Top Fencing Companies in Alhambra, CA, 91801 | Compare & Call

There are 229 fencing companies server in Alhambra CA

DC Iron & Metal Designs

DC Iron & Metal Designs

★★★★☆ 4.0 / 5 (4)
Pacoima CA 91331
Fences & Gates, Decks & Railing

DC Iron & Metal Designs is a family-owned metalworking company based in Pacoima, CA, serving the San Fernando Valley since 2001. We specialize in custom metal gates, fences, decks, railings, and weldi...

Five Star Fence

Five Star Fence

★★★★☆ 3.9 / 5 (77)
13477 Louvre St, Pacoima CA 91331
Fences & Gates

Five Star Fence, established in 1985, has provided fence and gate solutions to homeowners across the Los Angeles area for over 35 years. We serve Pacoima, West Los Angeles, Santa Monica, Malibu, Holly...

Gate Repair Altadena

Gate Repair Altadena

★★★★★ 4.6 / 5 (39)
2650 Lake Ave, Altadena CA 91001
Fences & Gates

SOS Gate Repair Altadena is a licensed gate and fence service provider serving Altadena, CA, and the surrounding areas. We specialize in both residential and commercial projects, offering installation...

Montes Ornamental Iron Works

Montes Ornamental Iron Works

★★★★★ 4.8 / 5 (22)
Chino Hills CA 91709
Fences & Gates

Montes Ornamental Iron Works is a family-owned business in Chino Hills, CA, serving the community since 2001. With over 25 years of experience, we specialize in hand-crafted custom iron work for fence...

KAAN Ironcraft

KAAN Ironcraft

Glendale CA 91205
Fences & Gates, Metal Fabricators, Framing

KAAN Ironcraft, based in Glendale, CA, specializes in custom metal fabrication, welding, and the installation of modern gates, fences, and outdoor kitchen frames. The company provides a full range of ...

Affordable Fencing Company

Affordable Fencing Company

★★★★☆ 4.2 / 5 (24)
1141 Pomona Rd Unit D, Corona CA 92882
Fences & Gates, Patio Coverings

Since 1984, Affordable Fencing Company has been installing durable fences, gates, patio covers, arbors, and gazebos for homeowners, HOAs, and commercial clients in Corona and throughout Southern Calif...

Wood Fence Expert

Wood Fence Expert

★★★★☆ 4.0 / 5 (40)
Los Angeles CA 90039
Fences & Gates

Wood Fence Expert in Los Angeles, CA has been building wood fences and gates since 2008, but owner's experience dates back to the 1980s. After a detour into a different career, he left a sales job he ...

Mex Iron Artwork

Mex Iron Artwork

★★★★★ 4.9 / 5 (62)
9023 Rosecrest Ln Ste 1, Fontana CA 92335
Fences & Gates, Decks & Railing

Mex Iron Artwork is a custom ironwork business founded by Gustavo, known as Gus, in 1998. Starting in Venice, California, the company originally focused on handcrafted wrought iron furniture before mo...

Irvine Fence

Irvine Fence

★★★★★ 4.8 / 5 (571)
1016 E Katella Ave, Anaheim CA 92805
Fences & Gates, Patio Coverings

Irvine Fence Inc., established in 2010, is a licensed fencing contractor serving Anaheim, CA. What began with a single truck and a commitment to affordable, reliable vinyl fencing has grown into a ful...

Mike's Synthetic Grass

Mike's Synthetic Grass

★★★★★ 5.0 / 5 (21)
Long Beach CA 90805
Artificial Turf, Masonry/Concrete, Fences & Gates

Mike's Synthetic Grass in Long Beach, CA, specializes in transforming outdoor spaces with synthetic grass for both residential and commercial properties. Beyond turf installation, the company offers a...



Estimated Fencing Costs in Alhambra, CA

Emergency Fence/Gate RepairStorm / Security Response
$359 - $484
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,294 - $1,729

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Alhambra. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

What fencing materials work best with Alhambra's soil and pest conditions?

Material compatibility is critical. The moderate soil corrosivity index requires G90 galvanized steel fasteners and posts to prevent rust streaks on stucco. Given the moderate to heavy termite risk, avoid wood posts in direct ground contact. Use pressure-treated lumber rated for ground contact or switch to steel posts with concrete footings. Composite or vinyl panels are low-maintenance alternatives but must be properly anchored for the 95 MPH wind load.

What are the height and setback rules for a fence on my property?

Alhambra zoning limits fences to 3.5 feet in front yard setbacks and 6 feet in rear and side yards. A 0-foot setback is allowed on the property line, but corner lots require special attention. Visibility 'sight triangles' for traffic safety must be maintained, especially for properties with access points near I-10, where local code may mandate lower, non-opaque fencing within 10 feet of the intersection.

How does Alhambra's wind rating affect my fence design?

The 95 MPH V-ult wind speed, per ASCE 7-22 standards, dictates structural design. This rating requires closer post spacing (often 6 feet on-center maximum for solid panels), deeper concrete footings, and wind-rated brackets. A fence in Alhambra Park must withstand peak storm season gusts channeled from the I-10 corridor, making a standard 8-foot post spacing and cheap hardware a predictable failure point.

How soon can a structural consultation be scheduled?

Initial consultations are typically scheduled within 3-5 business days. Our route from Alhambra City Hall via the I-10 corridor to the Alhambra Park neighborhood allows for a consistent 35-45 minute response window. We confirm the site address, review preliminary zoning constraints, and block a 90-minute on-site assessment to evaluate footing conditions, wind exposure, and boundary lines.

Can a smart gate system meet California's pool safety requirements?

Yes, when integrated correctly. The gate hardware must first comply with ASTM F2286, featuring a self-closing, self-latching mechanism with the release located at least 54 inches above grade. A smart IoT lock can then be added, but it must not override the primary mechanical latch. This dual-system approach meets modern liability standards for Alhambra homeowners by ensuring physical compliance while adding remote monitoring.

What is required before digging fence post holes?

You must contact DigAlert by calling 811 at least two working days before excavation. This free service locates underground utility lines. Hitting a gas, water, or fiber line in Alhambra Park is a major liability, leading to service disruptions, fines, and repair costs. A professional installer manages this ticket and concurrently submits any required paperwork to the Alhambra Permit Office to ensure the project is both safe and permitted.

How deep do fence posts need to be in Alhambra Park to prevent failure?

Posts require a minimum 12-inch footing below grade, per the IRC frost line depth. In Alhambra Park, soil moisture from irrigated landscaping can cause frost heave, lifting posts set above this line and destabilizing the entire structure. A 24-inch minimum embedment is standard for a 6-foot fence to provide lateral stability against wind loads.

Am I legally required to notify my neighbor before building a fence on the property line?

Yes. Under California Civil Code 841, you must provide a 30-day written notice to any adjoining neighbor before starting construction or replacement of a shared 'partition fence' on the property line. This 2026 requirement is mandatory in Alhambra and includes details on the project scope, timeline, and your proposed cost share for the boundary section.



Scroll to Top
CALL US NOW