Top Fencing Companies in Murfreesboro, AR, 71958 | Compare & Call

There are 158 fencing companies server in Murfreesboro AR

Benefield Fencing

Benefield Fencing

749 Grant 3515, Sheridan AR 72150
Fences & Gates, Refinishing Services

Benefield Fencing serves homeowners and businesses in Sheridan, AR, and throughout Grant County as a full-service fence contractor. We handle the complete lifecycle of fences and gates: installation, ...

Hamilton Mobile Welding & Fabrication

Hamilton Mobile Welding & Fabrication

101 Strahan Ln, Malvern AR 72104
Metal Fabricators, Fences & Gates, Decks & Railing

Hamilton Mobile Welding & Fabrication brings over a decade of hands-on experience to Malvern and the surrounding communities. As a fully certified and mobile service, we focus on delivering quality me...

Thornton Fencing & Fabrication

Thornton Fencing & Fabrication

Hot Springs AR 71901
Fences & Gates, Metal Fabricators

Thornton Fencing & Fabrication, based in Hot Springs, Arkansas, was built on the belief that customers deserve honest work done right the first time. The owner grew up valuing hard work, punctuality, ...

MVP Powerwashing

MVP Powerwashing

Dierks AR 71833
Pressure Washers, Fences & Gates, Flooring

MVP Powerwashing, based in Dierks, AR, goes beyond cleaning to offer comprehensive property care. Specializing in fence and gate services, decking, staining and sealing, flooring, and siding, the comp...

The Fence Man

The Fence Man

★★★★☆ 3.7 / 5 (3)
1213 N 32nd St, Fort Smith AR 72904
Fences & Gates

Since 1980, The Fence Man has been Fort Smith's trusted source for fences and gates. As a locally owned and operated company, we pride ourselves on sourcing materials from nearby suppliers to support ...

5J Contractors

5J Contractors

★★★★★ 5.0 / 5 (1)
900 South O St, Fort Smith AR 72903
Fences & Gates, Landscape Architects or Designers, Decks & Railing

5J Contractors, a family-owned business based in Fort Smith, AR, has been serving the community for over a decade. Founded on the principle of putting customers first, we prioritize quality over quant...

River Valley Fencing

River Valley Fencing

★★★★★ 4.8 / 5 (5)
809 South Y St, Fort Smith AR 72901
Fences & Gates

River Valley Fencing, a family-owned business in Fort Smith, AR, brings over 16 years of hands-on experience to every project. Founded by Joe Ludwick, the company focuses on delivering solid, reliable...

TOPS Fence & Deck Staining

TOPS Fence & Deck Staining

★★★★★ 5.0 / 5 (1)
Fort Smith AR 72903
Fences & Gates, Pressure Washers, Decks & Railing

Since 2002, TOPS Fence & Deck Staining has been Fort Smith's trusted choice for wood restoration and preservation. Founded by Brian Lahtinen, we specialize in cleaning, staining, and protecting wood u...

Mike Carroll Tree Service and Construction

Mike Carroll Tree Service and Construction

★★★☆☆ 3.4 / 5 (5)
5809 Cedar Break Dr, Fort Smith AR 72916
Tree Services, Landscaping, Fences & Gates

Mike Carroll Tree Service and Construction is a veteran-operated company based in Fort Smith, Arkansas, with over 25 years of experience serving the River Valley. Founded by a U.S. Air Force veteran w...

Fort Smith Garage Door Company

Fort Smith Garage Door Company

★★★☆☆ 3.0 / 5 (2)
5901 S 26th Cir, Fort Smith AR 72908
Garage Door Services, Fences & Gates

Fort Smith Garage Door Company has been a family-owned fixture in the community since 1985, offering sales, service, and repair for residential and commercial garage doors, fence and gate installation...



Estimated Fencing Costs in Murfreesboro, AR

Emergency Fence/Gate RepairStorm / Security Response
$269 - $364
Wood Privacy Fence (Per LF)Estimated Range
$24 - $39
Vinyl / PVC Fencing (Per LF)Estimated Range
$34 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$39 - $59
Standard Driveway Gate InstallEstimated Range
$969 - $1,294

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Murfreesboro. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Q&A

How deep must my fence posts be buried to prevent frost heave in Murfreesboro?

Posts in Downtown Murfreesboro require a 12-inch minimum footing depth to pass below the local frost line. The 2021 IRC, Section R403.1.4.1, mandates this to prevent frost heave, which lifts posts and destroys alignment. For a 115 MPH V-ult wind rating, we increase embedment to 30 inches for structural stability against high-wind uplift forces common in Pike County.

Do smart gates and latches meet Arkansas pool safety codes?

Yes. Integrated IoT latches that self-close and self-latch can meet IRC Appendix AG and Arkansas State Pool Code requirements for barrier security. While smart-gate adoption is low in Murfreesboro, modern systems with alarms and remote monitoring provide an audit trail, which strengthens liability defense. The primary code mandate is a 48-inch minimum height with no more than a 4-inch gap at the bottom.

What are Murfreesboro's height and setback rules for residential fencing?

Zoning limits are 3 feet in front yards and 8 feet in rear yards, with a 0-foot setback allowance on side and rear property lines. A critical exception is the 'sight triangle' at corner lots, especially near US-27. Vegetation and fencing within 25 feet of the intersection corner must remain under 3 feet tall to maintain driver visibility and comply with state traffic safety codes.

What is required before digging fence post holes in Murfreesboro?

You must contact Arkansas 811 at least three business days before excavation. They will mark all public utility lines. Hitting a gas, water, or fiber line in Downtown Murfreesboro results in major repair costs, service outages, and significant liability. We manage the Murfreesboro permit office paperwork concurrently, ensuring the plot plan and construction details meet all local zoning ordinances before the first hole is dug.

How does the 115 MPH wind rating impact my fence design?

The 115 MPH V-ult wind speed is an ultimate design load from ASCE 7-22 standards. This rating dictates post spacing (often 6 feet on-center or less for solid panels), concrete footing size, and the use of through-bolts or structural brackets. Fences near open fields or along US-27 experience higher exposure, requiring these engineering measures to survive peak storm season gusts without panel failure or total blow-over.

What are my legal responsibilities for a fence on the property line in Arkansas?

Arkansas Code 18-44-101, the Partition Fence law, governs shared boundaries. Since 2026, Murfreesboro property owners must provide written notice to adjoining landowners before constructing or replacing a fence on the common line. This law also outlines cost-sharing for 'partition fences'. Failure to notify can result in civil action to recover damages or removal costs.

What is your typical response time for a consultation in Murfreesboro?

Our standard dispatch for a site consultation from the Crater of Diamonds State Park area is 15-20 minutes via US-27. We schedule assessments within 48 hours of inquiry, contingent on Arkansas 811 markout completion. The initial visit includes a zoning verification, wind exposure assessment, and a detailed quote accounting for the local $24/hr average labor rate and 2026 material lead times.

How do Murfreesboro's soil and termite risks affect material selection?

Moderate soil corrosivity and a moderate-to-heavy termite risk demand material compatibility. Pressure-treated pine must be ground-contact rated (UC4A). For steel posts, use hot-dip galvanized coatings. Aluminum or composite materials offer strong resistance. Always specify stainless steel or triple-coated fasteners to prevent rust streaks, which degrade appearance and indicate underlying corrosion.



Scroll to Top
CALL US NOW