Top Fencing Companies in Summerdale, AL, 36580 | Compare & Call

There are 84 fencing companies server in Summerdale AL

Alabama Fabworks

Alabama Fabworks

Semmes AL 36575
Fences & Gates, Metal Fabricators

Alabama Fabworks, owned by Brandon Carter, brings six years of metal fabrication and welding expertise to Semmes, AL. Based in the heart of Semmes near the Schillinger Road corridor and just minutes f...

Gulf Coast Railing

Gulf Coast Railing

Fairhope AL 36532
Fences & Gates, Patio Coverings, Decks & Railing

Gulf Coast Railing, based in Fairhope, AL, provides custom railing, screen, and pergola solutions for homes and businesses along Baldwin County's coast. Specializing in deck construction, repair, and ...

Dearmon Fence Company

Dearmon Fence Company

★★★☆☆ 3.0 / 5 (2)
Satsuma AL 36572
Fences & Gates

Dearmon Fence Company has been serving Saraland, AL, and surrounding areas including Satsuma since 1996. We specialize in fence and gate installation, repair, painting, staining, and weatherproofing f...

Deep South Fence and Deck

Deep South Fence and Deck

Mobile AL 36608
Fences & Gates, Decks & Railing

Deep South Fence and Deck has been serving Mobile, AL homeowners for years, offering expert deck construction, repair, and replacement. Living near the Gulf Coast means battling humidity and salt air,...

RJ Painting

RJ Painting

★★★☆☆ 3.0 / 5 (2)
Mobile AL 36695
Painters, Fences & Gates, Pressure Washers

RJ Painting, based in Mobile, AL, specializes in painting, fence and gate installation, and pressure washing services. We help homeowners in the Port City tackle common local issues like storm-damaged...

Consolidated Fence Co.

Consolidated Fence Co.

★★★☆☆ 3.0 / 5 (2)
25451 State Hwy 181, Daphne AL 36526
Fences & Gates

Consolidated Fence Co., located in Daphne, AL, has been serving Baldwin County for nearly three decades. Originally founded as Carrington Fence Company in 1990, the business was purchased by Sandy Wis...

Harvey Home Solutions

Harvey Home Solutions

Saraland AL 36571
Fences & Gates, General Contractors, Roofing

Harvey Home Solutions LLC, based in Mobile, AL, serves Saraland and the surrounding area with a full range of construction and renovation services. We specialize in roofing, fencing, and general contr...

First Class Fence

First Class Fence

1202 Primrose Ln, Foley AL 36535
Fences & Gates, Decks & Railing

First Class Fence is a family owned and operated fence contractor serving Foley, AL, and a hundred-mile radius. With over 20 years of experience, we are fully licensed and insured. We offer a wide ran...

Gulf Stain & Seal

Gulf Stain & Seal

Daphne AL 36526
Pressure Washers, Fences & Gates, Decks & Railing

Gulf Stain & Seal is a family-run business based in Daphne, AL, owned by Lindsey and Hayden. As a small team, we focus on restoring and protecting outdoor wood structures across Baldwin County. Our se...

PM&R Outdoor Services

PM&R Outdoor Services

Robertsdale AL 36567
Fences & Gates, Lighting Fixtures & Equipment, Holiday Decorating Services

PM&R Outdoor Services, based in Robertsdale, AL, has been serving Baldwin County since 2013. We specialize in fence and gate installation, repair, and weatherproofing, along with outdoor lighting, hol...



Estimated Fencing Costs in Summerdale, AL

Emergency Fence/Gate RepairStorm / Security Response
$264 - $359
Wood Privacy Fence (Per LF)Estimated Range
$24 - $39
Vinyl / PVC Fencing (Per LF)Estimated Range
$34 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$39 - $59
Standard Driveway Gate InstallEstimated Range
$954 - $1,279

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Summerdale. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Q&A

What are the legal steps for replacing a shared fence in Summerdale?

Alabama Code § 35-3-1, the 'Good Neighbor' law, governs shared boundaries. As of 2026, you must provide written notice to the adjoining property owner at least 30 days before starting work on a partition fence. This notice must describe the proposed fence and the estimated cost. Failure to provide this notice in Summerdale can result in legal disputes and work stoppages.

How is a fence engineered for 140 MPH winds in Alabama?

The V-ult wind speed of 140 MPH dictates the structural design. Per ASCE 7-22 standards, this rating requires reduced post spacing (often 6 feet on-center instead of 8 feet), deeper concrete footings, and reinforced bracket connections. The design must account for peak storm season gusts, ensuring the fence acts as a perforated wall that allows wind pressure to diffuse without creating a solid sail.

How soon can a site consultation be scheduled?

We typically schedule consultations within 3-5 business days. Our route from the Summerdale Municipal Complex uses AL-59 for primary access, providing a consistent 15-20 minute response time to most properties in the Summerdale Historic District. We confirm all appointments with a detailed scope of work and zoning review 24 hours in advance.

Do smart gates meet Alabama pool safety codes?

Yes, when integrated correctly. The 2021 International Swimming Pool and Spa Code (Appendix AG) requires pool barriers with self-closing, self-latching gates. Modern IoT smart gates can be engineered with these mechanical latches and sensors that confirm closure, creating an auditable security log. This integration meets both the state code and modern liability standards for homeowners seeking enhanced security.

What is the utility locate process before digging in Summerdale?

You must contact Alabama 811 at least three full business days before any excavation. They will notify all utility companies, who will mark their lines on your property. Hitting an unmarked line in the Summerdale Historic District, especially near the Municipal Complex, can cause major service disruptions and lead to significant financial liability. We manage all 811 tickets and coordinate the resulting permit office paperwork as part of our service.

What are the height and setback rules for a fence in Summerdale?

Zoning limits are 4 feet in front yards and 8 feet in rear yards. The setback regulation permits a 0-foot setback, meaning you can build directly on your property line. For corner lots, especially those near the traffic flow of AL-59, you must maintain a clear 'sight triangle' for visibility. This typically requires a lower, open-style fence within 20-30 feet of the intersection corner.

What fence materials work best with Summerdale's soil and termite risk?

Material compatibility is critical. The area has a Very Heavy termite risk and Moderate soil corrosivity. Pressure-treated pine must use ground-contact rated preservatives (UC4B or higher). For metal posts and hardware, hot-dip galvanized or stainless steel fasteners are mandatory to prevent rust streaks from corrosive soils. Vinyl or composite materials offer high resistance to both decay and insect damage.

Why do fence posts fail in the Summerdale Historic District?

Posts fail due to frost heave. The local frost line depth is 6 inches. Posts set above this line will lift during freeze-thaw cycles, causing structural failure. IRC Section R403.1.4 requires all footings to extend below this line for stability. We engineer all post footings to a minimum depth of 30 inches to provide a safety factor against heave.



Scroll to Top
CALL US NOW