Top Fencing Companies in Desert View Highlands, CA, 93551 | Compare & Call

There are 240 fencing companies server in Desert View Highlands CA

Bold Fabrication construction

Bold Fabrication construction

★★★★☆ 4.3 / 5 (13)
Irvine CA 92606
Metal Fabricators, Decks & Railing, Fences & Gates

Bold Fabrication Construction is a family-owned metal fabricating specialist based in Irvine, CA, with 17 years of experience in architectural, ornamental, and structural iron work. Serving neighborho...

Doma Structures

Doma Structures

★★★★★ 5.0 / 5 (2)
Irvine CA 92612
Fences & Gates, Patio Coverings

Doma Structures provides homeowners and businesses in Irvine, CA, with premium outdoor solutions that combine modern design with lasting durability. The company specializes in two innovative product l...

Woodland Builders

Woodland Builders

★★★★★ 5.0 / 5 (13)
147 W Rte 66 Ste 440, Glendora CA 91740
General Contractors, Fences & Gates, Patio Coverings

Woodland Builders is a licensed, bonded, and insured general contractor serving Glendora, CA, and surrounding areas across Orange, Los Angeles, San Bernardino, and Riverside counties. Founded by Matt,...

GM General Services

GM General Services

★★★★★ 4.9 / 5 (772)
Los Angeles CA 90011
Junk Removal & Hauling, Fences & Gates, Demolition Services

GM General Services Inc., founded by Gerardo M. in 2012, is a licensed general services company based in Los Angeles. After a car accident left him paralyzed at 25, Gerardo turned his experience worki...

K Metal Work & Design

K Metal Work & Design

★★★★★ 5.0 / 5 (13)
Downey CA 90241
Metal Fabricators, Fences & Gates, Patio Coverings

K Metal Work & Design in Downey, CA, is a family-owned metal fabrication business that has been honing its craft across three generations. What started in a small shop has evolved into a full-service ...

Steve's Mobile Welding

Steve's Mobile Welding

★★★★★ 5.0 / 5 (18)
La Mirada CA 90638
Metal Fabricators, Trailer Repair, Fences & Gates

Steve's Mobile Welding, based in La Mirada, CA, is a certified welding service offering on-site steel welding, fabrication, and repair. With an L.A. City License for Structural welding, Steve handles ...

Handy As Hec

Handy As Hec

★★★★★ 5.0 / 5 (4)
Pasadena CA 91104
Fences & Gates

Handy As Hec, based in Pasadena, CA, specializes in privacy toppers and in-ground horizontal board fencing. With over two years of solo experience, owner Hector provides affordable, high-quality fence...

Express Ironworks

Express Ironworks

★★★★★ 5.0 / 5 (7)
Los Angeles CA 90059
Fences & Gates, Metal Fabricators, Decks & Railing

Express Ironworks is a Los Angeles-based team of certified welders specializing in structural steel fabrication, installation, and repair. Serving both residential and commercial clients across Los An...

J Gonzalez Iron Works LLC

J Gonzalez Iron Works LLC

★★★☆☆ 3.1 / 5 (7)
1550 W 139th St Ste A, Gardena CA 90249
Fences & Gates, Metal Fabricators

J Gonzalez Iron Works LLC is a family-owned business in Gardena, CA, providing quality fabrication and long-lasting fences and gates since 1996. With decades of experience, we prioritize customer sati...

R&C Vinyl Fencing

R&C Vinyl Fencing

South Gate CA 90280
Fences & Gates

R&C Vinyl Fencing, based in South Gate, CA, provides a full range of fence and gate services to local homeowners and businesses. From installing new vinyl, wood, or metal fences to repairing and weath...



Estimated Fencing Costs in Desert View Highlands, CA

Emergency Fence/Gate RepairStorm / Security Response
$359 - $484
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,294 - $1,729

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Desert View Highlands. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Questions and Answers

Is a standard fence strong enough for the wind here?

No. The design wind speed for our area is 105 MPH V-ult. This engineering metric dictates the required structural capacity. Standard 8-foot post spacing often fails. We specify 6-foot centers, use embedded post bases, and grade-specific tension brackets to meet ASCE 7-22 standards, ensuring the fence survives peak storm season gusts.

Why do fence posts need to be set so deep in Desert View Highlands?

The 12-inch frost line depth is the critical factor. When soil freezes, it expands upward in a process called frost heave. Any post footing set above this line will be lifted, cracking foundations and warping the entire fence. Per IRC Section R403.1.4, footings must extend a minimum of 12 inches below the undisturbed ground surface to prevent this structural failure.

What are the legal steps for replacing a shared fence in Desert View Highlands?

California Civil Code 841 governs partition fences. The 2026 standard requires written notice to the adjoining neighbor at least 30 days before work begins on a shared boundary line. This notice must include a description of the planned fence, proposed costs, and a good-faith offer to discuss. Failure to provide this notice can result in liability for damages and removal costs.

How soon can a consultation be scheduled?

We typically dispatch a specialist within 48 hours. The standard route is from the Desert View Highlands County Park, proceeding via CA-14 for direct access. Given current traffic patterns, expect a 35-45 minute travel window for an on-site consultation to assess your specific property lines and structural requirements.

What is required before digging fence post holes?

You must contact DigAlert (811) at least two working days before excavation. They mark all public underground utilities. Hitting an unmarked line in Desert View Highlands can cause major service disruptions and create significant liability for repair costs and fines. We manage the permit paperwork with the local office to ensure the plot plan and engineering details are approved.

What are the height and setback rules for fences in Desert View Highlands?

Zoning limits are 3.5 feet in the front yard and 6 feet in the rear, with a 0-foot setback, meaning you can build directly on the property line. For corner lots, a 'sight triangle' regulation applies. No obstruction over 3 feet high is permitted within 10 feet of the property corner to maintain driver visibility, especially critical for lots near the high-speed CA-14.

Can I integrate a smart gate with my pool fence for better security?

Yes. Modern IoT-integrated gate systems with automatic self-closing and self-latching mechanisms are now the standard. They provide audit trails and remote status checks, which directly support compliance with California's 60-inch pool barrier code. This integration reduces liability by creating a verifiable record of secure operation.

How do local soil and pests influence my fence material choice?

Desert View Highlands has moderate soil corrosivity and termite risk. Incompatible materials will fail. Use pressure-treated wood rated for ground contact or corrosion-resistant metals like aluminum. All fasteners must be hot-dip galvanized or stainless steel to prevent rust streaks from staining the finish, which is a common complaint here.



Scroll to Top
CALL US NOW