Top Fencing Companies in East Pasadena, CA, 91107 | Compare & Call
There are 238 fencing companies server in East Pasadena CA
Ben's Gates And Doors
Ben's Gates And Doors is a family-owned and operated company serving Los Angeles, CA. We specialize in the installation and repair of rolling gates, driveway gates, electric fences, and custom gate fa...
J & J Fence and Construction has been a family-owned fencing contractor serving Compton and Los Angeles County since 1978. Fully licensed, bonded, and insured, we specialize in chain link, wrought iro...
Republic Fence in Chatsworth, CA has been a trusted name in fencing and gate contracting since 1951. We specialize in the installation, repair, and maintenance of a wide range of fencing materials, in...
CQ Fence, a family-owned fencing company in Woodland Hills, CA, has over two decades of experience delivering custom fencing and gate solutions. Starting as a subcontractor for Los Angeles general con...
Valley Tree Decking is a general contractor based in Los Angeles, specializing in decks, fences, railings, and pergolas. They use only the highest quality materials—hardwood, aluminum, vinyl, and stee...
Vinyl Land Fencing, a family-owned business established in 2000, serves Baldwin Park and the greater Los Angeles area with high-quality vinyl fencing, gates, decks, and patio covers. We use materials ...
High 5 Fencing is a licensed, bonded, and insured fence contractor serving Lake Los Angeles and surrounding areas. We eliminate the middleman to offer contractor-direct pricing without sacrificing qua...
Metal garage doors gates & fences
Since 2010, MHD Corporation has been a licensed contractor (license #991929) serving Tarzana and the greater Los Angeles area. We specialize in custom metal fabrication, concrete work, and the install...
Founded in 2019 by Dmitrii, HandyMaestro is a licensed fence and gate contractor serving Monterey Park and the greater Los Angeles area. With over 16 years of hands-on construction experience and a ba...
Iron Men Gates & Doors Design
Iron Men Gates & Doors Design is a family-owned business serving the Greater Los Angeles area with over 15 years of experience. We specialize in custom ironwork, including the installation and repair ...
Estimated Fencing Costs in East Pasadena, CA
Common Questions
How soon can a crew start, and what's the consultation timeline?
Site consultation typically occurs within 2-3 business days. From Victory Park, the route via the I-210 allows for a 35-45 minute dispatch to most East Pasadena addresses. The current average labor rate is $55 per hour. Construction start depends on permit approval and material lead times.
What fencing materials hold up best against local soil and pests?
Moderate soil corrosivity and termite risk dictate material selection. Use G90 galvanized or powder-coated steel posts and rails. For wood, specify pressure-treated lumber rated for ground contact and stainless-steel fasteners to prevent rust streaks from corroding nails.
What is required before digging fence post holes?
State law requires calling 811 (DigAlert) at least two working days before excavation. Hitting a utility line in East Pasadena incurs major repair costs and liability. The service marks public lines; private lines require a private locate. All permits from the City of Pasadena Building Department must be secured first.
How is my fence designed for high winds?
Design follows ASCE 7-22 for the 105 MPH V-ult wind speed. This engineering standard dictates post spacing, concrete footing size, and bracket strength. A fence in East Pasadena must resist peak storm gusts, requiring deeper footings and reinforced corner posts for lateral stability.
Am I legally required to tell my neighbor I'm replacing our shared fence?
Yes. California Civil Code 841 mandates written notice to adjoining owners before altering a partition fence. In East Pasadena, this 2026 requirement includes a 30-day notice period and a good-faith cost estimate. Failure to notify can result in liability for the full replacement cost.
Can a smart gate also be a safe, code-compliant pool barrier?
Yes, with integrated hardware. A self-closing, self-latching smart gate meeting ASTM F1908-16 standards provides both IoT access control and liability protection. The latch must engage automatically within 5 seconds of closing, achieving the required 60-inch height with a non-climbable design.
What are the height and setback rules for my property line?
Zoning limits are 3.5 feet for front yards and 6 feet for rear yards, with a 0-foot setback allowed. For corner lots, a 10-foot visibility 'sight triangle' from the property corner is enforced. This is critical for safety near high-traffic corridors like I-210.
Why do post footings need to be so deep in East Pasadena?
Frost heave causes structural failure. The IRC requires posts to be set below the 12-inch frost line. Footings above this depth can lift during a freeze, cracking concrete and warping the fence frame. Proper depth ensures stability against seasonal ground movement.
