Top Fencing Companies in Boronda, CA, 93907 | Compare & Call

There are 11 fencing companies server in Boronda CA

Iron By Chad

Iron By Chad

30005 Olivia Dr, Greenfield CA 93927
General Contractors, Metal Fabricators, Fences & Gates

Iron By Chad is a full-service metal fabrication company based in Greenfield, CA, serving the Central Coast from the Bay Area to San Luis Obispo County. Founded in Alaska with 24 years of experience, ...

« Previous PagePage 2 of 2Next »


Estimated Fencing Costs in Boronda, CA

Emergency Fence/Gate RepairStorm / Security Response
$359 - $489
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,299 - $1,734

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Boronda. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Q&A

How deep must fence posts be set in Boronda?

Posts require a minimum 12-inch concrete footing extending below the local frost line. In Boronda Central, soil moisture from winter rains can cause frost heave. Posts set in shallower footings will shift and fail. IRC Section R403.1.4 mandates this depth to ensure structural stability against seasonal ground movement.

How is a fence designed to withstand high winds in this area?

The design is governed by a V-ult wind speed of 105 mph per ASCE 7-22 standards. This engineering rating dictates post spacing, concrete footing size, and the required strength of post-to-rail brackets. A fence not engineered for this load will fail during peak storm season gusts, which are common given Boronda's exposure from the Salinas Valley.

What are the height and setback rules for a fence on my property?

County zoning limits fences to 3 feet in front yards and 6 feet in rear yards, with a 0-foot setback allowing installation directly on the property line. For corner lots, a clear 'sight triangle' is required at intersections to maintain driver visibility. This is critical for properties near US-101 access roads to prevent traffic hazards.

What are the neighbor notification rules for a boundary fence in California?

California Civil Code 841 governs 'good neighbor' fences. The 2026 standard requires written notice to adjacent property owners 30 days before replacing a shared partition fence in Boronda. This notice must include a description of the project, proposed materials, and a cost estimate. Failure to provide notice can result in liability for the full cost.

What is required before digging fence post holes?

State law requires calling 811 (Underground Service Alert of Northern California) at least two working days before digging. They mark all public utility lines. Hitting an unmarked line in Boronda Central, such as fiber optic or gas, creates major repair liabilities and fines. We manage all associated Monterey County permit office paperwork for this process.

What fencing materials are suitable for Boronda's soil and pest conditions?

Moderate soil corrosivity and termite risk dictate material compatibility. Use pressure-treated lumber rated for ground contact or composite materials. All fasteners and hardware must be G90 galvanized steel or stainless steel to prevent rust streaks. Untreated steel or non-rated fasteners will corrode, compromising fence integrity within a few seasons.

What is the typical timeline and route for a consultation?

We schedule consultations within 48 hours. For Boronda Central, our route originates near the Boronda Adobe History Center, proceeds east via Russell Road, and connects to US-101 for direct access. This logistics plan ensures a consistent 15-25 minute response window for site assessments and project scoping.

Do automated gates meet pool safety and modern security standards?

Yes. A self-closing, self-latching gate meeting ASTM F1908-08 (54 inches minimum latch height) is required for pools. Integrating a smart-gate IoT system with this mechanical latch provides remote access logs and failsafe closure, satisfying both California's safety code and 2026 liability standards for monitored property access.



Scroll to Top
CALL US NOW