Top Fencing Companies in Alhambra, CA, 91801 | Compare & Call

There are 229 fencing companies server in Alhambra CA

DNA Gates & Fences

DNA Gates & Fences

★★★★☆ 4.2 / 5 (5)
11490 Burbank Blvd Ste 4D, North Hollywood CA 91601
Fences & Gates

Avi, owner of DNA Gates & Fences in North Hollywood, CA, started the company in 2024 to offer homeowners a higher-quality alternative to standard bolt-together gate kits. Specializing in fully welded ...

HandyMaestro

HandyMaestro

★★★★★ 4.9 / 5 (136)
832 S Ynez Ave, Monterey Park CA 91754
Fences & Gates, Decks & Railing

Founded in 2019 by Dmitrii, HandyMaestro is a licensed fence and gate contractor serving Monterey Park and the greater Los Angeles area. With over 16 years of hands-on construction experience and a ba...

Iron Men Gates & Doors Design

Iron Men Gates & Doors Design

★★★★★ 4.6 / 5 (111)
Los Angeles CA 90036
Fences & Gates, Garage Door Services, Metal Fabricators

Iron Men Gates & Doors Design is a family-owned business serving the Greater Los Angeles area with over 15 years of experience. We specialize in custom ironwork, including the installation and repair ...

Flores Artscape

Flores Artscape

★★★★★ 4.5 / 5 (428)
3959 Eagle Rock Blvd, Los Angeles CA 90065
Landscaping, Masonry/Concrete, Fences & Gates

Flores Artscape, established in 2004 by husband-and-wife team Rumaldo and Miriam Flores, brings over 25 years of landscape industry experience to Los Angeles. As a licensed landscape contractor, the c...

T.J. Julka Construction

T.J. Julka Construction

★★★★★ 5.0 / 5 (6)
San Fernando Valley CA 91601
Fences & Gates, Patio Coverings, Decks & Railing

T.J. Julka Construction, licensed under California license #1104821, is a San Fernando Valley-based architectural wood structure company specializing in custom fences, gates, decks, railings, pergolas...

EZ Gates Service

EZ Gates Service

★★★★★ 4.8 / 5 (47)
Santa Clarita CA
Fences & Gates, Garage Door Services

EZ Gates Service, a licensed gate service company, has been serving Santa Clarita, the San Fernando Valley, and nearby areas since 2005. Under my management since 2005, we carry on my father’s legacy ...

Land Eco Development

Land Eco Development

★★★★★ 5.0 / 5 (1)
Los Angeles CA 91609
General Contractors, Landscaping, Fences & Gates

Land Eco Development serves Los Angeles, CA as a full-service general contractor, landscaper, and fencing expert. They handle everything from bathroom remodeling and deck construction to complete land...

Forgeways

Forgeways

★★★★★ 4.7 / 5 (46)
1911 N San Fernando Rd, Los Angeles CA 90065
Metal Fabricators, Fences & Gates

FORGEWAYS, a Los Angeles metal fabrication company with roots dating back to Robertos Wrought Iron, rebranded to continue a family tradition of craftsmanship. Founded in 2018, we specialize in custom ...

MB Fence & Iron Works

MB Fence & Iron Works

★★★★★ 4.7 / 5 (42)
834 Hyde Ave, Pomona CA 91767
Fences & Gates

MB Fence & Iron Works is a family-owned business serving Pomona and the surrounding area since 1980. The current owner grew up in the trade, taking over from his father after decades of hands-on exper...

LA Iron & Design

LA Iron & Design

Burbank CA 91506
Fences & Gates, Metal Fabricators

LA Iron & Design is a licensed C-23 metal fabrication contractor serving Burbank and the greater Los Angeles area. Based in Burbank, the company specializes in custom fences, gates, railings, balconie...



Estimated Fencing Costs in Alhambra, CA

Emergency Fence/Gate RepairStorm / Security Response
$359 - $484
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,294 - $1,729

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Alhambra. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

What fencing materials work best with Alhambra's soil and pest conditions?

Material compatibility is critical. The moderate soil corrosivity index requires G90 galvanized steel fasteners and posts to prevent rust streaks on stucco. Given the moderate to heavy termite risk, avoid wood posts in direct ground contact. Use pressure-treated lumber rated for ground contact or switch to steel posts with concrete footings. Composite or vinyl panels are low-maintenance alternatives but must be properly anchored for the 95 MPH wind load.

What are the height and setback rules for a fence on my property?

Alhambra zoning limits fences to 3.5 feet in front yard setbacks and 6 feet in rear and side yards. A 0-foot setback is allowed on the property line, but corner lots require special attention. Visibility 'sight triangles' for traffic safety must be maintained, especially for properties with access points near I-10, where local code may mandate lower, non-opaque fencing within 10 feet of the intersection.

How does Alhambra's wind rating affect my fence design?

The 95 MPH V-ult wind speed, per ASCE 7-22 standards, dictates structural design. This rating requires closer post spacing (often 6 feet on-center maximum for solid panels), deeper concrete footings, and wind-rated brackets. A fence in Alhambra Park must withstand peak storm season gusts channeled from the I-10 corridor, making a standard 8-foot post spacing and cheap hardware a predictable failure point.

How soon can a structural consultation be scheduled?

Initial consultations are typically scheduled within 3-5 business days. Our route from Alhambra City Hall via the I-10 corridor to the Alhambra Park neighborhood allows for a consistent 35-45 minute response window. We confirm the site address, review preliminary zoning constraints, and block a 90-minute on-site assessment to evaluate footing conditions, wind exposure, and boundary lines.

Can a smart gate system meet California's pool safety requirements?

Yes, when integrated correctly. The gate hardware must first comply with ASTM F2286, featuring a self-closing, self-latching mechanism with the release located at least 54 inches above grade. A smart IoT lock can then be added, but it must not override the primary mechanical latch. This dual-system approach meets modern liability standards for Alhambra homeowners by ensuring physical compliance while adding remote monitoring.

What is required before digging fence post holes?

You must contact DigAlert by calling 811 at least two working days before excavation. This free service locates underground utility lines. Hitting a gas, water, or fiber line in Alhambra Park is a major liability, leading to service disruptions, fines, and repair costs. A professional installer manages this ticket and concurrently submits any required paperwork to the Alhambra Permit Office to ensure the project is both safe and permitted.

How deep do fence posts need to be in Alhambra Park to prevent failure?

Posts require a minimum 12-inch footing below grade, per the IRC frost line depth. In Alhambra Park, soil moisture from irrigated landscaping can cause frost heave, lifting posts set above this line and destabilizing the entire structure. A 24-inch minimum embedment is standard for a 6-foot fence to provide lateral stability against wind loads.

Am I legally required to notify my neighbor before building a fence on the property line?

Yes. Under California Civil Code 841, you must provide a 30-day written notice to any adjoining neighbor before starting construction or replacement of a shared 'partition fence' on the property line. This 2026 requirement is mandatory in Alhambra and includes details on the project scope, timeline, and your proposed cost share for the boundary section.



Scroll to Top
CALL US NOW