Top Fencing Companies in Alhambra, CA, 91801 | Compare & Call

There are 229 fencing companies server in Alhambra CA

FM Iron Works

FM Iron Works

★★★★☆ 4.4 / 5 (32)
9539 Rush St, South El Monte CA 91733
Metal Fabricators, Fences & Gates

Established in 2018, FM Iron Works is a South El Monte metal fabrication shop specializing in custom wrought iron fences, gates, security doors, window guards, and access control products. Owner Franc...

B & B Lock and Security

B & B Lock and Security

★★★★★ 4.6 / 5 (207)
1916 W Valley Blvd, Alhambra CA 91803
Keys & Locksmiths, Fences & Gates, Garage Door Services

B & B Lock and Security has been a trusted name in Alhambra for over 30 years, providing comprehensive locksmith, fence, gate, and garage door services to residential and commercial clients. Located n...

Garage Door Springs Diagnostics

Garage Door Springs Diagnostics

215 N Marengo Ave, Pasadena CA 91101
Garage Door Services, Fences & Gates

Garage Door Springs Diagnostics is a family-owned garage door and fencing company serving Pasadena, CA, since 2014. Founded by two brothers, the business brings over a decade of hands-on experience to...

American Welding, Fabrication, and Dockworks

American Welding, Fabrication, and Dockworks

★★★★★ 5.0 / 5 (1)
2984 1st St Ste G, La Verne CA 91750
Door Sales/Installation, Fences & Gates

American Welding, Fabrication, and Dockworks in La Verne, CA, is a licensed and insured company with over 20 years of experience in door sales/installation, fences, and gates. We provide comprehensive...

Eagle Mex Iron Works

Eagle Mex Iron Works

Montclair CA 91763
Fences & Gates, Metal Fabricators

Eagle Mex Iron Works has served Montclair and Southern California for over two decades, specializing in custom wrought iron fabrication for both residential and commercial clients. Based in Montclair,...

Ayala Builders & Contractors

Ayala Builders & Contractors

★★★★★ 5.0 / 5 (1)
City of Industry CA 91744
Fences & Gates, General Contractors

Ayala Builders & Contractors, located in City of Industry, CA, specializes in fence and gate services. The company addresses common local problems like fence discoloration and wood fence warping from ...

Hawklink Fences

Hawklink Fences

4859 Telegraph Rd, East Los Angeles CA 90022
Fences & Gates, Decks & Railing

Serving East Los Angeles and surrounding areas, HawkLink Fences specializes in fence and gate installation, repair, and custom fabrication. We work with cable railing, iron, chain-link, aluminum, and ...

Lock Up

Lock Up

★★★★☆ 4.3 / 5 (6)
171 N Altadena Dr, Pasadena CA 91107
Fences & Gates, Security Systems, Keys & Locksmiths

The Lock-Up Inc., led by founder Frank Khonsari, has been a trusted security specialist in the San Gabriel Valley for over 20 years. With a background in aerospace engineering, Frank brings technical ...

Clearway Garage Doors & Gates

Clearway Garage Doors & Gates

155 N Lake Ave Ste 864, Pasadena CA 91101
Garage Door Services

Clearway Garage Doors & Gates, founded by Avi in Pasadena, CA, delivers honest, professional garage door and gate services without the usual headaches. With years of field experience and a focus on tr...

MMT Welding

MMT Welding

★★★★☆ 4.2 / 5 (31)
Los Angeles CA 91423
Fences & Gates, Handyman

Based in Los Angeles, MMT Welding has been serving local homeowners and businesses since 2015. Founded by a certified welder, the company offers a full range of metal and vinyl fence and gate installa...



Estimated Fencing Costs in Alhambra, CA

Emergency Fence/Gate RepairStorm / Security Response
$359 - $484
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,294 - $1,729

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Alhambra. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

What fencing materials work best with Alhambra's soil and pest conditions?

Material compatibility is critical. The moderate soil corrosivity index requires G90 galvanized steel fasteners and posts to prevent rust streaks on stucco. Given the moderate to heavy termite risk, avoid wood posts in direct ground contact. Use pressure-treated lumber rated for ground contact or switch to steel posts with concrete footings. Composite or vinyl panels are low-maintenance alternatives but must be properly anchored for the 95 MPH wind load.

What are the height and setback rules for a fence on my property?

Alhambra zoning limits fences to 3.5 feet in front yard setbacks and 6 feet in rear and side yards. A 0-foot setback is allowed on the property line, but corner lots require special attention. Visibility 'sight triangles' for traffic safety must be maintained, especially for properties with access points near I-10, where local code may mandate lower, non-opaque fencing within 10 feet of the intersection.

How does Alhambra's wind rating affect my fence design?

The 95 MPH V-ult wind speed, per ASCE 7-22 standards, dictates structural design. This rating requires closer post spacing (often 6 feet on-center maximum for solid panels), deeper concrete footings, and wind-rated brackets. A fence in Alhambra Park must withstand peak storm season gusts channeled from the I-10 corridor, making a standard 8-foot post spacing and cheap hardware a predictable failure point.

How soon can a structural consultation be scheduled?

Initial consultations are typically scheduled within 3-5 business days. Our route from Alhambra City Hall via the I-10 corridor to the Alhambra Park neighborhood allows for a consistent 35-45 minute response window. We confirm the site address, review preliminary zoning constraints, and block a 90-minute on-site assessment to evaluate footing conditions, wind exposure, and boundary lines.

Can a smart gate system meet California's pool safety requirements?

Yes, when integrated correctly. The gate hardware must first comply with ASTM F2286, featuring a self-closing, self-latching mechanism with the release located at least 54 inches above grade. A smart IoT lock can then be added, but it must not override the primary mechanical latch. This dual-system approach meets modern liability standards for Alhambra homeowners by ensuring physical compliance while adding remote monitoring.

What is required before digging fence post holes?

You must contact DigAlert by calling 811 at least two working days before excavation. This free service locates underground utility lines. Hitting a gas, water, or fiber line in Alhambra Park is a major liability, leading to service disruptions, fines, and repair costs. A professional installer manages this ticket and concurrently submits any required paperwork to the Alhambra Permit Office to ensure the project is both safe and permitted.

How deep do fence posts need to be in Alhambra Park to prevent failure?

Posts require a minimum 12-inch footing below grade, per the IRC frost line depth. In Alhambra Park, soil moisture from irrigated landscaping can cause frost heave, lifting posts set above this line and destabilizing the entire structure. A 24-inch minimum embedment is standard for a 6-foot fence to provide lateral stability against wind loads.

Am I legally required to notify my neighbor before building a fence on the property line?

Yes. Under California Civil Code 841, you must provide a 30-day written notice to any adjoining neighbor before starting construction or replacement of a shared 'partition fence' on the property line. This 2026 requirement is mandatory in Alhambra and includes details on the project scope, timeline, and your proposed cost share for the boundary section.



Scroll to Top
CALL US NOW