Top Fencing Companies in Gulf Shores, AL, 36542 | Compare & Call
There are 107 fencing companies server in Gulf Shores AL
Gulf Coast Railing, based in Fairhope, AL, provides custom railing, screen, and pergola solutions for homes and businesses along Baldwin County's coast. Specializing in deck construction, repair, and ...
Dearmon Fence Company has been serving Saraland, AL, and surrounding areas including Satsuma since 1996. We specialize in fence and gate installation, repair, painting, staining, and weatherproofing f...
Deep South Fence and Deck has been serving Mobile, AL homeowners for years, offering expert deck construction, repair, and replacement. Living near the Gulf Coast means battling humidity and salt air,...
RJ Painting, based in Mobile, AL, specializes in painting, fence and gate installation, and pressure washing services. We help homeowners in the Port City tackle common local issues like storm-damaged...
Consolidated Fence Co., located in Daphne, AL, has been serving Baldwin County for nearly three decades. Originally founded as Carrington Fence Company in 1990, the business was purchased by Sandy Wis...
Harvey Home Solutions LLC, based in Mobile, AL, serves Saraland and the surrounding area with a full range of construction and renovation services. We specialize in roofing, fencing, and general contr...
First Class Fence is a family owned and operated fence contractor serving Foley, AL, and a hundred-mile radius. With over 20 years of experience, we are fully licensed and insured. We offer a wide ran...
Gulf Stain & Seal is a family-run business based in Daphne, AL, owned by Lindsey and Hayden. As a small team, we focus on restoring and protecting outdoor wood structures across Baldwin County. Our se...
PM&R Outdoor Services
PM&R Outdoor Services, based in Robertsdale, AL, has been serving Baldwin County since 2013. We specialize in fence and gate installation, repair, and weatherproofing, along with outdoor lighting, hol...
Solid Ground Solutions, based in Daphne, AL, offers expert fences & gates, demolition, and excavation services to local homeowners. We understand the challenges of the Gulf Coast humidity, which often...
Estimated Fencing Costs in Gulf Shores, AL
Frequently Asked Questions
What are the height and setback rules for a fence in Gulf Shores City Center?
Zoning limits are 4 feet tall in the front yard and 8 feet in the rear. The setback regulation is a 0-foot (on-property-line) setback. For corner lots near AL-59, you must maintain a clear 'sight triangle' at intersections—typically a 10-foot area from the property corner with no visual obstructions over 3 feet high.
Is a standard fence strong enough for 150 mph hurricane winds?
No. A 150 MPH V-ult wind rating dictates the structural design. This ultimate wind speed, per ASCE 7-22 standards, requires reduced post spacing (often 6 feet on-center), deeper concrete footings, and wind-rated post brackets. A non-engineered fence will fail during peak storm season gusts coming from the Gulf.
Will my fence posts heave and fail in Gulf Shores winters?
Yes, if footings are shallow. The official frost line depth for Gulf Shores City Center is 6 inches of frost. IRC Section R403.1.4 requires concrete footings to extend below this line to prevent frost heave. Posts set in soil above this depth will lift during a freeze-thaw cycle, destabilizing the entire perimeter.
What fence materials hold up best against Gulf Shores termites and soil?
Material compatibility is mandatory. With a Very Heavy termite risk and a High soil corrosivity index, pressure-treated pine or composite materials are superior to untreated wood. Use hot-dip galvanized or stainless steel fasteners. Standard coated screws will rust, causing unsightly and weakening streaks on the finish.
How soon can a crew start a fencing project in Gulf Shores City Center?
Consultations are scheduled within 1-2 business days. Our standard dispatch route from Gulf State Park uses AL-59 for direct access, ensuring a 15-25 minute response time to most City Center addresses. Project start dates follow material procurement and the Alabama 811 clearance period.
Can I have a smart, automated gate for my pool area?
Yes, but integration is critical. A smart gate with IoT-controlled latches must comply with ISPSC 2021 and ASTM F2286 standards for pool barriers. The system must self-close and self-latch automatically. In 2026, combining access control with these safety mechanisms is the standard for managing modern liability in Alabama.
What is the first step before any digging for a fence?
You must call Alabama 811 for a utility locate. Hitting a gas, water, or fiber line in Gulf Shores City Center is a major financial and safety liability. The service marks public lines; private irrigation or lighting requires a private locate. We manage the subsequent permit office paperwork for the City of Gulf Shores based on these clearances.
Am I legally required to tell my neighbor I'm replacing our shared fence?
Yes. Alabama Code Section 35-3-1, the 'Good Neighbor Fence Law,' mandates written notice to adjoining landowners for any partition fence work. Since 2026, Gulf Shores enforcement requires this notification 30 days prior to starting construction or removal of a shared boundary line fence.
