Top Fencing Companies in Sedona, AZ, 86336 | Compare & Call
There are 32 fencing companies server in Sedona AZ
Bob's Welding & Steel Supply has been a fixture in Sedona since 1973, founded by Robert Davenport and now managed by his son, Jeff. The shop specializes in general metal fabrication and repair, with a...
John Wright Tree Services
John Wright Tree Services brings over 50 years of combined experience in landscape design, tree care, and fencing to Phoenix homeowners. Our team—including Rose Smith, Will Davis, Ramiro Romero, Rober...
Estimated Fencing Costs in Sedona, AZ
Q&A
What are the height and setback rules for a fence on my Sedona property?
Sedona zoning limits fences to 4 feet in front yards and 6 feet in rear yards. The setback is 0 feet, meaning you can build on the property line. However, corner lots adjacent to SR-89A require strict adherence to visibility 'sight triangles.' Any fence within this clear zone must be under 3 feet tall to maintain driver sightlines.
What fencing materials are suitable for Sedona's soil and termite risk?
With moderate soil corrosivity and termite risk, material compatibility is key. Pressure-treated wood must be rated for ground contact. All metal fasteners and hardware must be G90 galvanized minimum to prevent rust streaks that violate earth-tone mandates. In historic districts, composite or steel with approved finishes is often required.
What are my legal duties to my neighbor when replacing a shared fence in Sedona?
Arizona Revised Statutes 9-499.16, the 'Good Neighbor' fence law, governs shared boundaries. As of 2026, you must provide written notice to adjoining property owners before construction begins. This statute also outlines shared cost and maintenance responsibilities for partition fences, making prior agreement critical.
Why do fence posts in Sedona's Uptown neighborhood need footings below 12 inches?
A 12-inch frost line is established by the IRC. When posts are set above it, frost heave from trapped soil moisture can lift foundations, causing racking and failure. In Uptown's clay-heavy soil, proper concrete footings below this depth provide essential stability against seasonal ground movement.
How does Sedona's 105 MPH V-ult wind rating affect fence design?
The 105 MPH ultimate design wind speed (V-ult) is an engineering metric from ASCE 7-22 standards. It dictates structural requirements to survive peak storm season gusts. This rating forces specific post spacing, concrete footing mass, and bracket strength. A standard residential fence not engineered for this load will likely fail during a monsoon outflow event.
How soon can a fencing specialist start a project in Sedona?
After a signed agreement and permit approval, mobilization typically begins within 5-7 business days. For a consultation, a specialist based near the Tlaquepaque Arts Village can reach most Uptown properties via SR-89A within the 15-25 minute window noted for dispatch in the area.
What is the utility locate process before digging a fence line in Uptown?
You must contact Arizona 811 at least two full business days before excavation. They mark all public utility lines. Hitting an unmarked line in the dense Uptown neighborhood is a major liability for repair costs and service disruption. A professional installer will manage this ticket alongside the city permit office paperwork as a single process.
Do smart gates meet Sedona's pool safety and liability standards?
Yes. Integrated IoT gate systems with automatic self-closing latches and alarms can be configured to exceed Sedona City Code Chapter 15.05 and IRC Appendix AG requirements. These systems create an auditable access log, which is becoming a standard for managing liability under modern Arizona homeowner policies.