Top Fencing Companies in Three Points, AZ, 85735 | Compare & Call
There are 139 fencing companies server in Three Points AZ
Ornamental Iron & Welding in Tucson, AZ is a family-run metal fabrication shop that has been serving local homeowners and businesses for years. We specialize in custom wrought iron work, including fen...
Top Design Metal Fab is a trusted metal fabrication company serving Tucson, AZ. Specializing in custom metal work, fences, and gates, they address common local fencing problems such as loose panels an...
Screwie's Wrought Iron in Tucson, AZ, was founded in 2013 by Luis Chavez, who brings over a decade of hands-on experience in welding, ornamental ironwork, and customer service. After his previous empl...
Perez Welding is a trusted provider of fence and gate services and metal fabrication in Tucson, AZ. We help local homeowners tackle common issues like fence expansion and contraction damage and hardwa...
Obraco, based in Tucson, Arizona, delivers expert metal fabrication and welding services for residential and industrial clients. Founded in 2023, the team of certified welders brings over 25 years of ...
RJ Ornamental Fabrication, based in Tucson, AZ, is a certified metal fabricator with 18 years of experience. The company specializes in security doors, metal fencing, rails, panels, trellises, and win...
Tucson Fence Builders, based in Tucson, AZ, is a fencing contractor that provides a comprehensive range of fencing solutions for both residential and commercial properties. Specializing in the install...
Metal Works Tucson is a trusted local metal fabrication and construction company serving Tucson, AZ. Specializing in deck construction, repair, and replacement, as well as custom metal fabrication for...
OG Enterprises, based in Casas Adobes, AZ, is your local expert for fences, gates, and metal fabrication. We tackle common neighborhood issues like wind-damaged fence sections and rusting ornamental i...
Zavala Iron provides custom metal fabrication and fence installation services for Tucson residents and businesses. Based in the Tucson area, near the Rillito River Park and the historic El Presidio ne...
Estimated Fencing Costs in Three Points, AZ
Q&A
What is Arizona's legal requirement for notifying a neighbor about a fence?
Arizona Revised Statutes 12-1201, the 'Good Neighbor Fence Law,' mandates written notice to adjoining landowners before replacing a shared partition fence. In Three Points, this 2026 requirement is strictly enforced. Provide plans and a proposed cost share at least 30 days prior to work.
What are the height and setback rules for a fence in Three Points, AZ?
Zoning limits are 3 feet in front yards and 6 feet in rear yards. The setback is 0 feet, allowing installation on the property line. For corner lots near AZ-86, you must maintain a clear 'sight triangle' at intersections. Obscuring driver visibility violates code and creates liability.
What fence materials work with Three Points' soil and termite risk?
Soil has a moderate corrosivity index. Use G90 galvanized steel posts and fasteners. Aluminum or steel components resist the moderate to heavy termite pressure. Untreated wood or inferior fasteners will rust, causing permanent stains on stucco and accelerating structural failure.
What is the typical timeline for a consultation and project start?
We dispatch from the Three Points Community Park area. Travel via AZ-86 results in a 45-60 minute response for a site consultation. After design and permit approval, crew mobilization typically occurs within 10-14 business days, depending on material lead times and the current labor schedule.
How does a 105 MPH V-ult wind rating change the fence design?
A 105 MPH V-ult wind speed is the ultimate design load per ASCE 7-22 standards. This dictates post spacing, concrete footing mass, and bracket strength. Standard 8-foot spacing often fails. We engineer for 6-foot centers or less to survive peak monsoon gusts in this region.
Can a smart gate meet pool safety codes in Pima County?
Yes. The Pima County Pool Barrier Code requires a self-closing, self-latching gate with a latch at 54 inches minimum. Modern IoT gate operators can integrate these mechanical features. The system must fail closed. This meets 2026 liability standards for Arizona homeowners with pools.
What is required before digging fence post holes?
Call Arizona 811 for utility locates at least two business days before excavation. Hitting a power or gas line in Three Points Central is a major financial and safety liability. We manage the permit paperwork with the county office concurrently. Never dig without both clearances.
Why must fence posts in Three Points Central be set below 12 inches?
The IRC and local code require footings below the frost line. A 12-inch frost depth in Three Points causes seasonal heave. Posts not set below this line will lift and fail during winter. This is a structural necessity, not a recommendation.
