Top Fencing Companies in Alhambra, CA, 91801 | Compare & Call

There are 229 fencing companies server in Alhambra CA

Garcis Welding Shop

Garcis Welding Shop

★★★★☆ 4.4 / 5 (7)
7515 S Central Ave, Los Angeles CA 90001
Metal Fabricators, Fences & Gates

Garcis Welding Shop, based in Los Angeles, specializes in metal fabrication, fence and gate services, and welding repairs for both residential and commercial clients. From custom automatic gates to st...

National Deck & Stair

National Deck & Stair

★★★★☆ 3.8 / 5 (44)
2770 E Slauson Ave, Huntington Park CA 90255
Decks & Railing, Waterproofing, Fences & Gates

National Deck & Stair, a family-owned and operated Los Angeles company, has served Huntington Park and the surrounding areas for nearly 20 years. We specialize in waterproof deck and stair coatings, o...

Fence Guys

Fence Guys

★★★★☆ 4.2 / 5 (13)
3314 Kelburn Ave, Rosemead CA 91770
Fences & Gates

Fence Guys in Rosemead, CA is a licensed fencing contractor owned by Jerson. The company focuses on delivering an exceptional experience from start to finish, with customer satisfaction as the top pri...

LA Fence Craft

LA Fence Craft

★★★★★ 4.5 / 5 (209)
2088 Central Ave Ste D, Duarte CA 91010
Fences & Gates, Patio Coverings, Decks & Railing

LA Fence Craft, based in Duarte, CA, is a licensed and bonded fencing company serving residential and commercial clients since 2016. We specialize in custom fencing solutions using vinyl, wood, and al...

SPC Garage Doors

SPC Garage Doors

★★★★★ 5.0 / 5 (9)
Los Angeles CA 90028
Garage Door Services, Fences & Gates

SPC Garage Doors, founded by brothers Tyler and Owen, is a family-owned business serving Los Angeles, CA. With a focus on professionalism and quality workmanship, we specialize in expert garage door i...

E & E Custom Iron Works

E & E Custom Iron Works

★★★★★ 4.7 / 5 (104)
15150 Valley Blvd Ste B, La Puente CA 91746
Fences & Gates

E & E Custom Iron Works is a family-owned business in La Puente, CA, with over 15 years of experience in wrought iron gates, handrails, motorized gates, and custom metal fabrication. Operating from a ...

Cali Fence

Cali Fence

★★★★☆ 4.4 / 5 (148)
6562 Caliente Rd Ste 101-190, Oak Hills CA 92344
Fences & Gates

Cali Fence, a licensed fencing company established in 2008, brings over 25 years of industry experience to Oak Hills and surrounding areas. Based in Riverside, we serve Orange County, the High Desert,...

United Iron Works

United Iron Works

★★★★★ 4.6 / 5 (54)
13748 Desmont St, Pacoima CA 91331
Fences & Gates, Metal Fabricators, Decks & Railing

United Iron Works, established in 2008 in Pacoima, CA, is a metal fabrication company specializing in custom wood gates, wrought iron designs, spiral stairs, and metal handrails. We also offer guardra...

Matthew Fitzgerald Welding

Matthew Fitzgerald Welding

★★★★★ 5.0 / 5 (4)
Kagel Canyon CA 91342
Fences & Gates, Metal Fabricators

Matthew Fitzgerald Welding provides durable, secure, and visually appealing metal solutions to residents and businesses in Kagel Canyon, CA. Specializing in custom fencing, gate installation, and gene...

Joes Arc Welding

Joes Arc Welding

★★★★★ 5.0 / 5 (28)
El Monte CA 91734
Metal Fabricators, Fences & Gates

Joe's Arc Welding is a licensed welding service based in El Monte, CA, specializing in iron gates, security gates, and gate motors for both residential and commercial properties. As a small, owner-ope...



Estimated Fencing Costs in Alhambra, CA

Emergency Fence/Gate RepairStorm / Security Response
$359 - $484
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,294 - $1,729

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Alhambra. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

What fencing materials work best with Alhambra's soil and pest conditions?

Material compatibility is critical. The moderate soil corrosivity index requires G90 galvanized steel fasteners and posts to prevent rust streaks on stucco. Given the moderate to heavy termite risk, avoid wood posts in direct ground contact. Use pressure-treated lumber rated for ground contact or switch to steel posts with concrete footings. Composite or vinyl panels are low-maintenance alternatives but must be properly anchored for the 95 MPH wind load.

What are the height and setback rules for a fence on my property?

Alhambra zoning limits fences to 3.5 feet in front yard setbacks and 6 feet in rear and side yards. A 0-foot setback is allowed on the property line, but corner lots require special attention. Visibility 'sight triangles' for traffic safety must be maintained, especially for properties with access points near I-10, where local code may mandate lower, non-opaque fencing within 10 feet of the intersection.

How does Alhambra's wind rating affect my fence design?

The 95 MPH V-ult wind speed, per ASCE 7-22 standards, dictates structural design. This rating requires closer post spacing (often 6 feet on-center maximum for solid panels), deeper concrete footings, and wind-rated brackets. A fence in Alhambra Park must withstand peak storm season gusts channeled from the I-10 corridor, making a standard 8-foot post spacing and cheap hardware a predictable failure point.

How soon can a structural consultation be scheduled?

Initial consultations are typically scheduled within 3-5 business days. Our route from Alhambra City Hall via the I-10 corridor to the Alhambra Park neighborhood allows for a consistent 35-45 minute response window. We confirm the site address, review preliminary zoning constraints, and block a 90-minute on-site assessment to evaluate footing conditions, wind exposure, and boundary lines.

Can a smart gate system meet California's pool safety requirements?

Yes, when integrated correctly. The gate hardware must first comply with ASTM F2286, featuring a self-closing, self-latching mechanism with the release located at least 54 inches above grade. A smart IoT lock can then be added, but it must not override the primary mechanical latch. This dual-system approach meets modern liability standards for Alhambra homeowners by ensuring physical compliance while adding remote monitoring.

What is required before digging fence post holes?

You must contact DigAlert by calling 811 at least two working days before excavation. This free service locates underground utility lines. Hitting a gas, water, or fiber line in Alhambra Park is a major liability, leading to service disruptions, fines, and repair costs. A professional installer manages this ticket and concurrently submits any required paperwork to the Alhambra Permit Office to ensure the project is both safe and permitted.

How deep do fence posts need to be in Alhambra Park to prevent failure?

Posts require a minimum 12-inch footing below grade, per the IRC frost line depth. In Alhambra Park, soil moisture from irrigated landscaping can cause frost heave, lifting posts set above this line and destabilizing the entire structure. A 24-inch minimum embedment is standard for a 6-foot fence to provide lateral stability against wind loads.

Am I legally required to notify my neighbor before building a fence on the property line?

Yes. Under California Civil Code 841, you must provide a 30-day written notice to any adjoining neighbor before starting construction or replacement of a shared 'partition fence' on the property line. This 2026 requirement is mandatory in Alhambra and includes details on the project scope, timeline, and your proposed cost share for the boundary section.



Scroll to Top
CALL US NOW