Top Fencing Companies in August, CA, 95205 | Compare & Call

There are 235 fencing companies server in August CA

Tioga Lumber And Fence

Tioga Lumber And Fence

★★☆☆☆ 1.6 / 5 (13)
4718 Greenleaf Ct, Modesto CA 95356
Fences & Gates, Decks & Railing, Patio Coverings

Tioga Lumber and Fencing has been serving Modesto and the surrounding areas since 1983, offering over 152 years of combined employee experience in fencing, decking, patio covers, arbors, and retaining...

Harris Wallace Construction

Harris Wallace Construction

★★★★★ 5.0 / 5 (2)
Escalon CA 95320
General Contractors, Masonry/Concrete, Fences & Gates

Harris Wallace Construction in Escalon, CA, is a team of licensed, insured, and bonded general contractors offering a full range of residential and commercial services. We specialize in concrete work,...

Pinedas General Remodeling

Pinedas General Remodeling

Modesto CA 95351
General Contractors, Fences & Gates, Gutter Services

Pinedas General Remodeling is a family-owned business serving Modesto, CA, with dependable home improvement services. Our team specializes in general remodeling, including kitchen, bathroom, bedroom, ...

Golden Standards Landscaping

Golden Standards Landscaping

Modesto CA 95358
Landscaping, Masonry/Concrete, Fences & Gates

Golden Standards Landscaping serves Modesto, CA, offering complete landscape, masonry, and fencing services. We handle projects large and small, from driveway installation and retaining walls to tree ...

Absolute Stone Pavers

Absolute Stone Pavers

★★★★★ 5.0 / 5 (3)
Manteca CA 95336
Masonry/Concrete, Artificial Turf, Fences & Gates

Absolute Stone Pavers in Manteca, CA specializes in outdoor living transformations. The company provides masonry, concrete, artificial turf, and fence and gate services. Over the years, outdoor spaces...

Apex Construction Innovations

Apex Construction Innovations

★★★★★ 4.6 / 5 (9)
Turlock CA 95380
General Contractors, Fences & Gates, Decks & Railing

Apex Construction Innovations is a licensed general contractor headquartered in Turlock, CA, serving the entire state of California. We specialize in home remodels and additions, including kitchen and...

United Powder Coating

United Powder Coating

★★★★★ 5.0 / 5 (1)
5491 W F St, Tracy CA 95304
Powder Coating, Sandblasting, Fences & Gates

United Powder Coating, based in Tracy, CA, offers expert powder coating and sandblasting services to local homeowners and businesses. Located near the Tracy Hills area and just off I-205, the company ...

luxury custom homes

luxury custom homes

960 S Union Rd, Manteca CA 95337
Fences & Gates

Luxury Custom Homes in Manteca, CA, specializes in high-end fence and gate solutions tailored to the area's unique challenges. We address common local issues like privacy fence panel damage from wind ...

All Steel Fence

All Steel Fence

★★★☆☆ 3.0 / 5 (4)
146 Klo Rd, Lathrop CA 95330
Fences & Gates

Since 1979, All Steel Fence, Inc. has provided commercial and industrial fencing solutions to Lathrop and the greater Stockton area. As a licensed California contractor and State Certified Small Busin...

SoCal Contracting Services

SoCal Contracting Services

★★★★★ 5.0 / 5 (2)
3012 Moore Rd, Ceres CA 95307
General Contractors, Fences & Gates

SoCal Contracting Services is a Ceres-based general contractor with over a decade of experience serving both residential and commercial clients across Southern California. Founded on hands-on work in ...



Estimated Fencing Costs in August, CA

Emergency Fence/Gate RepairStorm / Security Response
$384 - $519
Wood Privacy Fence (Per LF)Estimated Range
$34 - $54
Vinyl / PVC Fencing (Per LF)Estimated Range
$49 - $74
Chain Link Installation (Per LF)Estimated Range
$24 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$59 - $84
Standard Driveway Gate InstallEstimated Range
$1,379 - $1,844

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for August. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Question Answers

How does a 110 MPH V-ult wind load rating change the fence design?

A 110 MPH V-ult (Ultimate Design Wind Speed) is an engineering parameter from ASCE 7-22. It dictates the fence's required structural capacity. This rating forces closer post spacing (often 6 feet on-center, not 8), deeper concrete footings, and the use of hurricane-rated brackets. In the peak storm season, standard residential fences not engineered for this load will fail in the gusts common near CA-99.

Why is a 12-inch frost line depth critical for fence post footings in Downtown August?

The 12-inch frost line depth is a structural minimum, not a suggestion. In Downtown August, the ground freezes and thaws annually. Posts set above this line will be lifted by frost heave, causing structural failure and permanent misalignment. The 2018 IRC (Section R403) mandates footings extend below the frost line to prevent this. We engineer all perimeter footings to 18 inches for a safety factor.

What are the height and setback rules for a fence on my property line?

August zoning limits are 3 feet in front yards and 6 feet in rear yards. The 0-foot setback permits installation directly on the property line. Corner lots have critical 'sight triangle' regulations. Fences within 30 feet of the intersection of CA-99 and any street cannot exceed 3 feet to maintain driver visibility. The city enforces this for traffic safety.

How do termite risk and soil corrosivity dictate fence material choice?

Downtown August has moderate to heavy termite risk and moderate soil corrosivity. These factors are material-specific. Pressure-treated pine must be rated for ground contact (UC4A) and have a borate treatment for termites. All metal posts and fasteners require a G90 galvanized coating or better. We use stainless steel screws for hardware to prevent rust streaks on wood and vinyl.

What are the 2026 legal requirements for replacing a shared fence with my neighbor?

California Civil Code 841, the state's 'good neighbor' fence law, requires written notice 30 days before work on a shared boundary. In August, this includes a 'Good Neighbor Fence' pamphlet from the city clerk's office. The 2026 amendment clarifies that shared cost estimates must be itemized. Failure to provide proper notice can void your right to recover half the costs.

What is the typical timeline and route for a consultation in Downtown August?

We schedule consultations within 3-5 business days. Our standard route from August City Hall is south on CA-99, with a typical travel time of 25-35 minutes to most Downtown properties. The consultation includes a site survey, wind exposure assessment, and a review of ARB guidelines if applicable. A formal quote and engineering summary follow within 48 hours.

What is the utility locate process, and who handles the permit?

Calling 811 (Underground Service Alert of Northern California) is a non-negotiable first step. They mark public utility lines. Hitting a gas or fiber line in Downtown August carries major financial liability and service disruption. Our crew then hand-digs within 24 inches of any mark. We manage all permit paperwork with the August Permit Office, including ARB approval forms for the historic district.

Can a smart gate system meet California pool safety codes?

Yes, but integration is key. California Health & Safety Code 115922 requires pool barriers to be at least 60 inches high with self-closing, self-latching gates. A smart gate's IoT latch must be certified to ASTM F1908-16 for strength and durability. We specify commercial-grade actuators that automatically engage the latch, creating a code-compliant, access-controlled perimeter.



Scroll to Top
CALL US NOW