Top Fencing Companies in Phoenix, AZ, 85001 | Compare & Call
There are 240 fencing companies server in Phoenix AZ
Full Spectrum Artworks
Full Spectrum Artworks, founded in 2015 by a Phoenix metal artist with 25 years of welding experience and a decade in fine art foundries, creates custom gates, fences, awnings, and furniture. The prac...
Emerald Fence Company has been serving Cave Creek since 1994, with family roots in fencing dating back to 1974. We specialize in installing masonry fences, retaining walls, and repairing damaged or ra...
Sunset Masonry, a family-owned business operating out of Tempe, AZ, has been delivering expert masonry and fencing services since 1977. Luke, the owner, oversees a licensed and bonded team (CR-31, CR-...
ASE Iron Work is a family-owned company based in Phoenix, AZ, with over 20 years of experience serving both residential and commercial clients across the valley. We specialize in iron work, block work...
Castillo Pro Welding is a trusted metal fabrication and fencing company serving Phoenix, AZ. We specialize in fence and gate installation, repair, and custom metal fabrication for residential and comm...
Ace Fence Co has served Glendale, AZ, since 1990, specializing in custom wrought iron fencing and gates. Unlike typical fence companies, we fabricate our own products in-house, ensuring quality contro...
RS Fence in Youngtown, AZ, is a licensed, bonded, and insured custom fabrication company specializing in gates, fencing, and railing. With a focus on quality craftsmanship, they provide both new insta...
Aldo's Iron Fabrication is a family-owned fencing contractor based in Glendale, AZ, serving the West Valley since 2006. Specializing in custom iron fabrication, we handle fences, gates, security doors...
JM Custom Iron Work
JM Custom Iron Work is a family-owned custom ironwork business based in Phoenix, AZ, with over 13 years of experience in the valley. We specialize in designing and fabricating ornamental iron pieces, ...
Pinnacle Fencing Solutions, a family-owned business in Phoenix, AZ, has been serving the community since 2005. Our roots in fencing run deep, continuing a family tradition started by our grandfather i...
Estimated Fencing Costs in Phoenix, AZ
Questions and Answers
Can I have a smart gate that also meets pool code?
Yes. A smart gate system with an integrated IoT-controlled latch can meet Arizona's pool safety code. The code requires a self-closing, self-latching gate with the latch mechanism placed at least 54 inches above grade. The electronic actuator must fail securely in the latched position. This integration is a high trend for 2026, addressing both convenience and liability standards.
Why do you say footings are critical in Phoenix? There is no frost line.
The IRC R403.1.4 standard requires footings for structural stability, not just frost protection. In Uptown Phoenix, the 115 MPH V-ult wind load rating creates significant uplift and overturning forces. A footing with proper mass and a positive connection to the post is mandatory to prevent fence failure during monsoon season gusts. Without it, posts act as levers and will pull out of the ground.
What is required before you dig the first post hole?
Arizona 811 utility locate is the law. Hitting a buried line in the Uptown neighborhood carries major repair costs and liability. We manage the 811 ticket and coordinate the locates. Once clear, we pull the required Phoenix permit. The permit office reviews for zoning height, setback, and pool barrier compliance if applicable. No excavation occurs without both steps being complete.
What are the height rules for a fence on my corner lot?
Phoenix zoning limits are 3 feet in the front yard and 6 feet in the rear. A corner lot has two front yards. The critical regulation is the visibility 'sight triangle' at the intersection. No obstruction over 3 feet high is permitted within this triangle. For lots near I-17, this rule is strictly enforced for traffic safety. The 0-foot setback allows installation directly on your property line.
How do you build a fence to survive the monsoon winds?
The 115 MPH V-ult wind speed dictates the engineering. We increase post concrete mass, reduce panel span to 6 feet or less, and use ASCE 7-22 wind load calculations to specify post depth and diameter. All brackets must be galvanized for the calculated uplift force. This design prevents the sequential failure seen in standard fences during peak storm season gusts off the I-17 corridor.
How soon can you start a consultation for a new fence?
We dispatch a project manager for a site assessment typically within 48 hours of inquiry. For the Uptown area, the standard route is from Steele Indian School Park via the I-17 access roads. Given current traffic patterns, expect a 25 to 35 minute travel window for the consultation. We will review your survey, zoning limits, and design goals on site.
What fence material lasts longest with Phoenix termites and soil?
Given the Very Heavy termite risk and Moderate soil corrosivity, non-organic materials are required. Powder-coated aluminum or heavy-gauge galvanized steel are optimal. Use stainless steel fasteners for all connections; standard galvanized screws will corrode and cause rust streaks on the finish. Wood and wood-composite materials are not viable here due to rapid termite infestation.
Am I legally required to talk to my neighbor before replacing our shared fence?
Yes. Arizona Revised Statutes § 9-462.01, the 'Good Neighbor' fence law, requires you to provide written notice to adjoining landowners before replacing a shared boundary fence. This is a strict 2026 requirement in Phoenix. Failure to provide proper notice can affect cost-sharing and lead to disputes under common law partition fence principles.