Top Fencing Companies in Double Springs, AL, 35553 | Compare & Call

There are 32 fencing companies server in Double Springs AL

American Barrier and Fence

American Barrier and Fence

100 13th St NE, Cullman AL 35055
Fences & Gates

American Barrier & Fence in Cullman, AL, has been installing fences across North Alabama since 2008. What started as a family trade — with over a hundred years of combined experience passed down from ...

Southern Home Repair and Fencing

Southern Home Repair and Fencing

2842 Co Rd 24, Double Springs AL 35553
Fences & Gates, Decks & Railing

Southern Home Repair and Fencing serves Double Springs, AL, and the surrounding areas, specializing in deck construction, repair, and replacement as well as fence and gate services. Many local homes f...

« Previous PagePage 4 of 4Next »


Estimated Fencing Costs in Double Springs, AL

Emergency Fence/Gate RepairStorm / Security Response
$264 - $359
Wood Privacy Fence (Per LF)Estimated Range
$24 - $39
Vinyl / PVC Fencing (Per LF)Estimated Range
$34 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$39 - $59
Standard Driveway Gate InstallEstimated Range
$954 - $1,279

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Double Springs. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Question Answers

How soon can a consultation be scheduled?

A site consultation is typically scheduled within 48 hours. Our route from the Winston County Courthouse uses US Highway 278, ensuring a 15-20 minute response time to most properties in the Downtown Double Springs area for an initial assessment.

What are the neighbor notification rules for a fence in Alabama?

Alabama Code Section 35-3-1, the 'Good Neighbor' fence law, requires written notice to adjoining owners before replacing a shared boundary fence. As of 2026, this notice must be sent via certified mail, providing a 30-day response period for cost-sharing proposals in Double Springs.

How deep should fence posts be set in Double Springs?

Footings must be set below the 12-inch frost line. The IRC requires this to prevent frost heave, which lifts posts out of alignment. In Downtown Double Springs, posts set in shallow holes fail within two winters due to ground freeze-thaw cycles.

Is a standard fence strong enough for Winston County winds?

No. The 115 MPH V-ult wind load rating requires engineered resistance. Standard 8-foot panel spacing often fails. For survival in peak storm season, design must use 6-foot post centers with through-bolt brackets and concrete footings sized to ASCE 7-22 standards for wind exposure.

Do smart gates meet pool safety codes?

Yes. An integrated IoT gate latch can meet IRC Appendix AG and ISPSC standards if it self-latches and self-closes from any position. While smart gate adoption is low in the area, this integration provides a dual record of access for liability protection, which Alabama courts now recognize.

What are the height and placement rules for a fence in Double Springs?

Zoning limits are 4 feet in the front yard and 6 feet in the rear yard, with a 0-foot setback allowing installation on the property line. For corner lots near US Highway 278, a clear 'sight triangle' must be maintained for driver visibility, prohibiting opaque fencing within 25 feet of the intersection.

What is required before digging fence post holes?

You must contact Alabama 811 for a utility locate at least three working days before excavation. Hitting a buried line in Downtown Double Springs incurs major repair costs and liability. We manage the permit paperwork with the county office, ensuring the plot plan meets all setback rules.

What fencing material holds up best against termites and soil corrosion?

Given the Very Heavy termite risk and Moderate soil corrosivity, use non-cellulosic materials. Pressure-treated wood requires ground-contact rated preservatives. For metal posts, hot-dip galvanized steel with polymer-coated fasteners prevents rust streaks from forming on the finish.



Scroll to Top
CALL US NOW