Top Fencing Companies in Elmore, AL, 36025 | Compare & Call
There are 54 fencing companies server in Elmore AL
Montgomery Fence Company in Montgomery, AL, has been serving the community since 2004. We specialize in a wide range of fencing solutions, including chain link, cedar wood, vinyl, aluminum, and Simtek...
Carter Renovation's, based in Montgomery, AL, is a general contracting company specializing in fences, gates, decks, and railing. They handle a full range of projects, from bathroom and kitchen remode...
Turner Fence, licensed and based in Opelika since 2003, provides residential and commercial fence and gate solutions across east Alabama and west Georgia, including Dadeville, Alexander City, and the ...
DogWatch of Mid-Alabama, based in Montgomery, has been serving pet owners since 1995. Owner Paul, a Montgomery native now living in Prattville with his wife Kelly and their children, runs the independ...
Premier fence and deck serves Deatsville, AL, providing expert deck construction, repair, and replacement. Located near the Holtville community and along Highway 143, we understand the local challenge...
Woodchuck Fencing & Decks serves Elmore, AL, specializing in deck construction, repair, and replacement. Located near the Elmore County Courthouse and just a short drive from the Coosa River, the busi...
D And E Services is a family-owned general contractor based in Montgomery, AL, established in 2012 with over 40 years of combined experience in general contracting and lawn services. We specialize in ...
Pro-Time Cleaning Services & Repairs offers a comprehensive range of home maintenance solutions to Montgomery, AL residents. From plumbing fixtures like bathtub and water heater installations to fence...
J3 Southern Construction serves Prattville, AL, offering expert deck building, repair, and replacement services. Recognizing a common local issue, the team addresses the mold, mildew, and general dete...
Extreme Fencing, serving Elmore, AL, is your local expert for fences and gates. We understand that Elmore homeowners face specific challenges like fence post erosion from poor drainage and broken gate...
Estimated Fencing Costs in Elmore, AL
Q&A
Why do fence posts in Elmore City Center need footings below the 12-inch frost line?
The Alabama IRC requires footings below the frost line to prevent frost heave. In the Elmore City Center neighborhood, posts set in shallow concrete will lift during winter freeze-thaw cycles, causing permanent structural failure. We engineer footings to IRC R403 for a 12-inch frost depth.
What are the legal requirements for replacing a boundary fence with my neighbor in Elmore?
Alabama Code Section 35-3-1, the 'Good Neighbor Fence Law,' requires written notice to adjoining landowners before replacing a shared 'partition fence.' Since 2026, Elmore ordinances also require this notification be filed with the municipal permit office to avoid legal disputes over boundary lines.
How is a fence engineered for the 115 MPH V-ult wind speed rating in Elmore?
The V-ult wind speed of 115 MPH is the ultimate design wind speed per ASCE 7-22 standards. Engineering for this load dictates post spacing, concrete footing size, and the use of through-bolt brackets instead of nails. This ensures the structure can survive peak storm season gusts without panel failure or overturning.
What are the height and setback rules for a fence on my property in Elmore?
Elmore zoning limits fences to 4 feet tall in front yards and 8 feet in rear yards, with a 0-foot setback allowing installation on the property line. For corner lots near AL-14, a clear 'sight triangle' must be maintained for traffic visibility. We survey and mark these zones before installation to ensure code compliance.
How do modern security gates meet Alabama pool safety and liability standards?
The International Swimming Pool and Spa Code (ISPSC) requires self-closing, self-latching gates for pools. Modern smart-gate IoT systems integrate these mandated latches with remote access logs. This combination meets the 2026 standard of care for liability by providing both a physical barrier and digital compliance records.
How does Elmore's 'Very Heavy' termite risk and moderate soil corrosivity affect material choice?
Pressure-treated Southern Yellow Pine is the standard for wood posts, but it requires ground-contact treatment and regular termite inspections. For metal, we specify hot-dip galvanized steel posts and aluminum fasteners to prevent rust streaks from moderate soil corrosion. Composite materials offer an alternative but require specific UV-stable formulations for this climate.
How soon can a consultation be scheduled, and what is the typical response time?
A structural consultation can be scheduled within 48 hours. Our standard dispatch route from the Elmore Town Hall via AL-14 provides a 15-20 minute response window to most addresses in the primary service area, allowing for a same-day site assessment and preliminary wind load calculation.
What is the utility locate process, and why is it critical in Elmore City Center?
Alabama 811 must be contacted at least three full business days before any digging. In the Elmore City Center neighborhood, hitting a buried gas, fiber, or power line is a major financial and safety liability. We manage the 811 ticket and coordinate the resulting markings with the city permit office to clear the site for excavation.
