Top Fencing Companies in Scottsdale, AZ, 85250 | Compare & Call
There are 240 fencing companies server in Scottsdale AZ
Full Spectrum Artworks
Full Spectrum Artworks, founded in 2015 by a Phoenix metal artist with 25 years of welding experience and a decade in fine art foundries, creates custom gates, fences, awnings, and furniture. The prac...
Emerald Fence Company has been serving Cave Creek since 1994, with family roots in fencing dating back to 1974. We specialize in installing masonry fences, retaining walls, and repairing damaged or ra...
Sunset Masonry, a family-owned business operating out of Tempe, AZ, has been delivering expert masonry and fencing services since 1977. Luke, the owner, oversees a licensed and bonded team (CR-31, CR-...
ASE Iron Work is a family-owned company based in Phoenix, AZ, with over 20 years of experience serving both residential and commercial clients across the valley. We specialize in iron work, block work...
Castillo Pro Welding is a trusted metal fabrication and fencing company serving Phoenix, AZ. We specialize in fence and gate installation, repair, and custom metal fabrication for residential and comm...
Ace Fence Co has served Glendale, AZ, since 1990, specializing in custom wrought iron fencing and gates. Unlike typical fence companies, we fabricate our own products in-house, ensuring quality contro...
RS Fence in Youngtown, AZ, is a licensed, bonded, and insured custom fabrication company specializing in gates, fencing, and railing. With a focus on quality craftsmanship, they provide both new insta...
Aldo's Iron Fabrication is a family-owned fencing contractor based in Glendale, AZ, serving the West Valley since 2006. Specializing in custom iron fabrication, we handle fences, gates, security doors...
JM Custom Iron Work
JM Custom Iron Work is a family-owned custom ironwork business based in Phoenix, AZ, with over 13 years of experience in the valley. We specialize in designing and fabricating ornamental iron pieces, ...
Pinnacle Fencing Solutions, a family-owned business in Phoenix, AZ, has been serving the community since 2005. Our roots in fencing run deep, continuing a family tradition started by our grandfather i...
Estimated Fencing Costs in Scottsdale, AZ
Q&A
Why do footings matter in Scottsdale with a 0-inch frost line?
Frost heave is not a factor, but lateral wind loads are. The 105 MPH V-ult wind speed for Old Town Scottsdale dictates footing design per IRC R403.1.6. Posts require concrete footings sized for overturning moments. Undersized footings near Loop 101 fail during peak storm season monsoon gusts.
What is the consultation timeline for a project in Old Town Scottsdale?
Initial consultation typically occurs within 48 hours. Our route from Scottsdale Fashion Square via Loop 101 yields a 25–35 minute response to most Old Town addresses. Site assessment includes zoning verification, wind exposure review, and a material compatibility check.
What fencing materials work best for Scottsdale's termite and soil conditions?
Very heavy termite risk rules out wood posts in ground contact. Use steel posts with a G90 galvanized or powder-coated finish for moderate soil corrosivity. Aluminum or composite materials are alternatives. Stainless steel fasteners prevent rust streaks on stucco.
What are the 2026 legal requirements for a shared fence in Scottsdale?
Arizona Revised Statutes 37-1301 requires written notice to adjacent property owners for any shared boundary work. In 2026, certified mail is the standard for documentation. This 'good neighbor law' is strictly enforced, especially in Old Town where lot lines are precise.
How do smart gates meet modern pool safety and security standards?
Integrated IoT gate operators must comply with the Arizona pool safety code: self-closing, self-latching, 54-inch height, and non-climbable construction. The 2026 standard pairs a smart latch with a hardwired backup to meet liability requirements. Access logs provide audit trails.
How does the 105 MPH wind rating affect fence design?
The V-ult wind speed of 105 MPH is an ultimate design load per ASCE 7-22. This dictates post spacing, concrete footing mass, and bracket strength. Open designs like aluminum rail reduce wind pressure. Solid privacy fences require deeper posts and continuous footings to survive gusts.
What are the height and setback rules for a Scottsdale property?
Zoning limits are 3 feet in the front setback and 6 feet in rear/side yards. A 0-foot setback is allowed on the rear and side property lines. Corner lots must maintain a clear 'sight triangle' for traffic visibility; fencing within 30 feet of the intersection near Loop 101 is typically restricted to 3 feet.
What is required before digging fence post holes in Old Town?
Call Arizona 811 for utility locates at least two working days before excavation. Hitting a line in a historic district like Old Town causes major service disruption and liability. The city permit office requires the 811 ticket number and a site plan with the fence layout before issuing a permit.
