Top Fencing Companies in New River, AZ, 85086 | Compare & Call

There are 240 fencing companies server in New River AZ

Rad Iron Designs & Fabrication

Rad Iron Designs & Fabrication

★★★★★ 5.0 / 5 (1)
Wittmann AZ 85361
Metal Fabricators, Fences & Gates

Rad Iron Designs & Fabrication, based in Wittmann, Arizona, specializes in custom metal fabrication for residential and commercial clients. Founded in 2019 by a welder with over 12 years of experience...

Renovate Your Gate

Renovate Your Gate

★★★★★ 5.0 / 5 (1)
4435 E Chandler Blvd Ste 200, Phoenix AZ 85044
Fences & Gates

Renovate Your Gate is a family-owned custom gate builder and installer serving Phoenix, AZ, and nearby areas like the neighborhoods around South Mountain Park and the Biltmore district. We specialize ...

Reyes Services

Reyes Services

★★☆☆☆ 2.0 / 5 (8)
Cottonwood AZ 86326
Landscaping, Masonry/Concrete, Fences & Gates

Reyes Services, founded by Lorenzo A. Reyes in Cottonwood, AZ, was born from a simple belief: quality landscaping, fencing, and masonry shouldn't break your budget. With over a decade of experience, L...

White Knight Welding

White Knight Welding

Phoenix AZ 85016
Metal Fabricators, Trailer Repair, Fences & Gates

White Knight Welding LLC, founded by Simeon Meier in early 2025, brings a wealth of experience from structural steel to aluminum assemblies since 2019. Based in Phoenix, AZ, this locally owned repair ...

Elite Garage Doors Repair, Openers & Security Gates

Elite Garage Doors Repair, Openers & Security Gates

★★☆☆☆ 1.7 / 5 (41)
7652 E Greenway Rd Ste 100, Scottsdale AZ 85260
Fences & Gates, Garage Door Services

Elite Garage Doors Repair, Openers & Security Gates serves Scottsdale and the greater Phoenix area with installation, repair, and maintenance of automatic garage doors, openers, and security gates. Th...

Arizona State Contractors

Arizona State Contractors

3310 W Acoma Dr, Phoenix AZ 85053
General Contractors, Fences & Gates, Decks & Railing

Arizona State Contractors is a licensed building contractor located in Phoenix, Arizona, serving homeowners and businesses throughout the greater metropolitan area. The company specializes in home ren...

Barragan Welding

Barragan Welding

Phoenix AZ 85009
Fences & Gates

Barragan Welding has been serving Phoenix homeowners with expert fence and gate services. The dry heat and monsoon storms accelerate wear, causing aging wood fences and rusting ornamental iron. Barrag...

Garage Doors America

Garage Doors America

★★★★★ 4.8 / 5 (16)
14042 N 133rd Ln, Surprise AZ 85379
Garage Door Services, Fences & Gates, Metal Fabricators

Garage Doors America (GDA) has been serving Surprise, AZ, since the late 80s. As a family-owned and operated business, we are licensed, bonded, and insured. We sell, repair, and service all brands of ...

Firebird Fabrication

Firebird Fabrication

3817 W Barnes Ln, Phoenix AZ 85051
Auto Repair, Metal Fabricators, Fences & Gates

Firebird Fabrication & Mechanic, based in Phoenix, AZ, brings together over 12 years of welding expertise and 8 years of automotive mechanic experience. Owner-operated with a strong commitment to prec...

Gates And More

Gates And More

3752 W Medinah Way, Phoenix AZ 85086
Handyman, Fences & Gates

Gates And More is a trusted handyman and fence service based in Phoenix, AZ, serving neighborhoods near Camelback Mountain, the Biltmore area, and central Phoenix. We specialize in tackling common loc...



Estimated Fencing Costs in New River, AZ

Emergency Fence/Gate RepairStorm / Security Response
$304 - $409
Wood Privacy Fence (Per LF)Estimated Range
$29 - $44
Vinyl / PVC Fencing (Per LF)Estimated Range
$39 - $59
Chain Link Installation (Per LF)Estimated Range
$19 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$44 - $64
Standard Driveway Gate InstallEstimated Range
$1,089 - $1,459

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for New River. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Q&A

Am I legally required to notify my neighbor before building a fence in New River?

Yes. Arizona Revised Statutes 12-1251, the 'Good Neighbor Fence Law,' mandates specific actions for shared boundary lines. As of 2026, you must provide a formal written notice to adjoining landowners before replacing a partition fence. This law outlines cost-sharing and dispute resolution procedures for New River property owners.

How deep should fence posts be set in New River to prevent frost damage?

Fence posts in Arizona require robust footings for lateral stability, not frost depth. The New River Residential Estates area has a V-ult wind speed of 115 MPH. Per IRC guidelines, a 6-foot post in this wind zone must be set in a concrete footing with a depth-to-width ratio that resists overturning. We engineer footings to withstand peak storm season gusts common near I-17.

What are the fence height and placement rules for my New River property?

New River zoning enforces a 3-foot height limit in front yards and a 6-foot limit in rear yards. The setback regulation allows installation directly on the property line. For corner lots, you must maintain a clear 'sight triangle' at intersections for driver visibility. This is critical for lots near major corridors like I-17 to prevent traffic hazards.

Can I install a smart gate on a pool fence and meet safety codes?

Yes. A smart gate with an automatic closing and self-latching IoT mechanism can meet the ANSI/APSP-7 barrier standard for residential pools. The integrated latch must actuate within 5 seconds of release. We specify hardware that logs access attempts, meeting modern liability standards for Arizona homeowners with pools.

What are the critical steps before digging fence post holes?

You must contact Arizona 811 for a utility locate at least two full business days before excavation. Hitting an unmarked line in the New River Residential Estates carries major financial and safety liability. We manage this process and coordinate any required permits with the local office to ensure the project starts without legal delay.

What fencing materials resist termites and soil corrosion in New River?

The soil corrosivity index here is moderate, and termite risk is moderate to heavy. Pressure-treated wood must be rated for ground contact and use stainless steel or G90 galvanized fasteners to prevent rust streaks. Non-wood options like vinyl or aluminum are immune to termites and perform well in this environment with proper mounting brackets.

How soon can you start a fence project in New River, and what is your consultation process?

We schedule consultations within 48-72 hours of inquiry. Our standard route from the New River Nature Preserve area uses I-17, with a typical travel time of 35-45 minutes to most neighborhoods. The initial site visit assesses zoning compliance, wind exposure, and material compatibility to provide a firm scope and schedule.

How do you build a fence to handle the high winds in New River?

The V-ult wind speed of 115 MPH dictates the structural design. We use ASCE 7-22 standards to calculate wind pressure. This engineering specifies closer post spacing (often 6 feet on-center), deeper concrete footings, and through-bolt connections instead of face-fastened brackets. This design resists the high gusts common in open areas near the New River Nature Preserve.



Scroll to Top
CALL US NOW