Top Fencing Companies in Seven Mile, AZ, 85926 | Compare & Call

There are 38 fencing companies server in Seven Mile AZ

Outlaw Fencing & Gates

Outlaw Fencing & Gates

Mesa AZ 85209
Fences & Gates

Outlaw Fencing & Gates has served Mesa, AZ, for 25 years, building barriers and trust under the same family ownership. Formerly known as WT Fencing, we continue a legacy of delivering custom iron fenc...

Top Shelf Welding

Top Shelf Welding

★★★★★ 5.0 / 5 (1)
Queen Creek AZ 85140
Metal Fabricators, Trailer Repair, Fences & Gates

Top Shelf Welding LLC is a 100% veteran-owned and operated metal fabrication, trailer repair, and fencing and gates company based in Queen Creek, AZ. We hold an ROC#338543 license and are fully bonded...

Red Beard Welding & Fabrication

Red Beard Welding & Fabrication

Mesa AZ 85207
Metal Fabricators, Fences & Gates, Decks & Railing

Red Beard Welding & Fabrication, based in Mesa, Arizona, is a licensed, bonded, and insured company (ROC 348256) offering comprehensive welding and fabrication solutions for both commercial and reside...

H Bell's power

H Bell's power

Mesa AZ 85210
Metal Fabricators, Fences & Gates

H Bell's Power provides expert metal fabrication and fencing services to homeowners in Mesa, AZ. Living in the East Valley, we understand how relentless wind can damage fence sections and how monsoon ...

Core Arc Contracting

Core Arc Contracting

Mesa AZ 85207
Metal Fabricators, Fences & Gates, Decks & Railing

Core Arc Contracting, based in Mesa, AZ, provides metalworking and general contracting services for commercial, civil, and residential projects. The company specializes in custom metal fabrication, de...

Iron earth contractors llc

Iron earth contractors llc

Phoenix AZ 85021
Excavation Services, Fences & Gates, Decks & Railing

Nick, owner of Ironearth Contractors LLC, brings over 10 years of heavy equipment experience to residential excavation and welding projects in Phoenix. Based near the Arcadia neighborhood, he speciali...

Andy Anderson's Landscaping

Andy Anderson's Landscaping

Florence AZ 85132
Landscaping, Fences & Gates, Patio Coverings

Andy Anderson's Landscaping has been serving Florence, AZ, and the surrounding areas with reliable landscaping, fence and gate services, and patio coverings. Located near the historic downtown Florenc...

Copper State Dock and Doors

Copper State Dock and Doors

Phoenix AZ 85003
Fences & Gates, Garage Door Services

Copper State Dock and Doors LLC, based in Phoenix, has over 10 years of experience providing dependable commercial and residential fencing and garage door services. We specialize in repairing sagging ...

Fireline Welding & Fabrication

Fireline Welding & Fabrication

Payson AZ 85541
Fences & Gates, Metal Fabricators, Trailer Repair

Fireline Welding & Fabrication is a family-owned business serving Payson and the surrounding Rim Country. Located just off Highway 260 near the Payson Airport, we provide custom metal fabrication, tra...

Faheys Home Services

Faheys Home Services

Lake Montezuma AZ 86335
Handyman, Fences & Gates, General Contractors

With over 25 years of experience in residential home building, remodeling, and maintenance, Faheys Home Services delivers reliable workmanship to homeowners in Lake Montezuma, Arizona. We take pride i...



Estimated Fencing Costs in Seven Mile, AZ

Emergency Fence/Gate RepairStorm / Security Response
$299 - $404
Wood Privacy Fence (Per LF)Estimated Range
$29 - $44
Vinyl / PVC Fencing (Per LF)Estimated Range
$39 - $59
Chain Link Installation (Per LF)Estimated Range
$14 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$44 - $64
Standard Driveway Gate InstallEstimated Range
$1,079 - $1,444

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Seven Mile. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Question Answers

What fencing materials hold up best against Seven Mile's moderate termite risk and soil corrosivity?

Moderate soil corrosivity demands hot-dip galvanized steel posts and brackets. Pressure-treated lumber must be rated for ground contact. Use stainless steel or triple-coated deck screws for all fasteners to prevent unsightly rust streaks. These material choices directly combat the two primary degradation factors in this area.

Why is a 12-inch footing depth mandatory for my Seven Mile fence posts?

The Seven Mile Residential District has a 12-inch frost line. The IRC requires footings to extend below this depth. Posts set above the frost line will heave upward during winter freezes, cracking concrete and warping panels. This is the leading cause of structural failure for fences in this neighborhood.

What are the height and placement rules for a fence on my corner lot?

Zoning limits are 3 feet in the front yard and 6 feet in the rear. The zero-foot setback allows building directly on the property line. Corner lots require a 'sight triangle'—a clear zone at the intersection. Any fence within 30 feet of the corner with AZ-87 must be under 3 feet tall to maintain driver visibility and comply with city safety codes.

What is the typical timeline for a consultation and project start in Seven Mile?

We schedule initial site consultations within 5-7 business days. The standard dispatch route is from the Seven Mile Community Park, east via AZ-87, into the residential district. This results in a consistent 35-45 minute travel window for the estimator to assess your site conditions and review all zoning and engineering requirements with you.

What is the required process before digging fence post holes?

You must contact Arizona 811 at least two full business days before excavation. They coordinate with all utilities to mark underground lines. Hitting a gas or fiber line in the Seven Mile district incurs major repair costs and liability. We manage all associated permit paperwork with the city office to ensure the project starts correctly.

Can I have a smart gate that also meets pool safety codes?

Yes. A self-closing, self-latching gate with a 54-inch release height is required by Arizona pool code. Modern IoT latch systems integrate with this mechanism. They provide remote access logging and automation while maintaining the physical safety standard. This dual compliance is now a baseline for managing homeowner liability in Arizona.

How does the 105 MPH V-ult wind rating affect my fence design?

A 105 MPH ultimate design wind speed (V-ult) is an engineering standard from ASCE 7-22. It dictates post spacing, concrete footing mass, and the required strength of post-to-rail brackets. Fences built to a lower standard will fail during the peak summer monsoon season, as panels act as sails and create catastrophic uplift forces.

What are my legal obligations to neighbors when building a fence on the property line?

Arizona Revised Statutes Section 33-401 is a 'good neighbor' law. For a fence on a shared boundary, you must provide written notice to the adjoining property owner at least 30 days before construction begins. Since the Seven Mile setback is zero feet, this notification is a strict 2026 requirement to avoid disputes and potential litigation.



Scroll to Top
CALL US NOW