Top Fencing Companies in Alhambra, CA, 91801 | Compare & Call

There are 229 fencing companies server in Alhambra CA

Kyung Shin Iron Works

Kyung Shin Iron Works

★★★★☆ 4.4 / 5 (40)
269 S Western Ave Ste 240, Los Angeles CA 90004
Metal Fabricators, Garage Door Services, Fences & Gates

Kyung Shin Iron Works is a family-owned and operated business in Los Angeles, CA, with over 20 years of experience in metal fabrication, garage door services, and fence and gate solutions. We speciali...

Good Neighbor Fencing

Good Neighbor Fencing

★★★★☆ 4.2 / 5 (84)
Los Angeles CA 90066
Fences & Gates, Decks & Railing

Good Neighbor Fencing in Los Angeles specializes in deck, pergola, and fence construction, blending craftsmanship with local expertise. From traditional wooden fences to modern horizontal designs, and...

PrimeLine Fence & Gates

PrimeLine Fence & Gates

★★★★★ 5.0 / 5 (11)
4730 Valley Blvd. Unit F, Los Angeles CA 90032
Fences & Gates, Patio Coverings

PrimeLine Fence & Gates serves Los Angeles homeowners and businesses with practical, reliable fencing and gate solutions. From vinyl privacy fences to automatic gate systems, the team handles installa...

YourDeckBuilder

YourDeckBuilder

★★★★★ 4.8 / 5 (61)
Burbank CA 91506
Decks & Railing, Fences & Gates, Patio Coverings

YourDeckBuilder is a veteran-owned general contracting company based in Burbank, CA, specializing in decks, railing, fences, gates, and patio coverings. Founded by Army Combat Veteran Matt Thompson, t...

Vinyl Fence Depot

Vinyl Fence Depot

★★★★★ 4.5 / 5 (263)
14700 Oxnard St, Van Nuys CA 91411
Fences & Gates, Patio Coverings

Vinyl Fence Depot, a family-owned business in Van Nuys, CA, has been manufacturing, fabricating, and installing vinyl fencing products for over 16 years. They specialize exclusively in vinyl structure...

Metal Design Works

Metal Design Works

★★★★★ 4.7 / 5 (14)
9705 Factorial Way, South El Monte CA 91733
Metal Fabricators, Fences & Gates

Metal Design Works, a minority woman-owned metal fabrication company founded in 1989, serves South El Monte and the surrounding San Gabriel Valley. We specialize in custom metal fencing, gates, benche...

JRC Wrought Iron

JRC Wrought Iron

★★★★☆ 4.4 / 5 (180)
8724 Garvey Ave, Rosemead CA 91770
Fences & Gates, Metal Fabricators

JRC Wrought Iron has been serving Rosemead and the greater Los Angeles area since 1974. Founded by Jose R. Cortez and now led by Rene Cortez, we are a licensed contractor specializing in custom wrough...

CalVet Fence

CalVet Fence

★★★★★ 4.8 / 5 (139)
Brea CA 92821
Fences & Gates

Alvaro founded CalVet Fence in Brea, CA, drawing on 30+ years of combined experience in the fencing industry. As one of the early pioneers of vinyl fencing, he brings a construction background from hi...

LA Welding & Repair

LA Welding & Repair

★★★★★ 4.8 / 5 (34)
651 Clover St, Los Angeles CA 90031
Fences & Gates, Metal Fabricators

LA Welding & Repair is a trusted provider of fence and gate services and metal fabrication in Los Angeles, CA. Located near the Arts District and serving neighborhoods from Echo Park to Boyle Heights,...

Smartwood

Smartwood

★★★★★ 5.0 / 5 (5)
848 W 168th St, Gardena CA 90247
Fences & Gates, Decks & Railing, Siding

Smartwood is a Gardena-based general contracting company with nearly 25 years of experience in building decks, fences, gates, and siding. We started as custom furniture craftsmen and evolved into spec...



Estimated Fencing Costs in Alhambra, CA

Emergency Fence/Gate RepairStorm / Security Response
$359 - $484
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,294 - $1,729

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Alhambra. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

What fencing materials work best with Alhambra's soil and pest conditions?

Material compatibility is critical. The moderate soil corrosivity index requires G90 galvanized steel fasteners and posts to prevent rust streaks on stucco. Given the moderate to heavy termite risk, avoid wood posts in direct ground contact. Use pressure-treated lumber rated for ground contact or switch to steel posts with concrete footings. Composite or vinyl panels are low-maintenance alternatives but must be properly anchored for the 95 MPH wind load.

What are the height and setback rules for a fence on my property?

Alhambra zoning limits fences to 3.5 feet in front yard setbacks and 6 feet in rear and side yards. A 0-foot setback is allowed on the property line, but corner lots require special attention. Visibility 'sight triangles' for traffic safety must be maintained, especially for properties with access points near I-10, where local code may mandate lower, non-opaque fencing within 10 feet of the intersection.

How does Alhambra's wind rating affect my fence design?

The 95 MPH V-ult wind speed, per ASCE 7-22 standards, dictates structural design. This rating requires closer post spacing (often 6 feet on-center maximum for solid panels), deeper concrete footings, and wind-rated brackets. A fence in Alhambra Park must withstand peak storm season gusts channeled from the I-10 corridor, making a standard 8-foot post spacing and cheap hardware a predictable failure point.

How soon can a structural consultation be scheduled?

Initial consultations are typically scheduled within 3-5 business days. Our route from Alhambra City Hall via the I-10 corridor to the Alhambra Park neighborhood allows for a consistent 35-45 minute response window. We confirm the site address, review preliminary zoning constraints, and block a 90-minute on-site assessment to evaluate footing conditions, wind exposure, and boundary lines.

Can a smart gate system meet California's pool safety requirements?

Yes, when integrated correctly. The gate hardware must first comply with ASTM F2286, featuring a self-closing, self-latching mechanism with the release located at least 54 inches above grade. A smart IoT lock can then be added, but it must not override the primary mechanical latch. This dual-system approach meets modern liability standards for Alhambra homeowners by ensuring physical compliance while adding remote monitoring.

What is required before digging fence post holes?

You must contact DigAlert by calling 811 at least two working days before excavation. This free service locates underground utility lines. Hitting a gas, water, or fiber line in Alhambra Park is a major liability, leading to service disruptions, fines, and repair costs. A professional installer manages this ticket and concurrently submits any required paperwork to the Alhambra Permit Office to ensure the project is both safe and permitted.

How deep do fence posts need to be in Alhambra Park to prevent failure?

Posts require a minimum 12-inch footing below grade, per the IRC frost line depth. In Alhambra Park, soil moisture from irrigated landscaping can cause frost heave, lifting posts set above this line and destabilizing the entire structure. A 24-inch minimum embedment is standard for a 6-foot fence to provide lateral stability against wind loads.

Am I legally required to notify my neighbor before building a fence on the property line?

Yes. Under California Civil Code 841, you must provide a 30-day written notice to any adjoining neighbor before starting construction or replacement of a shared 'partition fence' on the property line. This 2026 requirement is mandatory in Alhambra and includes details on the project scope, timeline, and your proposed cost share for the boundary section.



Scroll to Top
CALL US NOW