Top Fencing Companies in Alhambra, CA, 91801 | Compare & Call

There are 229 fencing companies server in Alhambra CA

Barrientos Iron Work

Barrientos Iron Work

★★★★★ 5.0 / 5 (13)
1433 West G St, los Angeles CA 90744
Fences & Gates, Metal Fabricators

For over 15 years, Barrientos Iron Work has served Los Angeles with custom metal and wood fabrication. We specialize in building and repairing fences, gates, and ornamental ironwork, treating each pro...

Isaac's Ironworks

Isaac's Ironworks

★★★★☆ 4.4 / 5 (132)
11336 Goss Ave, Sun Valley CA 91352
Fences & Gates, Decks & Railing

Isaac's Ironworks has been a family-owned business in Sun Valley since 1989, fabricating custom iron and steel products for residential and commercial clients. We specialize in fences, gates, decks, r...

Kind Garage Doors & Gates

Kind Garage Doors & Gates

★★★★★ 5.0 / 5 (141)
Los Angeles CA 90025
Garage Door Services, Fences & Gates

KIND Garage Doors & Gates is a family-owned business founded in 2010 in Los Angeles, CA, with a mission to raise standards in the garage door and gate industry. Built on precision workmanship and hone...

Solorzano Fence Company

Solorzano Fence Company

★★★★★ 5.0 / 5 (33)
Pasadena CA 91101
Fences & Gates

Solorzano Fence Company is a licensed fencing contractor serving Pasadena, CA, and the surrounding areas. We specialize in custom fence and gate installations and repairs for both residential and comm...

JCR Iron Works

JCR Iron Works

★★★★★ 4.6 / 5 (48)
los angeles CA 90047
Door Sales/Installation, Metal Fabricators, Fences & Gates

JCR Iron Works, a family-owned business based in Los Angeles, CA, was founded in 2019 after I decided to leave my previous welding company and take a leap of faith to run my own operation. What drives...

Coastline Gate Repair

Coastline Gate Repair

★★★★★ 4.5 / 5 (51)
Marina del Rey CA 90292
Fences & Gates

Coastline Gate Repair, owned by Tiffani, is a woman-led gate repair and installation company serving Marina del Rey, Santa Monica, Long Beach, and the Los Angeles area. Specializing in automatic and e...

EM Garage Doors And Gate Service

EM Garage Doors And Gate Service

★★★★★ 4.9 / 5 (274)
19629 Cantara St, Reseda CA 91335
Garage Door Services, Fences & Gates

Edi, the owner of EM Garage Doors And Gate Service, brings five years of hands-on experience from working with three different companies in the garage and gate industry. Based in Reseda, CA, his famil...

HA In CA Fencing

HA In CA Fencing

★★★★★ 5.0 / 5 (38)
Glendale CA 91206
Fences & Gates, Patio Coverings

HA in CA Fencing, based in Glendale, is a licensed contractor with over 25 years of construction experience, including 10 years working for other companies before obtaining a contractor license last y...

Paul's Iron Works

Paul's Iron Works

★★★★★ 5.0 / 5 (7)
8819 Garvey Ave Ste A8, Rosemead CA 91770
Fences & Gates, Decks & Railing, Metal Fabricators

At Paul's Iron Works in Rosemead, CA, we carry forward a 38-year legacy of custom metal fabrication. Under new management by partners Randy and Bobby, we specialize in crafting custom-designed iron wo...

Celtic Nature Landscape Design

Celtic Nature Landscape Design

★★★★★ 5.0 / 5 (45)
Los Angeles CA 91604
Landscaping, Landscape Architects or Designers, Fences & Gates

Celtic Nature Landscape Design, based in Los Angeles, CA, specializes in creating elevated, drought-tolerant landscapes that merge sustainable practices with timeless design. Our boutique services off...



Estimated Fencing Costs in Alhambra, CA

Emergency Fence/Gate RepairStorm / Security Response
$359 - $484
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,294 - $1,729

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Alhambra. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

What fencing materials work best with Alhambra's soil and pest conditions?

Material compatibility is critical. The moderate soil corrosivity index requires G90 galvanized steel fasteners and posts to prevent rust streaks on stucco. Given the moderate to heavy termite risk, avoid wood posts in direct ground contact. Use pressure-treated lumber rated for ground contact or switch to steel posts with concrete footings. Composite or vinyl panels are low-maintenance alternatives but must be properly anchored for the 95 MPH wind load.

What are the height and setback rules for a fence on my property?

Alhambra zoning limits fences to 3.5 feet in front yard setbacks and 6 feet in rear and side yards. A 0-foot setback is allowed on the property line, but corner lots require special attention. Visibility 'sight triangles' for traffic safety must be maintained, especially for properties with access points near I-10, where local code may mandate lower, non-opaque fencing within 10 feet of the intersection.

How does Alhambra's wind rating affect my fence design?

The 95 MPH V-ult wind speed, per ASCE 7-22 standards, dictates structural design. This rating requires closer post spacing (often 6 feet on-center maximum for solid panels), deeper concrete footings, and wind-rated brackets. A fence in Alhambra Park must withstand peak storm season gusts channeled from the I-10 corridor, making a standard 8-foot post spacing and cheap hardware a predictable failure point.

How soon can a structural consultation be scheduled?

Initial consultations are typically scheduled within 3-5 business days. Our route from Alhambra City Hall via the I-10 corridor to the Alhambra Park neighborhood allows for a consistent 35-45 minute response window. We confirm the site address, review preliminary zoning constraints, and block a 90-minute on-site assessment to evaluate footing conditions, wind exposure, and boundary lines.

Can a smart gate system meet California's pool safety requirements?

Yes, when integrated correctly. The gate hardware must first comply with ASTM F2286, featuring a self-closing, self-latching mechanism with the release located at least 54 inches above grade. A smart IoT lock can then be added, but it must not override the primary mechanical latch. This dual-system approach meets modern liability standards for Alhambra homeowners by ensuring physical compliance while adding remote monitoring.

What is required before digging fence post holes?

You must contact DigAlert by calling 811 at least two working days before excavation. This free service locates underground utility lines. Hitting a gas, water, or fiber line in Alhambra Park is a major liability, leading to service disruptions, fines, and repair costs. A professional installer manages this ticket and concurrently submits any required paperwork to the Alhambra Permit Office to ensure the project is both safe and permitted.

How deep do fence posts need to be in Alhambra Park to prevent failure?

Posts require a minimum 12-inch footing below grade, per the IRC frost line depth. In Alhambra Park, soil moisture from irrigated landscaping can cause frost heave, lifting posts set above this line and destabilizing the entire structure. A 24-inch minimum embedment is standard for a 6-foot fence to provide lateral stability against wind loads.

Am I legally required to notify my neighbor before building a fence on the property line?

Yes. Under California Civil Code 841, you must provide a 30-day written notice to any adjoining neighbor before starting construction or replacement of a shared 'partition fence' on the property line. This 2026 requirement is mandatory in Alhambra and includes details on the project scope, timeline, and your proposed cost share for the boundary section.



Scroll to Top
CALL US NOW