Top Fencing Companies in New River, AZ, 85086 | Compare & Call

There are 240 fencing companies server in New River AZ

Ponderosa Exteriors & Metalworks

Ponderosa Exteriors & Metalworks

★★★★★ 5.0 / 5 (1)
130 W Hampton Ave Ste 7, Mesa AZ 85210
Metal Fabricators, Decks & Railing, Fences & Gates

Ponderosa Exteriors & Metalworks is a family-owned home improvement business serving Mesa, Payson, and the East Valley from locations in both cities. We specialize in custom metal fabrication and exte...

Hydro Fencing

Hydro Fencing

★★★★☆ 4.0 / 5 (7)
Glendale AZ 85301
Masonry/Concrete, Fences & Gates

Hydro Fencing, based in Glendale, AZ, combines years of hands-on experience from top Arizona masonry and fencing companies with a fresh commitment to customer service. Established in 2016, we focus on...

Regal Fence Company

Regal Fence Company

★★★★☆ 4.2 / 5 (5)
600 E Chandler Blvd, Chandler AZ 85225
Fences & Gates

Regal Fence Company, a family-owned business based in Chandler, Arizona, specializes in fence and gate solutions for both residential and commercial clients. We offer a wide range of materials, includ...

Side Job Garage Doors

Side Job Garage Doors

★★★★★ 5.0 / 5 (1)
Phoenix AZ 85006
Garage Door Services, Fences & Gates

Side Job Garage Doors is a Phoenix-based business founded by a garage door professional with over 10 years of experience. The company was started to offer customers clear, upfront pricing so they can ...

Arizona Ironworks

Arizona Ironworks

★★★☆☆ 3.0 / 5 (2)
1105 E Van Buren St, Phoenix AZ 85006
Fences & Gates, Decks & Railing

Arizona Ironworks has been a family-owned fixture in the Phoenix valley since 2008. We specialize in building and repairing fences, gates, decks, and railings for residential properties. Fully license...

Handymanpro

Handymanpro

★★★★★ 5.0 / 5 (2)
14021 N Edgeworth Dr, Fountain Hills AZ 85268
Handyman, General Contractors, Fences & Gates

Handymanpro in Fountain Hills, AZ, is a full-service residential maintenance and repair company. The owner, a lifelong construction professional who built custom homes and large estates, returned to F...

Golden Valley Welding

Golden Valley Welding

★★★★★ 5.0 / 5 (2)
Phoenix AZ 85008
Fences & Gates, Metal Fabricators

Golden Valley Welding is a military-owned and operated metal fabrication company serving homeowners and businesses across Phoenix, Gilbert, Queen Creek, San Tan Valley, Paradise Valley, and all of Mar...

Knyte Industries

Knyte Industries

★★★★★ 5.0 / 5 (2)
2227 W Sierra St, Phoenix AZ 85029
Fences & Gates

Knyte Industries serves homeowners across Phoenix, AZ, as a trusted fence contractor focused on quality and personal service. From wood fences that withstand the intense summer heat to reliable gates ...

Entry Brite

Entry Brite

★★★★★ 4.5 / 5 (41)
Phoenix AZ 85040
Windows Installation, Glass & Mirrors, Fences & Gates

Entry Brite, based in Phoenix, AZ, specializes in transforming entryways with custom leaded glass and wrought iron designs. For over a decade, we have served homeowners near the Biltmore area, Camelba...

MB Welds

MB Welds

★★★★★ 5.0 / 5 (1)
3827 West Tuckey Ln, Phoenix AZ 85019
Fences & Gates, Metal Fabricators

MB Welds, based in Phoenix, AZ, specializes in fence and gate installation, repair, and painting or staining. As experienced metal fabricators, they solve common local fencing problems like gate misal...



Estimated Fencing Costs in New River, AZ

Emergency Fence/Gate RepairStorm / Security Response
$304 - $409
Wood Privacy Fence (Per LF)Estimated Range
$29 - $44
Vinyl / PVC Fencing (Per LF)Estimated Range
$39 - $59
Chain Link Installation (Per LF)Estimated Range
$19 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$44 - $64
Standard Driveway Gate InstallEstimated Range
$1,089 - $1,459

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for New River. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Q&A

Am I legally required to notify my neighbor before building a fence in New River?

Yes. Arizona Revised Statutes 12-1251, the 'Good Neighbor Fence Law,' mandates specific actions for shared boundary lines. As of 2026, you must provide a formal written notice to adjoining landowners before replacing a partition fence. This law outlines cost-sharing and dispute resolution procedures for New River property owners.

How deep should fence posts be set in New River to prevent frost damage?

Fence posts in Arizona require robust footings for lateral stability, not frost depth. The New River Residential Estates area has a V-ult wind speed of 115 MPH. Per IRC guidelines, a 6-foot post in this wind zone must be set in a concrete footing with a depth-to-width ratio that resists overturning. We engineer footings to withstand peak storm season gusts common near I-17.

What are the fence height and placement rules for my New River property?

New River zoning enforces a 3-foot height limit in front yards and a 6-foot limit in rear yards. The setback regulation allows installation directly on the property line. For corner lots, you must maintain a clear 'sight triangle' at intersections for driver visibility. This is critical for lots near major corridors like I-17 to prevent traffic hazards.

Can I install a smart gate on a pool fence and meet safety codes?

Yes. A smart gate with an automatic closing and self-latching IoT mechanism can meet the ANSI/APSP-7 barrier standard for residential pools. The integrated latch must actuate within 5 seconds of release. We specify hardware that logs access attempts, meeting modern liability standards for Arizona homeowners with pools.

What are the critical steps before digging fence post holes?

You must contact Arizona 811 for a utility locate at least two full business days before excavation. Hitting an unmarked line in the New River Residential Estates carries major financial and safety liability. We manage this process and coordinate any required permits with the local office to ensure the project starts without legal delay.

What fencing materials resist termites and soil corrosion in New River?

The soil corrosivity index here is moderate, and termite risk is moderate to heavy. Pressure-treated wood must be rated for ground contact and use stainless steel or G90 galvanized fasteners to prevent rust streaks. Non-wood options like vinyl or aluminum are immune to termites and perform well in this environment with proper mounting brackets.

How soon can you start a fence project in New River, and what is your consultation process?

We schedule consultations within 48-72 hours of inquiry. Our standard route from the New River Nature Preserve area uses I-17, with a typical travel time of 35-45 minutes to most neighborhoods. The initial site visit assesses zoning compliance, wind exposure, and material compatibility to provide a firm scope and schedule.

How do you build a fence to handle the high winds in New River?

The V-ult wind speed of 115 MPH dictates the structural design. We use ASCE 7-22 standards to calculate wind pressure. This engineering specifies closer post spacing (often 6 feet on-center), deeper concrete footings, and through-bolt connections instead of face-fastened brackets. This design resists the high gusts common in open areas near the New River Nature Preserve.



Scroll to Top
CALL US NOW