Top Fencing Companies in Tallassee, AL, 36078 | Compare & Call
There are 39 fencing companies server in Tallassee AL
Guthrie Outdoor Solutions is a family owned and operated home services provider based in Millbrook, AL. We specialize in landscaping, irrigation, fence and gate installation, and tree care. Our servic...
ProEdge Carpentry, based in Montgomery, AL, specializes in carpentry, fencing, and siding services. Locals know that Montgomery's clay soil and heavy rains often cause fence post erosion and gate latc...
MR Lopez Painter, based in Montgomery, AL, specializes in a wide range of home repairs and improvements, including interior and exterior painting, drywall installation and repair, and fence and gate s...
Montgomery Fence Company in Montgomery, AL, has been serving the community since 2004. We specialize in a wide range of fencing solutions, including chain link, cedar wood, vinyl, aluminum, and Simtek...
Affordable Fencing Solutions, based in Phenix City, AL, specializes in residential and commercial fence and gate services, including installation, repair, staining, and weatherproofing. With over 20 y...
Turner Fence, licensed and based in Opelika since 2003, provides residential and commercial fence and gate solutions across east Alabama and west Georgia, including Dadeville, Alexander City, and the ...
DogWatch of Mid-Alabama, based in Montgomery, has been serving pet owners since 1995. Owner Paul, a Montgomery native now living in Prattville with his wife Kelly and their children, runs the independ...
Gryphon Door Co, based in Lanett, AL, provides door and fence solutions that enhance both security and curb appeal for local properties. Our team specializes in expert door installation, repair, and r...
A & E Fence, located in Shorter, AL, specializes in fences and gates, addressing common local issues like fence posts leaning after heavy rain and cracked pickets caused by Alabama's weather. Serving ...
Extreme Fencing, serving Elmore, AL, is your local expert for fences and gates. We understand that Elmore homeowners face specific challenges like fence post erosion from poor drainage and broken gate...
Estimated Fencing Costs in Tallassee, AL
Common Questions
How do you build a fence to withstand our high winds?
The design is governed by the 105 MPH V-ult wind speed rating. This engineering standard dictates post spacing, concrete footing size, and the required strength of post-to-rail brackets. Proper calculation per ASCE 7-22 ensures the structure survives peak storm season gusts.
Can I have a smart gate if I have a pool?
Yes, but integration is critical. The gate's IoT latch must automatically engage and meet the 2021 IBC/IRC Appendix AG pool barrier code. This dual compliance—remote access plus self-closing, self-latching hardware—is the modern standard for liability protection in Alabama.
How soon can a consultant visit my property?
A structural perimeter specialist can typically be dispatched within 48 hours. From Tallassee City Hall, the route via AL-14 allows for a 15 to 25-minute response to most addresses in the Downtown area for an initial site assessment.
What are the height and placement rules for a fence in Tallassee?
Zoning limits are 3 feet in front yards and 6 feet in rear yards. The city allows a 0-foot setback, meaning you can build on the property line. Corner lots near AL-14 require special attention to 'sight triangles'—low, open sections to maintain driver visibility.
Why do fence post footings need to be so deep in Tallassee?
Footings must extend below the local 12-inch frost line. Posts in Downtown Tallassee not set below this depth will lift from frost heave, breaking concrete and warping the fence. The International Residential Code (IRC) R403.1.4.1 mandates this for stability in our climate zone.
What is required before you dig the first post hole?
You must call Alabama 811 for a utility locate. Hitting a buried line in a dense neighborhood like Downtown Tallassee incurs major repair costs and liability. We manage the subsequent permit paperwork with the city office, ensuring the project is fully documented and legal.
What fence materials hold up best against Tallassee's pests and soil?
Material compatibility is essential. With very heavy termite risk, avoid wood-to-soil contact; use steel posts or concrete bases. For moderate soil corrosivity, specify hot-dip galvanized or stainless-steel fasteners to prevent unsightly rust streaks on your siding.
Am I legally required to talk to my neighbor before building a fence?
For a shared boundary, yes. Alabama Code Section 35-3-1, the 'Good Neighbor Law,' requires written notice to the adjoining landowner. Since 2026, Tallassee also requires proof of this notification for any permit application on a partition fence line.
