Top Fencing Companies in Phoenix, AZ, 85001 | Compare & Call
There are 240 fencing companies server in Phoenix AZ
Diamond Masonry & Landscape
Diamond Masonry & Landscape, based in Surprise, AZ, brings over 30 years of combined experience to every project. As a licensed, bonded, and insured masonry and landscaping service, we specialize in t...
Hopkins Fence Company serves Wickenburg, AZ, and nearby areas, specializing in fence and gate installations, repairs, and maintenance. Many local homes face fencing issues like cracked wooden boards a...
CH Fence & Barn, LLC, based in Hillside, AZ, serves Wickenburg and surrounding areas with expert fence and gate services. Owned and operated by Clint Harry, a member of the Pyramid Lake Paiute Tribe, ...
DCS Pool Barriers, LLC has been a trusted provider of pool safety fences, gates, and childproofing solutions in the Phoenix area for over 20 years. We manufacture our own line of pool barriers and gat...
Diamond Iron LLC is a licensed fencing contractor based in Glendale, AZ, with over 50 years of combined experience serving residential and commercial clients across the greater Phoenix area. We specia...
Diamondback Carports
Diamondback Carports has been serving Phoenix and the surrounding areas since 1988. As a family-owned and operated business, we specialize in the installation and repair of steel carports, canopies, s...
Grunt Welding & Services, LLC, owned by Mike Gomez, is a mobile welding company serving all of Arizona, with a focus on custom and repair welding. Based in Phoenix, Mike brings over a decade of experi...
Hopkins Fence serves Wickenburg, AZ, addressing common fencing issues like gate hinge wear and sun-induced fading. Located near the historic Hassayampa River Preserve and the downtown Wickenburg area,...
Homestead Fence Co, based in Mesa, AZ, has been serving the community for over 23 years. Founded by Jim, a veteran in construction with 25+ years of experience, the company pioneered the vinyl fence i...
Radiant Wall
Radiant Wall LLC, based in Glendale, AZ, provides home and building improvement services specializing in window installation, repair, and replacement, door sales and installation, and fences and gates...
Estimated Fencing Costs in Phoenix, AZ
Questions and Answers
Can I have a smart gate that also meets pool code?
Yes. A smart gate system with an integrated IoT-controlled latch can meet Arizona's pool safety code. The code requires a self-closing, self-latching gate with the latch mechanism placed at least 54 inches above grade. The electronic actuator must fail securely in the latched position. This integration is a high trend for 2026, addressing both convenience and liability standards.
Why do you say footings are critical in Phoenix? There is no frost line.
The IRC R403.1.4 standard requires footings for structural stability, not just frost protection. In Uptown Phoenix, the 115 MPH V-ult wind load rating creates significant uplift and overturning forces. A footing with proper mass and a positive connection to the post is mandatory to prevent fence failure during monsoon season gusts. Without it, posts act as levers and will pull out of the ground.
What is required before you dig the first post hole?
Arizona 811 utility locate is the law. Hitting a buried line in the Uptown neighborhood carries major repair costs and liability. We manage the 811 ticket and coordinate the locates. Once clear, we pull the required Phoenix permit. The permit office reviews for zoning height, setback, and pool barrier compliance if applicable. No excavation occurs without both steps being complete.
What are the height rules for a fence on my corner lot?
Phoenix zoning limits are 3 feet in the front yard and 6 feet in the rear. A corner lot has two front yards. The critical regulation is the visibility 'sight triangle' at the intersection. No obstruction over 3 feet high is permitted within this triangle. For lots near I-17, this rule is strictly enforced for traffic safety. The 0-foot setback allows installation directly on your property line.
How do you build a fence to survive the monsoon winds?
The 115 MPH V-ult wind speed dictates the engineering. We increase post concrete mass, reduce panel span to 6 feet or less, and use ASCE 7-22 wind load calculations to specify post depth and diameter. All brackets must be galvanized for the calculated uplift force. This design prevents the sequential failure seen in standard fences during peak storm season gusts off the I-17 corridor.
How soon can you start a consultation for a new fence?
We dispatch a project manager for a site assessment typically within 48 hours of inquiry. For the Uptown area, the standard route is from Steele Indian School Park via the I-17 access roads. Given current traffic patterns, expect a 25 to 35 minute travel window for the consultation. We will review your survey, zoning limits, and design goals on site.
What fence material lasts longest with Phoenix termites and soil?
Given the Very Heavy termite risk and Moderate soil corrosivity, non-organic materials are required. Powder-coated aluminum or heavy-gauge galvanized steel are optimal. Use stainless steel fasteners for all connections; standard galvanized screws will corrode and cause rust streaks on the finish. Wood and wood-composite materials are not viable here due to rapid termite infestation.
Am I legally required to talk to my neighbor before replacing our shared fence?
Yes. Arizona Revised Statutes § 9-462.01, the 'Good Neighbor' fence law, requires you to provide written notice to adjoining landowners before replacing a shared boundary fence. This is a strict 2026 requirement in Phoenix. Failure to provide proper notice can affect cost-sharing and lead to disputes under common law partition fence principles.