Top Fencing Companies in East Irvine, CA, 92650 | Compare & Call

There are 239 fencing companies server in East Irvine CA

Orange County Property Services

Orange County Property Services

17280 Newhope St, Fountain Valley CA 92627
General Contractors, Fences & Gates, Plumbing

Orange County Property Services serves Fountain Valley, CA, by addressing common local home issues like fence panel cracking and leaning fences. Based in Fountain Valley, we operate near Mile Square R...

Garage Door Springs Diagnostics

Garage Door Springs Diagnostics

215 N Marengo Ave, Pasadena CA 91101
Garage Door Services, Fences & Gates

Garage Door Springs Diagnostics is a family-owned garage door and fencing company serving Pasadena, CA, since 2014. Founded by two brothers, the business brings over a decade of hands-on experience to...

CCP Welding Services

CCP Welding Services

★★★★★ 5.0 / 5 (9)
Baldwin Park CA 91706
Metal Fabricators, Demolition Services, Fences & Gates

CCP Welding Services, based in Baldwin Park, CA, is a licensed and bonded mobile welding company that has been serving the Los Angeles to San Bernardino area since 2015. What started as a childhood ho...

Almighty Garage Doors

Almighty Garage Doors

★★★★★ 4.9 / 5 (71)
Fallbrook CA 92028
Garage Door Services, Fences & Gates

Almighty Garage Doors, a family-owned business established in 2009 by Francisco Villegas Sr., provides comprehensive garage door and gate services to Fallbrook and surrounding San Diego County areas. ...

Killebrew Contracting

Killebrew Contracting

★★★★★ 5.0 / 5 (3)
Corona CA 92881
Fences & Gates, Plumbing, General Contractors

Killebrew Contracting serves the Corona, CA area with a comprehensive range of construction and remodeling services. From kitchen and bathroom remodels to new home construction and structural repairs,...

Nikcon

Nikcon

Norco CA 92860
General Contractors, Fences & Gates

Nikcon Inc, based in Norco, CA, has evolved from a San Gabriel Valley developer into a full-service general contractor specializing in residential and commercial construction. With roots in custom fra...

Ramco Construction

Ramco Construction

★★★★☆ 4.4 / 5 (54)
Orange CA 92867
Masonry/Concrete, Patio Coverings, Fences & Gates

Ramco Construction has been serving Orange County, California since 1977. As a family-owned business, we bring over 30 years of hands-on experience to every project. Our specialty is creating custom o...

Assure Fencing

Assure Fencing

Orange CA 92867
Fences & Gates

Assure Fencing serves homeowners in Orange, CA, specializing in fence and gate installation, repair, painting, staining, weatherproofing, and automatic gate services. Many local homes face fence post ...

Wonders Ornamental Iron

Wonders Ornamental Iron

★★★★★ 4.6 / 5 (11)
1436 W Collins Ave, Orange CA 92868
Metal Fabricators, Fences & Gates, Decks & Railing

Wonders Ornamental Iron has provided custom wrought iron fabrication for residential and commercial clients in Orange County, California for over 20 years. Based in Orange, we serve homeowners and bus...

Rodz Customz Gates

Rodz Customz Gates

★★★★★ 5.0 / 5 (7)
La Mirada CA 90638
Fences & Gates

Rodz Customz Gates is a family-operated fencing and gate company based in La Mirada, CA. We specialize in manual and automatic gate installation, fence building, painting and staining, repairs, and we...



Estimated Fencing Costs in East Irvine, CA

Emergency Fence/Gate RepairStorm / Security Response
$359 - $484
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,294 - $1,729

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for East Irvine. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

How do smart gates integrate with California pool safety laws?

California law requires pool barriers to be at least 60 inches high with self-closing, self-latching gates. Modern smart-gate IoT systems integrate motorized operators with these mechanical latches. The system can send a real-time alert to a homeowner's device if the gate is left ajar, creating a digital audit trail. This combination of a code-compliant physical latch and smart monitoring meets updated 2026 liability standards by demonstrating proactive security measures.

What fence materials withstand East Irvine's soil and pest conditions?

The moderate soil corrosivity index and moderate-to-heavy termite risk dictate material selection. Pressure-treated lumber must be rated for ground contact. All metal fasteners and hardware must be hot-dip galvanized to prevent rust streaks from staining the finish. For steel posts or aluminum fencing, a powder-coated finish over galvanized steel provides dual-layer protection. Avoid untreated wood in direct soil contact, as it is a primary target for subterranean termites common in the area.

What is the typical timeline and route for a consultation?

A structural consultation is typically scheduled within 3-5 business days. The dispatch route from our office near the Jeffrey Open Space Trail uses I-5 for direct access to Portola Springs, resulting in a consistent 25-35 minute travel time. This allows for a site assessment to evaluate wind exposure, grade changes, and precise boundary lines before providing a firm quote based on the $45/hr average labor rate and required materials.

What are the height and placement rules for fences in East Irvine?

Zoning limits are 3.5 feet in the front yard and 6 feet in the rear. The 0-foot setback allows construction directly on the property line. For corner lots, visibility 'sight triangles' are enforced. This means no structure over 3 feet high within 10 feet of the property corner at street intersections. This is critical for driver sightlines, especially for properties near I-5 with high traffic volume. Always verify your lot's classification with the city planning department.

What are the legal steps for replacing a shared fence in East Irvine?

California Civil Code § 841 governs partition fences. Before any work on a shared boundary line, you must provide written notice to the adjoining neighbor. This 2026 legal requirement includes a detailed description of the planned fence, proposed materials, total cost, and a good-faith estimate of each party's share. Failure to provide this notice forfeits your right to recover costs and can lead to a civil dispute. The 0-foot setback on the property line makes correct notification essential.

How does the 105 MPH V-ult wind rating affect fence design?

The V-ult (Ultimate Design Wind Speed) of 105 MPH is the base engineering parameter from ASCE 7-22 standards. This rating dictates post spacing, concrete footing size, and bracket strength. A standard 6-foot-tall fence in an exposure zone near I-5 may require 4x4 posts set on 6-foot centers with 12-inch diameter footings, instead of the typical 8-foot spacing. The goal is to resist the overturning moment from peak storm season gusts without racking or panel blow-out.

What is the process for utility location and permitting?

Call DigAlert (811) at least two working days before excavation. They mark all public underground lines for free. Striking an unmarked private line, like irrigation or low-voltage lighting, is a major liability. For permitting, submit engineered plans showing footing depth, wind load calculations, and a site plan to the East Irvine permit office. Managing this paperwork upfront prevents work stoppages. In Portola Springs, soil conditions often require an inspector to verify the footing depth before concrete is poured.

Why are deep footings critical for fence posts in Portola Springs?

The 12-inch frost line depth in East Irvine requires footings that extend below this plane. Posts set above the frost line are subject to frost heave, where freeze-thaw cycles push the footing upward. This movement cracks post bases and destabilizes the entire structure. For compliance and durability, the International Residential Code (IRC) mandates footings at or below the local frost depth. In Portola Springs, ignoring this standard guarantees premature failure.



Scroll to Top
CALL US NOW