Top Fencing Companies in Alhambra, CA, 91801 | Compare & Call

There are 229 fencing companies server in Alhambra CA

Choice Fence Company

Choice Fence Company

★★★☆☆ 3.0 / 5 (2)
424 Baltimore Ave Ste B, Monterey Park CA 91754
Fences & Gates

Choice Fence Company is the result of a lifelong passion for craftsmanship. Owner Bob started building fences at age 16 in New England and, now at 63, still personally supervises every job. With over ...

Fensco Services

Fensco Services

5040 Calmview, Baldwin Park CA 91760
Fences & Gates

Fensco Services, founded in 2006, brings over a decade of experience to the fencing industry in Baldwin Park, CA. The company specializes in cost-effective chain link fence services for industrial, co...

Wolf Pack Welding

Wolf Pack Welding

Alhambra CA 91803
Fences & Gates, Metal Fabricators

Wolf Pack Welding is a father-and-son metal fabrication and fencing company serving Alhambra, CA, and the surrounding San Gabriel Valley. With over nine years of experience, they specialize in custom ...

Mission Fence

Mission Fence

★★★★☆ 3.5 / 5 (37)
8464 Garvey Ave, Rosemead CA 91770
Building Supplies, Fences & Gates, Masonry/Concrete

Mission Fence & Patio Builders, established in 1964, is a licensed general building contractor serving Rosemead, the San Gabriel Valley, and the Los Angeles area. We specialize in designing and instal...

LA Fence

LA Fence

★★★★☆ 3.7 / 5 (3)
Los Angeles CA 90033
Fences & Gates

LA Fence provides professional and affordable fencing services across Greater Los Angeles and Beverly Hills, including neighborhoods near the Santa Monica Pier, Griffith Observatory, and Silver Lake. ...

Precision Fence

Precision Fence

★★★★★ 5.0 / 5 (1)
2025 Broderick Ave, Duarte CA 91010
Fences & Gates

Precision Fence is a family-operated fencing company serving Duarte and Southern California for over 25 years. We specialize in the fabrication and installation of chain link, iron, wood, vinyl, and c...

Soto and Sons Garage Door Services

Soto and Sons Garage Door Services

★★★★★ 4.8 / 5 (24)
South El Monte CA 91733
Garage Door Services, Fences & Gates

Hello, I'm Pablo, owner of Soto and Sons Garage Door Services, a family business serving South El Monte since 1986. We specialize in garage door repair, replacement, and installation for both resident...

Jpr Welding

Jpr Welding

★★★★★ 5.0 / 5 (3)
9734 Klingerman St, South El Monte CA 91733
Metal Fabricators, Fences & Gates

Jpr Welding in South El Monte, CA provides custom metal fabrication for wrought iron gates, stairways, rails, balconies, and security doors. Serving residential, commercial, and industrial clients acr...

A-1 Steel Fence

A-1 Steel Fence

2210 Chico Ave, South El Monte CA 91733
Fences & Gates

A-1 Steel Fence Co., Inc. has been a trusted fencing contractor in South El Monte, CA, for over 60 years, serving Southern California homeowners, general contractors, and government agencies. We speci...

GPS Iron Works

GPS Iron Works

★☆☆☆☆ 1.0 / 5 (2)
10719 Rush St S, South El Monte CA 91733
Fences & Gates

GPS Iron Works, based in South El Monte, CA, specializes in repairing and installing fences and gates. Local homeowners often face fencing problems like broken gate hardware and earthquake damage. GPS...



Estimated Fencing Costs in Alhambra, CA

Emergency Fence/Gate RepairStorm / Security Response
$359 - $484
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,294 - $1,729

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Alhambra. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

What fencing materials work best with Alhambra's soil and pest conditions?

Material compatibility is critical. The moderate soil corrosivity index requires G90 galvanized steel fasteners and posts to prevent rust streaks on stucco. Given the moderate to heavy termite risk, avoid wood posts in direct ground contact. Use pressure-treated lumber rated for ground contact or switch to steel posts with concrete footings. Composite or vinyl panels are low-maintenance alternatives but must be properly anchored for the 95 MPH wind load.

What are the height and setback rules for a fence on my property?

Alhambra zoning limits fences to 3.5 feet in front yard setbacks and 6 feet in rear and side yards. A 0-foot setback is allowed on the property line, but corner lots require special attention. Visibility 'sight triangles' for traffic safety must be maintained, especially for properties with access points near I-10, where local code may mandate lower, non-opaque fencing within 10 feet of the intersection.

How does Alhambra's wind rating affect my fence design?

The 95 MPH V-ult wind speed, per ASCE 7-22 standards, dictates structural design. This rating requires closer post spacing (often 6 feet on-center maximum for solid panels), deeper concrete footings, and wind-rated brackets. A fence in Alhambra Park must withstand peak storm season gusts channeled from the I-10 corridor, making a standard 8-foot post spacing and cheap hardware a predictable failure point.

How soon can a structural consultation be scheduled?

Initial consultations are typically scheduled within 3-5 business days. Our route from Alhambra City Hall via the I-10 corridor to the Alhambra Park neighborhood allows for a consistent 35-45 minute response window. We confirm the site address, review preliminary zoning constraints, and block a 90-minute on-site assessment to evaluate footing conditions, wind exposure, and boundary lines.

Can a smart gate system meet California's pool safety requirements?

Yes, when integrated correctly. The gate hardware must first comply with ASTM F2286, featuring a self-closing, self-latching mechanism with the release located at least 54 inches above grade. A smart IoT lock can then be added, but it must not override the primary mechanical latch. This dual-system approach meets modern liability standards for Alhambra homeowners by ensuring physical compliance while adding remote monitoring.

What is required before digging fence post holes?

You must contact DigAlert by calling 811 at least two working days before excavation. This free service locates underground utility lines. Hitting a gas, water, or fiber line in Alhambra Park is a major liability, leading to service disruptions, fines, and repair costs. A professional installer manages this ticket and concurrently submits any required paperwork to the Alhambra Permit Office to ensure the project is both safe and permitted.

How deep do fence posts need to be in Alhambra Park to prevent failure?

Posts require a minimum 12-inch footing below grade, per the IRC frost line depth. In Alhambra Park, soil moisture from irrigated landscaping can cause frost heave, lifting posts set above this line and destabilizing the entire structure. A 24-inch minimum embedment is standard for a 6-foot fence to provide lateral stability against wind loads.

Am I legally required to notify my neighbor before building a fence on the property line?

Yes. Under California Civil Code 841, you must provide a 30-day written notice to any adjoining neighbor before starting construction or replacement of a shared 'partition fence' on the property line. This 2026 requirement is mandatory in Alhambra and includes details on the project scope, timeline, and your proposed cost share for the boundary section.



Scroll to Top
CALL US NOW