Top Fencing Companies in Smoke Rise, AL, 35180 | Compare & Call

There are 68 fencing companies server in Smoke Rise AL

Blackberry Construction

Blackberry Construction

Trussville AL 35173
Decks & Railing, Patio Coverings, Fences & Gates

Blackberry Construction is a Trussville-based contractor with over four decades of experience serving the Birmingham metro area. Founded on a straightforward approach to building, the company focuses ...

Campbells Fencing

Campbells Fencing

Childersburg AL 35044
Fences & Gates, Decks & Railing, Painters

Campbells Fencing serves homeowners in Childersburg, AL, and the surrounding area. We specialize in fence and gate installation, repair, and painting, as well as deck construction, design, and repair....

Nix Excavation And Welding

Nix Excavation And Welding

16699 Hatter Dr, Brookwood AL 35444
Excavation Services, Demolition Services, Fences & Gates

Nix Excavation And Welding, LLC, based in Brookwood, AL, is a locally owned and operated company founded by Jeffrey 'Scott' Nix in 2024. With over 15 years of certified welding experience and an emplo...

Dunbar’s Fencing & Construction

Dunbar’s Fencing & Construction

★☆☆☆☆ 1.0 / 5 (1)
25 Hendrix St, Blountsville AL 35031
Painters, General Contractors, Fences & Gates

Dunbar’s Fencing & Construction serves Blountsville, AL, and the surrounding areas with a full range of painting, fencing, and general contracting services. For over a decade, the team has handled eve...

P&G Construction

P&G Construction

Albertville AL 35950
General Contractors, Fences & Gates, Masonry/Concrete

P&G Construction proudly serves Albertville, AL, and the surrounding areas including Huntsville, Birmingham, and Gadsden. As experienced general contractors, we specialize in a comprehensive range of ...

Southern Pet Solutions

Southern Pet Solutions

219 White Oak Lp, Good Hope AL 35057
Fences & Gates

Southern Pet Solutions, based in Good Hope, AL, provides professional underground dog fence installation and repair services. As an owner-operated local business, we focus on clean installations, hone...

J And J Fence

J And J Fence

Warrior AL 35180
Fences & Gates

J And J Fence serves homeowners and businesses in Warrior, AL, offering reliable fence and gate solutions. The humid Alabama climate often leads to wood fence rot, while metal components can rust over...

Apple Fence Co

Apple Fence Co

Warrior AL 35180
Fences & Gates

Apple Fence Co serves the Warrior, AL community with expert fence and gate solutions. Located near the historic Warrior River and downtown, we address common local problems like damaged privacy fence ...

True Vine Fencing

True Vine Fencing

Boaz AL 35956
Fences & Gates

True Vine Fencing LLC brings over 20 years of hands-on experience to fence and gate projects in Boaz, Alabama. Our team focuses on practical, reliable work—whether installing a new wooden privacy fenc...

A&N Fence and Construction

A&N Fence and Construction

Cullman AL 35058
Fences & Gates

A&N Fence and Construction is a family-owned business based in Cullman, AL, founded by a local who learned the trade from his father's 20-year-plus company. With over 15 years of hands-on experience i...



Estimated Fencing Costs in Smoke Rise, AL

Emergency Fence/Gate RepairStorm / Security Response
$264 - $359
Wood Privacy Fence (Per LF)Estimated Range
$24 - $39
Vinyl / PVC Fencing (Per LF)Estimated Range
$34 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$39 - $59
Standard Driveway Gate InstallEstimated Range
$954 - $1,279

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Smoke Rise. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Question Answers

Why do fence posts in Smoke Rise need footings below the 12-inch frost line?

Frost heave in Alabama soil can lift shallow posts. IRC R403.1.4 requires footings below the 12-inch line to prevent structural failure. Posts set in concrete above this depth will shift during freeze-thaw cycles, damaging the entire fence line.

How do you engineer a fence to survive 115 MPH wind loads in Smoke Rise?

The 115 MPH V-ult wind speed rating dictates structural design per ASCE 7-22. This requires reduced post spacing (often 6-foot centers), deeper concrete footings, and wind-rated brackets. Proper engineering manages the uplift and lateral loads from peak storm season gusts near the I-65 corridor.

How soon can a crew start a fencing project in Smoke Rise?

A consultation typically schedules within 48 hours. The route from the Garden City Road and I-65 Interchange via I-65 allows for a 35–45 minute response window to most Smoke Rise addresses. Project start dates depend on material lead times and the Alabama 811 marking completion.

What are the fence height and placement rules for my Smoke Rise property?

Smoke Rise zoning enforces a 4-foot front yard and 8-foot rear yard height limit. The 0-foot setback allows building directly on the property line. Corner lots near the I-65 interchange require a clear 'sight triangle'—no visual obstructions within 10 feet of the intersection for traffic safety.

What preparation is required before digging fence post holes in Smoke Rise?

Call Alabama 811 at least three working days before excavation. They mark public utility lines. Hitting an unmarked line, especially in a neighborhood with older infrastructure, creates major liability and repair costs. The contractor typically manages the Smoke Rise permit office paperwork, which includes the utility locate ticket.

What are my legal obligations to my neighbor when building a fence in Smoke Rise?

Under Alabama Code Section 35-3-1 (Boundary Fence Act), property owners share maintenance costs for partition fences. A 2026 legal requirement mandates written notification to adjoining landowners before replacing any shared boundary. This prevents disputes and establishes cost-sharing.

Which fencing materials hold up best against Smoke Rise's termite risk and soil?

With a Very Heavy termite risk, pressure-treated wood requires borate-based preservatives. For Moderate soil corrosivity, use hot-dip galvanized or stainless-steel fasteners. Vinyl or composite materials avoid organic decay but need proper drainage. Incompatible metals cause rust streaks on foundations.

How do modern gate systems meet safety codes for pools and properties?

Integrated IoT latches now combine with self-closing, self-latching hardware per IBC/IRC Appendix AG. This meets the 54-inch minimum height and latching requirement for pool barriers. Smart-gate systems provide audit trails and remote status checks, satisfying modern liability standards for Alabama homeowners.



Scroll to Top
CALL US NOW