Top Fencing Companies in Agoura, CA, 91301 | Compare & Call

There are 239 fencing companies server in Agoura CA

GnG Vinyl Fencing

GnG Vinyl Fencing

★★★★★ 4.7 / 5 (441)
445 W Colorado St, Glendale CA 91204
Fences & Gates, Patio Coverings

GnG Vinyl Fencing in Glendale, CA is a licensed vinyl fencing company that fabricates and installs durable, high-quality vinyl products. Operating from a 15,000 square foot facility in Los Angeles, th...

EZ Gates Service

EZ Gates Service

★★★★★ 4.8 / 5 (47)
Santa Clarita CA
Fences & Gates, Garage Door Services

EZ Gates Service, a licensed gate service company, has been serving Santa Clarita, the San Fernando Valley, and nearby areas since 2005. Under my management since 2005, we carry on my father’s legacy ...

Customize Vinyl Fencing

Customize Vinyl Fencing

★★★★★ 5.0 / 5 (91)
Northridge CA 91324
Fences & Gates, Patio Coverings, Decks & Railing

Customize Vinyl Fencing, based in Northridge, CA, specializes in vinyl fences, gates, railings, patio covers, and decks with over 20 years of certified experience. Our team handles everything from sma...

Land Eco Development

Land Eco Development

★★★★★ 5.0 / 5 (1)
Los Angeles CA 91609
General Contractors, Landscaping, Fences & Gates

Land Eco Development serves Los Angeles, CA as a full-service general contractor, landscaper, and fencing expert. They handle everything from bathroom remodeling and deck construction to complete land...

Finest Fence Company

Finest Fence Company

★★★★☆ 4.3 / 5 (73)
4525 Industrial St Ste 4m, Simi Valley CA 93063
Fences & Gates, Decks & Railing, Patio Coverings

Finest Fence Company has been serving Simi Valley, CA since 1992, providing custom fencing, gates, decks, and patio coverings for both residential and commercial clients. As a licensed and bonded cont...

LA Iron & Design

LA Iron & Design

Burbank CA 91506
Fences & Gates, Metal Fabricators

LA Iron & Design is a licensed C-23 metal fabrication contractor serving Burbank and the greater Los Angeles area. Based in Burbank, the company specializes in custom fences, gates, railings, balconie...

Titan Custom Built

Titan Custom Built

North Hollywood CA 91615
Interior Design, Fences & Gates, Metal Fabricators

Titan Custom Built has been serving North Hollywood and the surrounding San Fernando Valley with expert fence and gate solutions for over a decade. Located just minutes from the NoHo Arts District and...

OT Gates and Fence Repair

OT Gates and Fence Repair

★★★★★ 4.5 / 5 (50)
7955 Haskell Ave Ste 20, Van Nuys CA 91406
Garage Door Services, Fences & Gates, Metal Fabricators

OT Gates and Fence Repair is a licensed, family-run business serving Van Nuys and the San Fernando Valley for nearly a decade. We specialize in the installation, repair, and maintenance of driveway ga...

Next Level Garage Doors & Gates

Next Level Garage Doors & Gates

★★★★★ 5.0 / 5 (53)
Los Angeles CA 91340
Fences & Gates, Garage Door Services

Next Level Garage Doors & Gates serves Los Angeles homeowners with expert fence, gate, and garage door services. Based in the heart of the city, we are just minutes from landmarks like the Griffith Ob...

Welderchris

Welderchris

411 South Flower St, Burbank CA 91502
Metal Fabricators, Fences & Gates, Decks & Railing

Welderchris is a Burbank-based metal fabrication company with over 15 years of experience. What started as small repair work has grown into a full-service operation crafting custom gates, doors, raili...



Estimated Fencing Costs in Agoura, CA

Emergency Fence/Gate RepairStorm / Security Response
$359 - $484
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,294 - $1,729

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Agoura. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

What are the height and placement rules for a fence on my property?

Agoura zoning permits 3-foot heights in front yard setbacks and 6-foot heights in rear and side yards. The 0-foot setback allows installation directly on the property line. For corner lots, a clear 'sight triangle' must be maintained for traffic safety, especially near high-speed corridors like US-101.

How soon can a consultation for a new fence project begin?

We dispatch a project manager from our office near Agoura Hills City Hall. The route via US-101 typically allows for a site consultation in Old Agoura within the 35-45 minute window. We schedule assessments to review engineering, zoning, and logistics in a single visit.

Why are fence posts in Old Agoura prone to heaving and failure?

The 12-inch frost line depth mandates footings set below this level to resist frost heave forces. Posts set in shallow concrete above the frost line will lift during freeze-thaw cycles, causing structural failure. We design to IRC Section R403 for frost-protected footings to ensure perimeter stability.

Is a standard fence design sufficient for Agoura Hills wind loads?

No. A 110 MPH V-ult wind speed rating per ASCE 7-22 standards governs design. This 'ultimate' wind speed dictates reduced post spacing, deeper footings, and the use of tension-rated brackets to resist overturning. Standard 8-foot panel spans often fail during peak storm season gusts without this engineering.

What are my legal obligations before replacing a shared fence in Agoura?

California Civil Code 841 requires written notice to adjoining owners 30 days prior to construction on a shared boundary. For Agoura projects in 2026, this notice must include material specifications and a proposed cost-sharing agreement. Failure to provide proper notice can result in legal disputes and cost liability.

How does Agoura's environment affect fence material selection?

Moderate to heavy termite risk and a moderate soil corrosivity index dictate material compatibility. Pressure-treated lumber must be rated for ground contact. We specify hot-dip galvanized or stainless-steel fasteners to prevent rust streaks from corroding in the soil, which is a common failure point.

What is the critical first step before any digging for a fence?

Call 811, the Underground Service Alert of Southern California, at least two business days before excavation. Hitting a gas, electric, or fiber line in Old Agoura creates major liability, service disruptions, and fines. We manage this ticket and coordinate all required permits with the Agoura Hills City Hall permit office.

How can a smart gate system meet modern safety and code requirements?

Integrated IoT gate systems with automatic latches can be configured to meet ASTM F1908-08 pool barrier standards, a requirement under CA Health and Safety Code 115922. This integration provides remote monitoring and ensures the gate self-closes and self-latches, addressing liability concerns for California homeowners.



Scroll to Top
CALL US NOW