Top Fencing Companies in Burbank, CA, 91501 | Compare & Call

A 110 MPH ultimate design wind speed (V-ult) per ASCE 7-22 dictates structural capacity. This requires closer post spacing (often 6 feet on-center), welded or through-bolted corner brackets, and concrete footings sized for overturning moments. Standard pre-fabricated panels often fail in peak storm season gusts without this engineering.

The 12-inch frost line depth prevents frost heave. Posts not set below this line will shift during winter, causing fence failure. IRC Table R301.2(1) mandates this for Burbank's climate zone. A 36-inch-deep footing is standard for 6-foot posts to resist overturning.

Moderate to heavy termite risk rules out untreated wood in ground contact. Use steel posts with a G90 galvanized or powder-coated finish for moderate soil corrosivity. Aluminum or composite materials are also suitable. Stainless steel fasteners prevent rust streaks that degrade appearance and protection.

Yes. Integrated IoT gate operators can be programmed to meet ASTM F1908-08. The system must self-close and self-latch, with the latch mechanism placed at 54 inches minimum height. Modern systems log access, providing a digital record that strengthens liability defense for California homeowners.

California Civil Code 841 requires written notice to adjoining owners 30 days prior to construction on a shared boundary. As of 2026, this notice must include material specifications and a proposed cost-sharing agreement. Failure to comply forfeits your right to recover half the cost.

Burbank zoning allows a 3.5-foot front fence and a 6-foot rear fence with a 0-foot setback. For corner lots, a 15-foot sight triangle from the property line must remain clear for driver visibility, especially near high-traffic corridors like I-5. This is a non-negotiable safety regulation.

A site consultation can typically be scheduled within 48 hours. Our route from the Burbank Town Center via the I-5 freeway allows for a consistent 25-35 minute response window to the Magnolia Park neighborhood, barring major traffic incidents.

You must contact DigAlert (811) at least two working days before excavation. Hitting a utility line in Magnolia Park incurs major repair costs and liability. The service provides a ticket number, which is required for your Burbank building permit application. The permit office will not issue approval without it.