural and zoning requirements before work begins.

What are my legal obligations when replacing a fence on the property line?

Alabama Code Section 35-3-1, the 'Good Neighbor Law,' requires written notice to adjacent property owners before altering a shared boundary, or partition fence. Bessemer allows a 0-foot setback, meaning you can build on the line, but this statute mandates neighbor notification. Failure to provide notice can result in disputes over cost-sharing and liability.



Scroll to Top
CALL US NOW