Top Fencing Companies in East Pasadena, CA, 91107 | Compare & Call
There are 238 fencing companies server in East Pasadena CA
Herotec Garage Doors & Gates, based in Canoga Park, CA, is a licensed and insured specialist offering fence and gate installation, repair, and automatic gate services for residential, commercial, and ...
Atwater Fine Carpentry, a small business rooted in Atwater Village, Los Angeles, brings over 15 years of hands-on experience to every project. We specialize in bespoke woodwork, from custom gates and ...
Garcis Welding Shop, based in Los Angeles, specializes in metal fabrication, fence and gate services, and welding repairs for both residential and commercial clients. From custom automatic gates to st...
National Deck & Stair
National Deck & Stair, a family-owned and operated Los Angeles company, has served Huntington Park and the surrounding areas for nearly 20 years. We specialize in waterproof deck and stair coatings, o...
Fence Guys in Rosemead, CA is a licensed fencing contractor owned by Jerson. The company focuses on delivering an exceptional experience from start to finish, with customer satisfaction as the top pri...
LA Fence Craft
LA Fence Craft, based in Duarte, CA, is a licensed and bonded fencing company serving residential and commercial clients since 2016. We specialize in custom fencing solutions using vinyl, wood, and al...
SPC Garage Doors, founded by brothers Tyler and Owen, is a family-owned business serving Los Angeles, CA. With a focus on professionalism and quality workmanship, we specialize in expert garage door i...
Iron Makers is a Los Angeles-based metalwork service specializing in custom security and beautification projects for homes and businesses, including fences, gates, doors, stair rails, and balconies. W...
E & E Custom Iron Works is a family-owned business in La Puente, CA, with over 15 years of experience in wrought iron gates, handrails, motorized gates, and custom metal fabrication. Operating from a ...
Cali Fence, a licensed fencing company established in 2008, brings over 25 years of industry experience to Oak Hills and surrounding areas. Based in Riverside, we serve Orange County, the High Desert,...
Estimated Fencing Costs in East Pasadena, CA
Common Questions
How soon can a crew start, and what's the consultation timeline?
Site consultation typically occurs within 2-3 business days. From Victory Park, the route via the I-210 allows for a 35-45 minute dispatch to most East Pasadena addresses. The current average labor rate is $55 per hour. Construction start depends on permit approval and material lead times.
What fencing materials hold up best against local soil and pests?
Moderate soil corrosivity and termite risk dictate material selection. Use G90 galvanized or powder-coated steel posts and rails. For wood, specify pressure-treated lumber rated for ground contact and stainless-steel fasteners to prevent rust streaks from corroding nails.
What is required before digging fence post holes?
State law requires calling 811 (DigAlert) at least two working days before excavation. Hitting a utility line in East Pasadena incurs major repair costs and liability. The service marks public lines; private lines require a private locate. All permits from the City of Pasadena Building Department must be secured first.
How is my fence designed for high winds?
Design follows ASCE 7-22 for the 105 MPH V-ult wind speed. This engineering standard dictates post spacing, concrete footing size, and bracket strength. A fence in East Pasadena must resist peak storm gusts, requiring deeper footings and reinforced corner posts for lateral stability.
Am I legally required to tell my neighbor I'm replacing our shared fence?
Yes. California Civil Code 841 mandates written notice to adjoining owners before altering a partition fence. In East Pasadena, this 2026 requirement includes a 30-day notice period and a good-faith cost estimate. Failure to notify can result in liability for the full replacement cost.
Can a smart gate also be a safe, code-compliant pool barrier?
Yes, with integrated hardware. A self-closing, self-latching smart gate meeting ASTM F1908-16 standards provides both IoT access control and liability protection. The latch must engage automatically within 5 seconds of closing, achieving the required 60-inch height with a non-climbable design.
What are the height and setback rules for my property line?
Zoning limits are 3.5 feet for front yards and 6 feet for rear yards, with a 0-foot setback allowed. For corner lots, a 10-foot visibility 'sight triangle' from the property corner is enforced. This is critical for safety near high-traffic corridors like I-210.
Why do post footings need to be so deep in East Pasadena?
Frost heave causes structural failure. The IRC requires posts to be set below the 12-inch frost line. Footings above this depth can lift during a freeze, cracking concrete and warping the fence frame. Proper depth ensures stability against seasonal ground movement.
