Top Fencing Companies in New River, AZ, 85086 | Compare & Call

There are 240 fencing companies server in New River AZ

Davis Forge Fabrication

Davis Forge Fabrication

★★★★★ 5.0 / 5 (2)
Phoenix AZ 85304
Metal Fabricators, Fences & Gates

Davis Forge Fabrication, a Phoenix-based ornamental iron fabrication company, specializes in custom metalwork including gates, fences, railings, and decorative accents. Founded by Demetri, who turned ...

SG Fabrication

SG Fabrication

★★★★☆ 4.0 / 5 (4)
Glendale AZ 85301
Fences & Gates, Metal Fabricators

SG Fabrication LLC in Glendale, AZ, provides metal fabrication and fence installation for both residential and commercial clients. Their facility produces security gates, RV gates, driveway gates, and...

Integrated Metal Structures

Integrated Metal Structures

Phoenix AZ 85023
Fences & Gates, Patio Coverings, Decks & Railing

Integrated Metal Structures, based in Phoenix, AZ, is a wrought iron contractor specializing in custom gates, fencing, pergolas, trellises, stair railings, and more. With a focus on understanding each...

Landshark Gates

Landshark Gates

★★★★★ 4.7 / 5 (14)
29611 N 203rd Dr, Wittmann AZ 85361
Fences & Gates, Metal Fabricators

Landshark Gates, based in Wittmann, AZ, specializes in custom gate fabrication and installation for residential and commercial properties. We offer new gate fabrication, restoration, and welding repai...

Brust Fencing and Gates Company

Brust Fencing and Gates Company

★★★★★ 5.0 / 5 (12)
Williams AZ 86046
Fences & Gates, Carpenters, Decks & Railing

Brust Fencing and Gates is a licensed, bonded, and insured contractor based in Williams, AZ, serving all of Northern Arizona. They hold Arizona Contractor Licenses #338157 for Fencing and #341047 for ...

Glendale Welding

Glendale Welding

★★★★★ 4.8 / 5 (11)
7341 W St John Rd, Glendale AZ 85308
Fences & Gates, Awnings, Patio Coverings

Glendale Welding, operating under licensed contractor Natural Blends Re Paints LLC (ROC 337464), has been serving the Phoenix valley since 2004. Our founder has been performing custom coatings and iro...

2nd Generation Builders

2nd Generation Builders

★★★★★ 5.0 / 5 (1)
Scottsdale AZ 85259
Decks & Railing, General Contractors, Fences & Gates

2nd Generation Builders, led by Brandon McCord, brings eight years of contracting experience from Oxford, Mississippi to Scottsdale, Arizona. As a second-generation builder, Brandon combines family tr...

Katchakid

Katchakid

★★★★★ 4.7 / 5 (76)
1920 E 3rd St, Tempe AZ 85281
Hot Tub & Pool, Fences & Gates, Childproofing

For over 40 years, Katchakid has provided pool safety solutions for families in Tempe and beyond. Based in Tempe, AZ, we specialize in childproofing, fence and gate installation, and automatic gate sy...

Progressive Fence Corp

Progressive Fence Corp

★★★☆☆ 3.0 / 5 (8)
5626 W North Ln, Glendale AZ 85302
Fences & Gates, Masonry/Concrete

Founded in 1992, Progressive Fence Corp in Glendale, AZ, is a licensed and insured company specializing in fences, gates, masonry, and concrete for residential and commercial properties. With over 40 ...

Azoutlaw Weldin & Fencin

Azoutlaw Weldin & Fencin

★★★★☆ 4.0 / 5 (4)
Phoenix AZ 85035
Metal Fabricators, Fences & Gates, Trailer Repair

Azoutlaw Weldin & Fencin provides expert fence and gate services in Phoenix, AZ, specializing in repairing sagging gates and aging fence materials common in the area. Whether you're near the historic ...



Estimated Fencing Costs in New River, AZ

Emergency Fence/Gate RepairStorm / Security Response
$304 - $409
Wood Privacy Fence (Per LF)Estimated Range
$29 - $44
Vinyl / PVC Fencing (Per LF)Estimated Range
$39 - $59
Chain Link Installation (Per LF)Estimated Range
$19 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$44 - $64
Standard Driveway Gate InstallEstimated Range
$1,089 - $1,459

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for New River. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Q&A

Am I legally required to notify my neighbor before building a fence in New River?

Yes. Arizona Revised Statutes 12-1251, the 'Good Neighbor Fence Law,' mandates specific actions for shared boundary lines. As of 2026, you must provide a formal written notice to adjoining landowners before replacing a partition fence. This law outlines cost-sharing and dispute resolution procedures for New River property owners.

How deep should fence posts be set in New River to prevent frost damage?

Fence posts in Arizona require robust footings for lateral stability, not frost depth. The New River Residential Estates area has a V-ult wind speed of 115 MPH. Per IRC guidelines, a 6-foot post in this wind zone must be set in a concrete footing with a depth-to-width ratio that resists overturning. We engineer footings to withstand peak storm season gusts common near I-17.

What are the fence height and placement rules for my New River property?

New River zoning enforces a 3-foot height limit in front yards and a 6-foot limit in rear yards. The setback regulation allows installation directly on the property line. For corner lots, you must maintain a clear 'sight triangle' at intersections for driver visibility. This is critical for lots near major corridors like I-17 to prevent traffic hazards.

Can I install a smart gate on a pool fence and meet safety codes?

Yes. A smart gate with an automatic closing and self-latching IoT mechanism can meet the ANSI/APSP-7 barrier standard for residential pools. The integrated latch must actuate within 5 seconds of release. We specify hardware that logs access attempts, meeting modern liability standards for Arizona homeowners with pools.

What are the critical steps before digging fence post holes?

You must contact Arizona 811 for a utility locate at least two full business days before excavation. Hitting an unmarked line in the New River Residential Estates carries major financial and safety liability. We manage this process and coordinate any required permits with the local office to ensure the project starts without legal delay.

What fencing materials resist termites and soil corrosion in New River?

The soil corrosivity index here is moderate, and termite risk is moderate to heavy. Pressure-treated wood must be rated for ground contact and use stainless steel or G90 galvanized fasteners to prevent rust streaks. Non-wood options like vinyl or aluminum are immune to termites and perform well in this environment with proper mounting brackets.

How soon can you start a fence project in New River, and what is your consultation process?

We schedule consultations within 48-72 hours of inquiry. Our standard route from the New River Nature Preserve area uses I-17, with a typical travel time of 35-45 minutes to most neighborhoods. The initial site visit assesses zoning compliance, wind exposure, and material compatibility to provide a firm scope and schedule.

How do you build a fence to handle the high winds in New River?

The V-ult wind speed of 115 MPH dictates the structural design. We use ASCE 7-22 standards to calculate wind pressure. This engineering specifies closer post spacing (often 6 feet on-center), deeper concrete footings, and through-bolt connections instead of face-fastened brackets. This design resists the high gusts common in open areas near the New River Nature Preserve.



Scroll to Top
CALL US NOW