Top Fencing Companies in Three Points, AZ, 85735 | Compare & Call
There are 139 fencing companies server in Three Points AZ
Anderson ornamental Iron
Anderson Ornamental Iron has been serving Tucson and Southern Arizona for over 30 years, specializing in custom ornamental ironwork, masonry, concrete, and fencing. As a general contractor and fence/g...
AGE Welder provides expert fence and gate services to homeowners and businesses in Tucson, AZ. We specialize in installation, repair, painting, staining, and weatherproofing for both manual and automa...
Since 1985, Quality Ornamental Iron has been a family-owned and operated business serving Tucson, Arizona. With over 30 years of experience, we specialize in custom wrought iron solutions for both res...
Montebello Metals LLC, owned by Lorenzo Montebello, is a metal fabrication company serving Oro Valley, AZ. Lorenzo’s passion began with a welding class and grew into a business dedicated to turning ra...
Cardinal Fence And Fabrication, LLC is a family-owned fencing company in Tucson, AZ, with over 45 years of combined experience. We specialize in installing and repairing chain link, wood, vinyl, wroug...
Johansen Fence & Gate has been Tucson’s custom metal fabrication specialist for 13 years, serving homeowners and businesses in Oro Valley, Marana, Catalina, Casas Adobes, and Tanque Verde. We design, ...
Antech Corporation
Antech Corporation has been a trusted provider of fencing, gates, and security systems in Tucson, Arizona since 1949. Operating from a 25,000-square-foot facility, the company is a licensed general co...
Since 2017, Ridpath Metal Craft has served Tucson, Arizona, as a custom metal fabrication shop. We focus on designing, fabricating, and installing custom fencing and gates for local homeowners and bus...
Triple S7v7n Hardscape Services is a Tucson-based contractor specializing in masonry, concrete, tree services, and fencing. For local homeowners near areas like the Catalina Foothills or downtown, we ...
STL Manufacturing serves Tucson homeowners and businesses with custom metal fabrication, fencing, and gate solutions. Based in Tucson, the company designs, fabricates, and installs a wide range of met...
Estimated Fencing Costs in Three Points, AZ
Q&A
What is Arizona's legal requirement for notifying a neighbor about a fence?
Arizona Revised Statutes 12-1201, the 'Good Neighbor Fence Law,' mandates written notice to adjoining landowners before replacing a shared partition fence. In Three Points, this 2026 requirement is strictly enforced. Provide plans and a proposed cost share at least 30 days prior to work.
What are the height and setback rules for a fence in Three Points, AZ?
Zoning limits are 3 feet in front yards and 6 feet in rear yards. The setback is 0 feet, allowing installation on the property line. For corner lots near AZ-86, you must maintain a clear 'sight triangle' at intersections. Obscuring driver visibility violates code and creates liability.
What fence materials work with Three Points' soil and termite risk?
Soil has a moderate corrosivity index. Use G90 galvanized steel posts and fasteners. Aluminum or steel components resist the moderate to heavy termite pressure. Untreated wood or inferior fasteners will rust, causing permanent stains on stucco and accelerating structural failure.
What is the typical timeline for a consultation and project start?
We dispatch from the Three Points Community Park area. Travel via AZ-86 results in a 45-60 minute response for a site consultation. After design and permit approval, crew mobilization typically occurs within 10-14 business days, depending on material lead times and the current labor schedule.
How does a 105 MPH V-ult wind rating change the fence design?
A 105 MPH V-ult wind speed is the ultimate design load per ASCE 7-22 standards. This dictates post spacing, concrete footing mass, and bracket strength. Standard 8-foot spacing often fails. We engineer for 6-foot centers or less to survive peak monsoon gusts in this region.
Can a smart gate meet pool safety codes in Pima County?
Yes. The Pima County Pool Barrier Code requires a self-closing, self-latching gate with a latch at 54 inches minimum. Modern IoT gate operators can integrate these mechanical features. The system must fail closed. This meets 2026 liability standards for Arizona homeowners with pools.
What is required before digging fence post holes?
Call Arizona 811 for utility locates at least two business days before excavation. Hitting a power or gas line in Three Points Central is a major financial and safety liability. We manage the permit paperwork with the county office concurrently. Never dig without both clearances.
Why must fence posts in Three Points Central be set below 12 inches?
The IRC and local code require footings below the frost line. A 12-inch frost depth in Three Points causes seasonal heave. Posts not set below this line will lift and fail during winter. This is a structural necessity, not a recommendation.
