Top Fencing Companies in Fayetteville, AR, 72701 | Compare & Call

The Arkansas 811 utility locate service is a mandatory first step. Hitting a buried gas, fiber, or power line in Downtown Fayetteville creates major liability and service disruptions. We manage the 811 ticket and pull any required permits from the Fayetteville Permit Office before mobilization to ensure a compliant, uninterrupted install.

Yes. Arkansas Code 18-44-201, the Partition Fence law, governs shared boundaries. The 2026 legal standard requires written notification to adjoining property owners before altering or replacing a fence on a shared property line. This formal notice protects you from disputes and establishes shared maintenance responsibilities under state law.

Fayetteville zoning allows a 4-foot maximum height in front yards and 8 feet in rear yards. A 0-foot setback permits building directly on the property line. For corner lots, especially near I-49, you must maintain a clear 'sight triangle' at intersections. This is a zoning requirement to prevent visual obstructions for drivers.

The posts are likely above the 12-inch frost line. When soil in this area freezes, it expands and heaves shallow footings upward. IRC Section R403.1.4 requires footings for permanent structures to extend below the local frost depth. Posts not set at least 12 inches deep in concrete will fail from repeated frost cycles.

Yes, when integrated correctly. The 2021 IRC Appendix AG requires pool barriers with self-closing, self-latching gates. A modern smart gate with an IoT-controlled latch and automatic closure meets this standard. It provides an audit trail of access, which strengthens liability protection for Arkansas homeowners.

Material compatibility is critical here. The moderate soil corrosivity index and moderate-to-heavy termite risk demand specific choices. Use pressure-treated wood rated for ground contact or composite materials. For metal posts and fasteners, specify hot-dip galvanized steel to prevent rust streaks from corroding aluminum or steel siding.

We typically schedule a site consultation within 2-3 business days. Our standard route from Dickson Street via I-49 allows for a consistent 15-25 minute response time to most Downtown properties. This consultation confirms measurements, reviews zoning limits, and provides a firm project timeline based on current labor rates.

The design must meet the 115 MPH V-ult wind speed rating. This engineering standard from ASCE 7-22 dictates post spacing, concrete footing size, and bracket strength. A fence in an exposed area must use closer post spacing and reinforced corner assemblies to resist the peak storm season gusts common in this region.