Top Fencing Companies in Phoenix, AZ, 85001 | Compare & Call
There are 240 fencing companies server in Phoenix AZ
Gomez Block Fence provides professional fence and gate services in Phoenix, AZ. Located near the vibrant neighborhoods of Encanto and Arcadia, we specialize in addressing common local issues like brok...
Renovate Your Gate is a family-owned custom gate builder and installer serving Phoenix, AZ, and nearby areas like the neighborhoods around South Mountain Park and the Biltmore district. We specialize ...
Reyes Services, founded by Lorenzo A. Reyes in Cottonwood, AZ, was born from a simple belief: quality landscaping, fencing, and masonry shouldn't break your budget. With over a decade of experience, L...
Cactus Fence, LLC is a family-owned and operated fencing company serving Phoenix, AZ, and surrounding areas. We provide a wide range of services for both residential and commercial properties, includi...
White Knight Welding LLC, founded by Simeon Meier in early 2025, brings a wealth of experience from structural steel to aluminum assemblies since 2019. Based in Phoenix, AZ, this locally owned repair ...
Jeff and Waylon's Improvements is a trusted handyman and fencing company serving Phoenix, AZ. Specializing in fence and gate installation, repair, and weatherproofing, they tackle common local problem...
Elite Garage Doors Repair, Openers & Security Gates
Elite Garage Doors Repair, Openers & Security Gates serves Scottsdale and the greater Phoenix area with installation, repair, and maintenance of automatic garage doors, openers, and security gates. Th...
Arizona State Contractors
Arizona State Contractors is a licensed building contractor located in Phoenix, Arizona, serving homeowners and businesses throughout the greater metropolitan area. The company specializes in home ren...
2 Geezers Gate Refurbish is a veteran-owned fence and gate company based in Queen Creek, Arizona. Founded by two retired friends, we specialize in transforming side yard gates by replacing cracked, st...
Barragan Welding has been serving Phoenix homeowners with expert fence and gate services. The dry heat and monsoon storms accelerate wear, causing aging wood fences and rusting ornamental iron. Barrag...
Estimated Fencing Costs in Phoenix, AZ
Questions and Answers
Can I have a smart gate that also meets pool code?
Yes. A smart gate system with an integrated IoT-controlled latch can meet Arizona's pool safety code. The code requires a self-closing, self-latching gate with the latch mechanism placed at least 54 inches above grade. The electronic actuator must fail securely in the latched position. This integration is a high trend for 2026, addressing both convenience and liability standards.
Why do you say footings are critical in Phoenix? There is no frost line.
The IRC R403.1.4 standard requires footings for structural stability, not just frost protection. In Uptown Phoenix, the 115 MPH V-ult wind load rating creates significant uplift and overturning forces. A footing with proper mass and a positive connection to the post is mandatory to prevent fence failure during monsoon season gusts. Without it, posts act as levers and will pull out of the ground.
What is required before you dig the first post hole?
Arizona 811 utility locate is the law. Hitting a buried line in the Uptown neighborhood carries major repair costs and liability. We manage the 811 ticket and coordinate the locates. Once clear, we pull the required Phoenix permit. The permit office reviews for zoning height, setback, and pool barrier compliance if applicable. No excavation occurs without both steps being complete.
What are the height rules for a fence on my corner lot?
Phoenix zoning limits are 3 feet in the front yard and 6 feet in the rear. A corner lot has two front yards. The critical regulation is the visibility 'sight triangle' at the intersection. No obstruction over 3 feet high is permitted within this triangle. For lots near I-17, this rule is strictly enforced for traffic safety. The 0-foot setback allows installation directly on your property line.
How do you build a fence to survive the monsoon winds?
The 115 MPH V-ult wind speed dictates the engineering. We increase post concrete mass, reduce panel span to 6 feet or less, and use ASCE 7-22 wind load calculations to specify post depth and diameter. All brackets must be galvanized for the calculated uplift force. This design prevents the sequential failure seen in standard fences during peak storm season gusts off the I-17 corridor.
How soon can you start a consultation for a new fence?
We dispatch a project manager for a site assessment typically within 48 hours of inquiry. For the Uptown area, the standard route is from Steele Indian School Park via the I-17 access roads. Given current traffic patterns, expect a 25 to 35 minute travel window for the consultation. We will review your survey, zoning limits, and design goals on site.
What fence material lasts longest with Phoenix termites and soil?
Given the Very Heavy termite risk and Moderate soil corrosivity, non-organic materials are required. Powder-coated aluminum or heavy-gauge galvanized steel are optimal. Use stainless steel fasteners for all connections; standard galvanized screws will corrode and cause rust streaks on the finish. Wood and wood-composite materials are not viable here due to rapid termite infestation.
Am I legally required to talk to my neighbor before replacing our shared fence?
Yes. Arizona Revised Statutes § 9-462.01, the 'Good Neighbor' fence law, requires you to provide written notice to adjoining landowners before replacing a shared boundary fence. This is a strict 2026 requirement in Phoenix. Failure to provide proper notice can affect cost-sharing and lead to disputes under common law partition fence principles.